1. [ 116.511]
  2. X.Org X Server 1.17.4
  3. Release Date: 2015-10-28
  4. [ 116.511] X Protocol Version 11, Revision 0
  5. [ 116.511] Build Operating System: FreeBSD 11.0-RELEASE-p8 i386
  6. [ 116.511] Current Operating System: FreeBSD FreeBSD 11.0-RELEASE-p8 FreeBSD 11.0-RELEASE-p8 #0: Wed Feb 22 06:06:13 UTC 2017 [email protected]:/usr/obj/usr/src/sys/GENERIC i386
  7. [ 116.511] Build Date: 25 February 2017 06:40:11AM
  8. [ 116.511]
  9. [ 116.511] Current version of pixman: 0.34.0
  10. [ 116.511] Before reporting problems, check http://wiki.x.org
  11. to make sure that you have the latest version.
  12. [ 116.511] Markers: (--) probed, (**) from config file, (==) default setting,
  13. (++) from command line, (!!) notice, (II) informational,
  14. (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
  15. [ 116.512] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 27 11:42:26 2017
  16. [ 116.512] (II) Loader magic: 0x8238ff0
  17. [ 116.512] (II) Module ABI versions:
  18. [ 116.512] X.Org ANSI C Emulation: 0.4
  19. [ 116.512] X.Org Video Driver: 19.0
  20. [ 116.512] X.Org XInput driver : 21.0
  21. [ 116.512] X.Org Server Extension : 9.0
  22. [ 116.512] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21da rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/65536
  23. [ 116.512] (==) Using default built-in configuration (30 lines)
  24. [ 116.512] (==) --- Start of built-in configuration ---
  25. [ 116.512] Section "Device"
  26. [ 116.512] Identifier "Builtin Default intel Device 0"
  27. [ 116.512] Driver "intel"
  28. [ 116.512] EndSection
  29. [ 116.512] Section "Screen"
  30. [ 116.512] Identifier "Builtin Default intel Screen 0"
  31. [ 116.512] Device "Builtin Default intel Device 0"
  32. [ 116.512] EndSection
  33. [ 116.512] Section "Device"
  34. [ 116.512] Identifier "Builtin Default fbdev Device 0"
  35. [ 116.512] Driver "fbdev"
  36. [ 116.512] EndSection
  37. [ 116.512] Section "Screen"
  38. [ 116.512] Identifier "Builtin Default fbdev Screen 0"
  39. [ 116.512] Device "Builtin Default fbdev Device 0"
  40. [ 116.512] EndSection
  41. [ 116.512] Section "Device"
  42. [ 116.512] Identifier "Builtin Default vesa Device 0"
  43. [ 116.512] Driver "vesa"
  44. [ 116.512] EndSection
  45. [ 116.512] Section "Screen"
  46. [ 116.512] Identifier "Builtin Default vesa Screen 0"
  47. [ 116.512] Device "Builtin Default vesa Device 0"
  48. [ 116.512] EndSection
  49. [ 116.512] Section "ServerLayout"
  50. [ 116.512] Identifier "Builtin Default Layout"
  51. [ 116.512] Screen "Builtin Default intel Screen 0"
  52. [ 116.512] Screen "Builtin Default fbdev Screen 0"
  53. [ 116.512] Screen "Builtin Default vesa Screen 0"
  54. [ 116.512] EndSection
  55. [ 116.512] (==) --- End of built-in configuration ---
  56. [ 116.512] (==) ServerLayout "Builtin Default Layout"
  57. [ 116.512] (**) |-->Screen "Builtin Default intel Screen 0" (0)
  58. [ 116.512] (**) | |-->Monitor "<default monitor>"
  59. [ 116.512] (**) | |-->Device "Builtin Default intel Device 0"
  60. [ 116.512] (==) No monitor specified for screen "Builtin Default intel Screen 0".
