Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Nov2014]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos2)/boot/grub.
=> Windows 7/8/2012 is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Linux Mint 17 Qiana
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda3: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda4: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Arch Linux ()
Boot files: /boot/grub/grub.cfg /etc/fstab
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 2,048 1,074,219,007 1,074,216,960 83 Linux
/dev/sda2 * 1,074,219,008 1,152,344,063 78,125,056 83 Linux
/dev/sda3 1,152,346,110 1,160,157,183 7,811,074 5 Extended
/dev/sda5 1,152,346,112 1,160,157,183 7,811,072 82 Linux swap / Solaris
/dev/sda4 1,160,157,184 1,250,263,039 90,105,856 83 Linux
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 2,048 976,773,119 976,771,072 7 NTFS / exFAT / HPFS
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 9b23c485-d625-4ec0-9605-df5fe0d9dddc ext4
/dev/sda2 5f231255-2661-4f21-9944-c795c9e10493 ext4
/dev/sda4 da42ec45-fd19-4505-8c23-8b63ff6371b8 ext4 arch
/dev/sda5 a72bb60e-8790-4cc1-95e4-5d70220eea7d swap
/dev/sdb1 0BA390A65B961AD0 ntfs SP3
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Nov 30 10:57 ata-TOSHIBA_MQ01ABD050_64DJPHF8T -> ../../sdb
lrwxrwxrwx 1 root root 9 Nov 30 10:57 ata-WDC_WD6400BPVT-60HXZT1_WD-WXB1A41R8984 -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 30 07:17 ata-WDC_WD6400BPVT-60HXZT1_WD-WXB1A41R8984-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Nov 30 07:17 ata-WDC_WD6400BPVT-60HXZT1_WD-WXB1A41R8984-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Nov 30 07:17 ata-WDC_WD6400BPVT-60HXZT1_WD-WXB1A41R8984-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Nov 30 07:17 ata-WDC_WD6400BPVT-60HXZT1_WD-WXB1A41R8984-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Nov 30 07:17 ata-WDC_WD6400BPVT-60HXZT1_WD-WXB1A41R8984-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Nov 30 07:17 ata-hp_DVDRAM_GT31L_M3XB5U94507 -> ../../sr0
lrwxrwxrwx 1 root root 10 Nov 30 07:17 usb-PHD_3.0_Silicon-Power_DB_140162410700314#0000-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Nov 30 10:57 wwn-0x5000039592a84e58 -> ../../sdb
lrwxrwxrwx 1 root root 9 Nov 30 10:57 wwn-0x50014ee656954d08 -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 30 07:17 wwn-0x50014ee656954d08-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Nov 30 07:17 wwn-0x50014ee656954d08-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Nov 30 07:17 wwn-0x50014ee656954d08-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Nov 30 07:17 wwn-0x50014ee656954d08-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Nov 30 07:17 wwn-0x50014ee656954d08-part5 -> ../../sda5
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /home ext4 (rw)
/dev/sda2 / ext4 (rw,errors=remount-ro)
/dev/sda4 /media/att/arch ext4 (rw,nosuid,nodev,uhelper=udisks2)
/dev/sdb1 /media/att/SP3 fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 5f231255-2661-4f21-9944-c795c9e10493
else
search --no-floppy --fs-uuid --set=root 5f231255-2661-4f21-9944-c795c9e10493
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/06_mint_theme ###
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
### END /etc/grub.d/06_mint_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="$1"
if [ "$1" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Linux Mint 17 KDE 64-bit, 3.13.0-24-generic (/dev/sda2)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 5f231255-2661-4f21-9944-c795c9e10493
else
search --no-floppy --fs-uuid --set=root 5f231255-2661-4f21-9944-c795c9e10493
fi
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=5f231255-2661-4f21-9944-c795c9e10493 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-24-generic
}
menuentry 'Linux Mint 17 KDE 64-bit, 3.13.0-24-generic (/dev/sda2) -- recovery mode' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 5f231255-2661-4f21-9944-c795c9e10493
else
search --no-floppy --fs-uuid --set=root 5f231255-2661-4f21-9944-c795c9e10493
fi
echo 'Loading Linux 3.13.0-24-generic ...'
