- # i3 config file (v4)
- #
- # Please see http://i3wm.org/docs/userguide.html for a complete reference!
- #
- # This config file uses keycodes (bindsym) and was written for the QWERTY
- # layout.
- #
- # To get a config file with the same key positions, but for your current
- # layout, use the i3-config-wizard
- #
- exec /usr/local/bin/compton --no-fading-openclose
- # Font for window titles. Will also be used by the bar unless a different font
- # is used in the bar {} block below.
- font pango:monospace 8
- # This font is widely installed, provides lots of unicode glyphs, right-to-left
- # text rendering and scalability on retina/hidpi displays (thanks to pango).
- #font pango:DejaVu Sans Mono 8
- # Before i3 v4.8, we used to recommend this one as the default:
- # font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
- # The font above is very space-efficient, that is, it looks good, sharp and
- # clear in small sizes. However, its unicode glyph coverage is limited, the old
- # X core fonts rendering does not support right-to-left and this being a bitmap
- # font, it doesn’t scale on retina/hidpi displays.
- set $mod Mod4
- # use these keys for focus, movement, and resize directions when reaching for
- # the arrows is not convenient
- set $up l
- set $down k
- set $left j
- set $right semicolon
- # use Mouse+$mod to drag floating windows to their wanted position
- floating_modifier $mod
- # start a terminal
- bindsym $mod+Return exec i3-sensible-terminal
- # kill focused window
- bindsym $mod+Shift+q kill
- # start dmenu (a program launcher)
- # bindsym $mod+d exec dmenu_run
- # There also is the (new) i3-dmenu-desktop which only displays applications
- # shipping a .desktop file. It is a wrapper around dmenu, so you need that
- # installed.
- bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
- # bindsym $mod+d exec --no-startup-id /usr/local/bin/rofi -show run -lines 3 -eh 3 -width 100 -padding 800 -yoffset -10 -opacity "85" -font "Dejavu Sans Mono 24" -hide-scrollbar
- # change focus
- bindsym $mod+$left focus left
- bindsym $mod+$down focus down
- bindsym $mod+$up focus up
- bindsym $mod+$right focus right
- # alternatively, you can use the cursor keys:
- bindsym $mod+Left focus left
- bindsym $mod+Down focus down
- bindsym $mod+Up focus up
- bindsym $mod+Right focus right
- # move focused window
- bindsym $mod+Shift+$left move left
- bindsym $mod+Shift+$down move down
- bindsym $mod+Shift+$up move up
- bindsym $mod+Shift+$right move right
- # alternatively, you can use the cursor keys:
- bindsym $mod+Shift+Left move left
- bindsym $mod+Shift+Down move down
- bindsym $mod+Shift+Up move up
- bindsym $mod+Shift+Right move right
- # split in horizontal orientation
- bindsym $mod+h split h
- # split in vertical orientation
- bindsym $mod+v split v
- # enter fullscreen mode for the focused container
- bindsym $mod+f fullscreen toggle
- # change container layout (stacked, tabbed, toggle split)
- bindsym $mod+s layout stacking
- bindsym $mod+w layout tabbed
- bindsym $mod+e layout toggle split
- # toggle tiling / floating
- bindsym $mod+Shift+space floating toggle
- # change focus between tiling / floating windows
- bindsym $mod+space focus mode_toggle
- # focus the parent container
- bindsym $mod+a focus parent
- # focus the child container
- #bindsym $mod+d focus child
- # move the currently focused window to the scratchpad
- bindsym $mod+Shift+minus move scratchpad
- # Show the next scratchpad window or hide the focused scratchpad window.
- # If there are multiple scratchpad windows, this command cycles through them.
- bindsym $mod+minus scratchpad show
- # switch to workspace
- bindsym $mod+1 workspace 1
- bindsym $mod+2 workspace 2
- bindsym $mod+3 workspace 3
- bindsym $mod+4 workspace 4
- bindsym $mod+5 workspace 5
- bindsym $mod+6 workspace 6
- bindsym $mod+7 workspace 7
- bindsym $mod+8 workspace 8
- bindsym $mod+9 workspace 9
- bindsym $mod+0 workspace 10
- # move focused container to workspace
- bindsym $mod+Shift+1 move container to workspace 1
- bindsym $mod+Shift+2 move container to workspace 2
- bindsym $mod+Shift+3 move container to workspace 3
- bindsym $mod+Shift+4 move container to workspace 4
- bindsym $mod+Shift+5 move container to workspace 5
- bindsym $mod+Shift+6 move container to workspace 6
- bindsym $mod+Shift+7 move container to workspace 7
- bindsym $mod+Shift+8 move container to workspace 8
- bindsym $mod+Shift+9 move container to workspace 9
- bindsym $mod+Shift+0 move container to workspace 10
- # reload the configuration file
- bindsym $mod+Shift+c reload
- # restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
- bindsym $mod+Shift+r restart
- # exit i3 (logs you out of your X session)
- bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
- # resize window (you can also use the mouse for that)
- mode "resize" {
- # These bindings trigger as soon as you enter the resize mode
- # Pressing left will shrink the window’s width.
- # Pressing right will grow the window’s width.
- # Pressing up will shrink the window’s height.
- # Pressing down will grow the window’s height.
- bindsym $left resize shrink width 10 px or 10 ppt
- bindsym $down resize grow height 10 px or 10 ppt
- bindsym $up resize shrink height 10 px or 10 ppt
- bindsym $right resize grow width 10 px or 10 ppt
- # same bindings, but for the arrow keys
- bindsym Left resize shrink width 10 px or 10 ppt
- bindsym Down resize grow height 10 px or 10 ppt
- bindsym Up resize shrink height 10 px or 10 ppt
- bindsym Right resize grow width 10 px or 10 ppt
- # back to normal: Enter or Escape
- bindsym Return mode "default"
- bindsym Escape mode "default"
- }
- bindsym $mod+r mode "resize"
- # Start i3bar to display a workspace bar (plus the system information i3status
- # finds out, if available)
- bar {
- status_command i3status
- }
- # exec_always --no-startup-id /usr/local/bin/feh -x --scale-bg '/home/blubee/Pictures/wallpapers/shore.jpg'
- # output_format = "i3bar"
- exec_always /usr/local/bin/feh -x --bg-scale '/home/blubee/Pictures/wallpapers/shore.jpg'