  61. Using a default monitor configuration.
  62. [ 116.512] (**) |-->Screen "Builtin Default fbdev Screen 0" (1)
  63. [ 116.512] (**) | |-->Monitor "<default monitor>"
  64. [ 116.512] (**) | |-->Device "Builtin Default fbdev Device 0"
  65. [ 116.512] (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
  66. Using a default monitor configuration.
  67. [ 116.512] (**) |-->Screen "Builtin Default vesa Screen 0" (2)
  68. [ 116.512] (**) | |-->Monitor "<default monitor>"
  69. [ 116.512] (**) | |-->Device "Builtin Default vesa Device 0"
  70. [ 116.512] (==) No monitor specified for screen "Builtin Default vesa Screen 0".
  71. Using a default monitor configuration.
  72. [ 116.512] (==) Automatically adding devices
  73. [ 116.512] (==) Automatically enabling devices
  74. [ 116.512] (==) Not automatically adding GPU devices
  75. [ 116.512] (==) FontPath set to:
  76. /usr/local/share/fonts/misc/,
  77. /usr/local/share/fonts/TTF/,
  78. /usr/local/share/fonts/OTF/,
  79. /usr/local/share/fonts/Type1/,
  80. /usr/local/share/fonts/100dpi/,
  81. /usr/local/share/fonts/75dpi/
  82. [ 116.512] (==) ModulePath set to "/usr/local/lib/xorg/modules"
  83. [ 116.512] (II) The server relies on devd to provide the list of input devices.
  84. If no devices become available, reconfigure devd or disable AutoAddDevices.
  85. [ 116.512] (II) LoadModule: "glx"
  86. [ 116.513] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
  87. [ 116.514] (II) Module glx: vendor="X.Org Foundation"
  88. [ 116.514] compiled for 1.17.4, module version = 1.0.0
  89. [ 116.514] ABI class: X.Org Server Extension, version 9.0
  90. [ 116.514] (==) AIGLX enabled
  91. [ 116.514] (II) LoadModule: "intel"
  92. [ 116.514] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
  93. [ 116.514] (II) Module intel: vendor="X.Org Foundation"
  94. [ 116.514] compiled for 1.17.4, module version = 2.21.15
  95. [ 116.514] Module class: X.Org Video Driver
  96. [ 116.514] ABI class: X.Org Video Driver, version 19.0
  97. [ 116.514] (II) LoadModule: "fbdev"
  98. [ 116.514] (WW) Warning, couldn't open module fbdev
  99. [ 116.514] (II) UnloadModule: "fbdev"
  100. [ 116.514] (II) Unloading fbdev
  101. [ 116.514] (EE) Failed to load module "fbdev" (module does not exist, 0)
  102. [ 116.514] (II) LoadModule: "vesa"
  103. [ 116.514] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
  104. [ 116.514] (II) Module vesa: vendor="X.Org Foundation"
  105. [ 116.514] compiled for 1.17.4, module version = 2.3.4
  106. [ 116.514] Module class: X.Org Video Driver
  107. [ 116.514] ABI class: X.Org Video Driver, version 19.0
  108. [ 116.514] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
  109. i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
  110. 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
  111. Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
  112. GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
  113. HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
  114. HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
  115. HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
  116. HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
  117. [ 116.515] (II) VESA: driver for VESA chipsets: vesa
  118. [ 116.515] (--) Using syscons driver with X support (version 2.0)
  119. [ 116.515] (--) using VT number 9
  121. [ 116.517] (WW) Falling back to old probe method for vesa
  122. [ 116.517] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
  123. [ 116.517] (II) intel(0): Creating default Display subsection in Screen section
  124. "Builtin Default intel Screen 0" for depth/fbbpp 24/32
  125. [ 116.517] (==) intel(0): Depth 24, (--) framebuffer bpp 32
  126. [ 116.517] (==) intel(0): RGB weight 888
  127. [ 116.517] (==) intel(0): Default visual is TrueColor
  128. [ 116.517] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
  129. [ 116.517] (**) intel(0): Relaxed fencing enabled
  130. [ 116.517] (**) intel(0): Wait on SwapBuffers? enabled