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=5f231255-2661-4f21-9944-c795c9e10493 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-24-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 5f231255-2661-4f21-9944-c795c9e10493
else
search --no-floppy --fs-uuid --set=root 5f231255-2661-4f21-9944-c795c9e10493
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 5f231255-2661-4f21-9944-c795c9e10493
else
search --no-floppy --fs-uuid --set=root 5f231255-2661-4f21-9944-c795c9e10493
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Arch (on /dev/sda4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-da42ec45-fd19-4505-8c23-8b63ff6371b8' {
insmod part_msdos
insmod ext2
set root='hd0,msdos4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos4 --hint-efi=hd0,msdos4 --hint-baremetal=ahci0,msdos4 da42ec45-fd19-4505-8c23-8b63ff6371b8
else
search --no-floppy --fs-uuid --set=root da42ec45-fd19-4505-8c23-8b63ff6371b8
fi
linux /boot/vmlinuz-linux root=UUID=ad4103fa-d940-47ca-8506-301d8071d467 rw quiet
initrd /boot/initramfs-linux.img
}
submenu 'Advanced options for Arch (on /dev/sda4)' $menuentry_id_option 'osprober-gnulinux-advanced-da42ec45-fd19-4505-8c23-8b63ff6371b8' {
menuentry 'Arch Linux, with Linux core repo kernel (on /dev/sda4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-linux--da42ec45-fd19-4505-8c23-8b63ff6371b8' {
insmod part_msdos
insmod ext2
set root='hd0,msdos4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos4 --hint-efi=hd0,msdos4 --hint-baremetal=ahci0,msdos4 da42ec45-fd19-4505-8c23-8b63ff6371b8
else
search --no-floppy --fs-uuid --set=root da42ec45-fd19-4505-8c23-8b63ff6371b8
fi
linux /boot/vmlinuz-linux root=UUID=ad4103fa-d940-47ca-8506-301d8071d467 rw quiet
initrd /boot/initramfs-linux.img
}
menuentry 'Arch Linux, with Linux core repo kernel (Fallback initramfs) (on /dev/sda4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-linux--da42ec45-fd19-4505-8c23-8b63ff6371b8' {
insmod part_msdos
insmod ext2
set root='hd0,msdos4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos4 --hint-efi=hd0,msdos4 --hint-baremetal=ahci0,msdos4 da42ec45-fd19-4505-8c23-8b63ff6371b8
else
search --no-floppy --fs-uuid --set=root da42ec45-fd19-4505-8c23-8b63ff6371b8
fi
linux /boot/vmlinuz-linux root=UUID=ad4103fa-d940-47ca-8506-301d8071d467 rw quiet
initrd /boot/initramfs-linux-fallback.img
}
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=5f231255-2661-4f21-9944-c795c9e10493 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda1 during installation
UUID=9b23c485-d625-4ec0-9605-df5fe0d9dddc /home ext4 defaults 0 2
# swap was on /dev/sda5 during installation
UUID=a72bb60e-8790-4cc1-95e4-5d70220eea7d none swap sw 0 0
--------------------------------------------------------------------------------
=========================== sda4/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 ad4103fa-d940-47ca-8506-301d8071d467
else
search --no-floppy --fs-uuid --set=root ad4103fa-d940-47ca-8506-301d8071d467
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-ad4103fa-d940-47ca-8506-301d8071d467' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 ad4103fa-d940-47ca-8506-301d8071d467
else
search --no-floppy --fs-uuid --set=root ad4103fa-d940-47ca-8506-301d8071d467
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=ad4103fa-d940-47ca-8506-301d8071d467 rw quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
}
menuentry 'Arch Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-ad4103fa-d940-47ca-8506-301d8071d467' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 ad4103fa-d940-47ca-8506-301d8071d467
else
search --no-floppy --fs-uuid --set=root ad4103fa-d940-47ca-8506-301d8071d467
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=ad4103fa-d940-47ca-8506-301d8071d467 rw quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda4/etc/fstab: ================================
--------------------------------------------------------------------------------