  131. [ 116.517] (**) intel(0): Triple buffering? enabled
  132. [ 116.517] (**) intel(0): Framebuffer tiled
  133. [ 116.517] (**) intel(0): Pixmaps tiled
  134. [ 116.517] (**) intel(0): 3D buffers tiled
  135. [ 116.517] (**) intel(0): SwapBuffers wait enabled
  136. [ 116.517] (==) intel(0): video overlay key set to 0x101fe
  137. [ 116.517] (II) intel(0): Output LVDS1 has no monitor section
  138. [ 116.522] (II) intel(0): Output VGA1 has no monitor section
  139. [ 116.623] (II) intel(0): Output HDMI1 has no monitor section
  140. [ 116.632] (II) intel(0): Output DP1 has no monitor section
  141. [ 116.637] (II) intel(0): Output HDMI2 has no monitor section
  142. [ 116.642] (II) intel(0): Output HDMI3 has no monitor section
  143. [ 116.651] (II) intel(0): Output DP2 has no monitor section
  144. [ 116.660] (II) intel(0): Output DP3 has no monitor section
  145. [ 116.660] (II) intel(0): EDID for output LVDS1
  146. [ 116.660] (II) intel(0): Manufacturer: AUO Model: 106c Serial#: 0
  147. [ 116.660] (II) intel(0): Year: 2010 Week: 0
  148. [ 116.660] (II) intel(0): EDID Version: 1.4
  149. [ 116.660] (II) intel(0): Digital Display Input
  150. [ 116.660] (II) intel(0): 6 bits per channel
  151. [ 116.660] (II) intel(0): Digital interface is undefined
  152. [ 116.660] (II) intel(0): Max Image Size [cm]: horiz.: 28 vert.: 16
  153. [ 116.660] (II) intel(0): Gamma: 2.20
  154. [ 116.660] (II) intel(0): No DPMS capabilities specified
  155. [ 116.660] (II) intel(0): Supported color encodings: RGB 4:4:4
  156. [ 116.660] (II) intel(0): First detailed timing is preferred mode
  157. [ 116.660] (II) intel(0): Preferred mode is native pixel format and refresh rate
  158. [ 116.660] (II) intel(0): redX: 0.570 redY: 0.334 greenX: 0.328 greenY: 0.570
  159. [ 116.660] (II) intel(0): blueX: 0.159 blueY: 0.146 whiteX: 0.313 whiteY: 0.329
  160. [ 116.660] (II) intel(0): Manufacturer's mask: 0
  161. [ 116.660] (II) intel(0): Supported detailed timing:
  162. [ 116.660] (II) intel(0): clock: 69.3 MHz Image Size: 277 x 156 mm
  163. [ 116.660] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1454 h_border: 0
  164. [ 116.660] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 793 v_border: 0
  165. [ 116.660] (II) intel(0): Unknown vendor-specific block f
  166. [ 116.660] (II) intel(0): AUO
  167. [ 116.660] (II) intel(0): B125XW01 V0
  168. [ 116.660] (II) intel(0): EDID (in hex):
  169. [ 116.661] (II) intel(0): 00ffffffffffff0006af6c1000000000
  170. [ 116.661] (II) intel(0): 00140104901c10780220e59255549228
  171. [ 116.661] (II) intel(0): 25505400000001010101010101010101
  172. [ 116.661] (II) intel(0): 010101010101121b5658500019303020
  173. [ 116.661] (II) intel(0): 3600159c100000180000000f00000000
  174. [ 116.661] (II) intel(0): 00000000000000000020000000fe0041
  175. [ 116.661] (II) intel(0): 554f0a202020202020202020000000fe
  176. [ 116.661] (II) intel(0): 004231323558573031205630200a00ec
  177. [ 116.661] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
  178. [ 116.661] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
  179. [ 116.661] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
  180. [ 116.661] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
  181. [ 116.661] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
  182. [ 116.661] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
  183. [ 116.661] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
  184. [ 116.661] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
  185. [ 116.661] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
  186. [ 116.661] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
  187. [ 116.661] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
  188. [ 116.661] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
  189. [ 116.661] (II) intel(0): Printing probed modes for output LVDS1
  190. [ 116.661] (II) intel(0): Modeline "1366x768"x60.1 69.30 1366 1414 1446 1454 768 771 777 793 -hsync -vsync (47.7 kHz eP)
  191. [ 116.661] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
  192. [ 116.661] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
  193. [ 116.661] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
  194. [ 116.661] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
  195. [ 116.665] (II) intel(0): EDID for output VGA1
  196. [ 116.766] (II) intel(0): EDID for output HDMI1
  197. [ 116.775] (II) intel(0): EDID for output DP1
  198. [ 116.780] (II) intel(0): EDID for output HDMI2
  199. [ 116.785] (II) intel(0): EDID for output HDMI3
  200. [ 116.794] (II) intel(0): EDID for output DP2
  201. [ 116.803] (II) intel(0): EDID for output DP3
  202. [ 116.803] (II) intel(0): Output LVDS1 connected
  203. [ 116.803] (II) intel(0): Output VGA1 disconnected
  204. [ 116.803] (II) intel(0): Output HDMI1 disconnected
  205. [ 116.803] (II) intel(0): Output DP1 disconnected
  206. [ 116.803] (II) intel(0): Output HDMI2 disconnected
  207. [ 116.803] (II) intel(0): Output HDMI3 disconnected
  208. [ 116.803] (II) intel(0): Output DP2 disconnected
  209. [ 116.803] (II) intel(0): Output DP3 disconnected
  210. [ 116.803] (II) intel(0): Using exact sizes for initial modes
  211. [ 116.803] (II) intel(0): Output LVDS1 using initial mode 1366x768
  212. [ 116.803] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
  213. [ 116.803] (II) intel(0): Kernel page flipping support detected, enabling
  214. [ 116.803] (==) intel(0): DPI set to (96, 96)
  215. [ 116.803] (II) Loading sub module "fb"
  216. [ 116.803] (II) LoadModule: "fb"
  217. [ 116.804] (II) Loading /usr/local/lib/xorg/modules/libfb.so
  218. [ 116.804] (II) Module fb: vendor="X.Org Foundation"
  219. [ 116.804] compiled for 1.17.4, module version = 1.0.0
  220. [ 116.804] ABI class: X.Org ANSI C Emulation, version 0.4
  221. [ 116.804] (II) Loading sub module "dri2"
  222. [ 116.804] (II) LoadModule: "dri2"
  223. [ 116.804] (II) Module "dri2" already built-in
  224. [ 116.804] (II) UnloadModule: "vesa"
  225. [ 116.804] (II) Unloading vesa
  226. [ 116.804] (==) Depth 24 pixmap format is 32 bpp
  227. [ 116.804] (II) intel(0): [DRI2] Setup complete
  228. [ 116.804] (II) intel(0): [DRI2] DRI driver: i965
  229. [ 116.804] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
  230. [ 116.805] (II) UXA(0): Driver registered support for the following operations:
  231. [ 116.805] (II) solid
  232. [ 116.805] (II) copy
  233. [ 116.805] (II) composite (RENDER acceleration)
  234. [ 116.805] (II) put_image
  235. [ 116.805] (II) get_image
  236. [ 116.805] (==) intel(0): Backing store enabled
  237. [ 116.805] (==) intel(0): Silken mouse enabled
  238. [ 116.805] (II) intel(0): Initializing HW Cursor
  239. [ 116.805] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
  240. [ 116.805] (==) intel(0): DPMS enabled
  241. [ 116.805] (==) intel(0): Intel XvMC decoder enabled
  242. [ 116.805] (II) intel(0): Set up textured video
  243. [ 116.805] (II) intel(0): [XvMC] xvmc_vld driver initialized.
  244. [ 116.805] (II) intel(0): direct rendering: DRI2 Enabled
  245. [ 116.809] (--) RandR disabled
  246. [ 116.820] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
  247. [ 116.820] (II) AIGLX: enabled GLX_ARB_create_context
  248. [ 116.820] (II) AIGLX: enabled GLX_ARB_create_context_profile
  249. [ 116.820] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
  250. [ 116.820] (II) AIGLX: enabled GLX_INTEL_swap_event
  251. [ 116.820] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
  252. [ 116.820] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
  253. [ 116.820] (II) AIGLX: enabled GLX_ARB_fbconfig_float
  254. [ 116.820] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
  255. [ 116.820] (II) AIGLX: Loaded and initialized i965
  256. [ 116.820] (II) GLX: Initialized DRI2 GL provider for screen 0
  257. [ 116.820] (II) intel(0): Setting screen physical size to 361 x 203
  258. [ 116.902] (II) config/devd: probing input devices...
  259. [ 116.902] (II) config/devd: adding input device (null) (/dev/kbdmux)
  260. [ 116.902] (II) LoadModule: "kbd"
  261. [ 116.902] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
  262. [ 116.902] (II) Module kbd: vendor="X.Org Foundation"
  263. [ 116.902] compiled for 1.17.4, module version = 1.8.1
  264. [ 116.902] Module class: X.Org XInput Driver
  265. [ 116.902] ABI class: X.Org XInput driver, version 21.0
  266. [ 116.902] (II) Using input driver 'kbd' for 'kbdmux'
  267. [ 116.902] (**) kbdmux: always reports core events
  268. [ 116.902] (**) kbdmux: always reports core events
  269. [ 116.902] (**) Option "Protocol" "standard"
  270. [ 116.902] (**) Option "XkbRules" "base"
  271. [ 116.902] (**) Option "XkbModel" "pc105"
  272. [ 116.902] (**) Option "XkbLayout" "us"
  273. [ 116.902] (**) Option "config_info" "devd:kbdmux"
  274. [ 116.902] (II) XINPUT: Adding extended input device "kbdmux" (type: KEYBOARD, id 6)
  275. [ 116.906] (II) config/devd: kbdmux is enabled, ignoring device atkbd0
  276. [ 116.906] (II) config/devd: adding input device (null) (/dev/sysmouse)
  277. [ 116.906] (II) LoadModule: "mouse"
  278. [ 116.906] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
  279. [ 116.906] (II) Module mouse: vendor="X.Org Foundation"
  280. [ 116.906] compiled for 1.17.4, module version = 1.9.1
  281. [ 116.906] Module class: X.Org XInput Driver
  282. [ 116.906] ABI class: X.Org XInput driver, version 21.0
  283. [ 116.906] (II) Using input driver 'mouse' for 'sysmouse'
  284. [ 116.906] (**) sysmouse: always reports core events
  285. [ 116.906] (**) Option "Device" "/dev/sysmouse"
  286. [ 116.906] (==) sysmouse: Protocol: "Auto"
  287. [ 116.906] (**) sysmouse: always reports core events
  288. [ 116.906] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50
  289. [ 116.906] (**) sysmouse: ZAxisMapping: buttons 4 and 5
  290. [ 116.906] (**) sysmouse: Buttons: 5
  291. [ 116.906] (**) Option "config_info" "devd:sysmouse"
  292. [ 116.906] (II) XINPUT: Adding extended input device "sysmouse" (type: MOUSE, id 7)
  293. [ 116.906] (**) sysmouse: (accel) keeping acceleration scheme 1
  294. [ 116.906] (**) sysmouse: (accel) acceleration profile 0
  295. [ 116.906] (**) sysmouse: (accel) acceleration factor: 2.000
  296. [ 116.906] (**) sysmouse: (accel) acceleration threshold: 4
  297. [ 116.906] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0
  298. [ 116.906] (II) sysmouse: SetupAuto: protocol is SysMouse
  299. [ 116.906] (II) config/devd: device /dev/psm0 already opened
  300. [ 117.207] (II) intel(0): EDID vendor "AUO", prod id 4204
  301. [ 117.207] (II) intel(0): Printing DDC gathered Modelines:
  302. [ 117.207] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1454 768 771 777 793 -hsync -vsync (47.7 kHz eP)
  303. [ 117.994] (II) intel(0): EDID vendor "AUO", prod id 4204
  304. [ 117.994] (II) intel(0): Printing DDC gathered Modelines:
  305. [ 117.994] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1454 768 771 777 793 -hsync -vsync (47.7 kHz eP)
  306. [ 118.136] (II) intel(0): EDID vendor "AUO", prod id 4204
  307. [ 118.136] (II) intel(0): Printing DDC gathered Modelines:
  308. [ 118.136] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1454 768 771 777 793 -hsync -vsync (47.7 kHz eP)
  309. [ 119.743] (II) config/devd: terminating backend...
  310. [ 119.743] (II) UnloadModule: "mouse"
  311. [ 119.743] (II) UnloadModule: "kbd"
  312. [ 120.018] (II) Server terminated successfully (0). Closing log file.