#
# /etc/fstab: static file system information
#
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sdb4 LABEL=arch
UUID=da42ec45-fd19-4505-8c23-8b63ff6371b8 / ext4 rw,relatime,data=ordered 0 1
UUID=a72bb60e-8790-4cc1-95e4-5d70220eea7d swap swap defaults 0 0
--------------------------------------------------------------------------------
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda3
00000000 03 69 01 ab 2a 1a 30 09 f6 17 2c ba e8 bb c5 fb |.i..*.0...,.....|
00000010 d1 92 04 08 ba 15 a4 a0 b4 29 c5 8b 71 68 e5 c0 |.........)..qh..|
00000020 b9 a8 5e 06 ed 92 ee 22 83 55 59 63 26 77 ab 03 |..^....".UYc&w..|
00000030 89 ed 3c 9a 30 44 4a 0e 85 10 fa aa f2 5c dc 2a |..<.0DJ......\.*|
00000040 59 12 d2 76 ae 8a c4 68 08 2d 5b a4 13 29 f0 23 |Y..v...h.-[..).#|
00000050 51 41 04 0f a2 29 4f 98 02 a6 a7 4a 56 17 9c c9 |QA...)O....JV...|
00000070 aa 1d c4 a5 85 47 62 8f 6d 5d 67 83 0e e5 aa 84 |.....Gb.m]g.....|
00000080 6a c7 2f 7a d5 1c 9a 56 df ed ee eb 3b fc 8b 27 |j./z...V....;..'|
00000090 b9 a8 cd b3 ac ac 49 3a 26 03 60 97 ff a1 2f 4d |......I:&.`.../M|
000000a0 92 8a d2 6b dc a8 ba 86 14 04 bb 72 f5 02 e8 97 |...k.......r....|
000000b0 44 88 17 71 1a b0 30 84 a4 a1 1b a8 0a cb 96 38 |D..q..0........8|
000000c0 0d 82 5b 33 87 71 60 c4 2a d2 6d 43 3b c1 90 c4 |..[3.q`.*.mC;...|
000000d0 9f 46 89 6f 6d 47 d3 ef c3 cb 57 22 03 6d 09 ed |.F.omG....W".m..|
000000e0 e9 c3 93 8d 53 43 5c e5 6a 71 d4 5a 18 c1 1e db |....SC\.jq.Z....|
000000f0 f0 31 5b 67 81 e0 3f 83 06 1d fc 18 0e 03 0f 02 |.1[g..?.........|
00000100 18 29 5a 48 d8 ff e3 e4 cd fd a6 bd de df cc b7 |.)ZH............|
00000110 3b c1 10 e7 f2 ac bb 57 3d 1a ca cb 79 ec 47 fb |;......W=...y.G.|
00000120 c7 01 fd 3b 9d ce f3 4a d1 5b 46 10 5c 48 84 ff |...;...J.[F.\H..|
00000130 b3 2a c8 11 40 1f 3a 0e 34 f6 a6 28 a3 7a bd 37 |.*..@.:.4..(.z.7|
00000140 7b 60 dc d5 e4 08 bd 9d e7 41 62 1c 12 f5 18 ba |{`.......Ab.....|
00000150 21 3f a3 28 3b e2 2b d0 4c 03 60 ae 6d be 06 f7 |!?.(;.+.L.`.m...|
00000160 b1 12 f3 bd e5 a4 91 00 9e ff b8 a4 30 8b f1 15 |............0...|
00000170 5d 07 28 c9 01 da da ba 98 b6 72 76 70 93 93 b0 |].(.......rvp...|
00000180 a7 97 a8 78 84 8e 99 fc e2 99 0d 94 f5 15 ef 50 |...x...........P|
00000190 71 74 42 24 50 78 7a fe 85 41 73 5e 70 14 c5 94 |qtB$Pxz..As^p...|
000001a0 2e c3 a1 d0 87 b5 96 16 59 26 2c c0 e5 e5 fa b3 |........Y&,.....|
000001b0 2d 64 6e d6 ff f6 24 49 bd ba 73 ca 6e f3 00 fe |-dn...$I..s.n...|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 30 77 00 00 00 |...........0w...|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
cat: write error: Broken pipe
File descriptor 9 (/proc/13053/mounts) leaked on lvs invocation. Parent PID 22729: bash
File descriptor 63 (pipe:[176456]) leaked on lvs invocation. Parent PID 22729: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-11-30__10h57 ===================
boot-repair version : 4ppa14
boot-sav version : 4ppa14
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version :
File descriptor 9 (/proc/13053/mounts) leaked on lvs invocation. Parent PID 14552: /bin/sh
No volume groups found
boot-repair is executed in installed-session (Linux Mint 17 Qiana, qiana, LinuxMint, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=5f231255-2661-4f21-9944-c795c9e10493 ro quiet splash vt.handoff=7
=================== os-prober:
/dev/sda2:The OS now in use - Linux Mint 17 Qiana CurrentSession:linux
/dev/sda4::Arch:linux
=================== blkid:
/dev/sda1: UUID="9b23c485-d625-4ec0-9605-df5fe0d9dddc" TYPE="ext4"
/dev/sda2: UUID="5f231255-2661-4f21-9944-c795c9e10493" TYPE="ext4"
/dev/sda4: LABEL="arch" UUID="da42ec45-fd19-4505-8c23-8b63ff6371b8" TYPE="ext4"
/dev/sda5: UUID="a72bb60e-8790-4cc1-95e4-5d70220eea7d" TYPE="swap"
/dev/sdb1: LABEL="SP3" UUID="0BA390A65B961AD0" TYPE="ntfs"
1 disks with OS, 2 OS : 2 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Nov 25 09:26 grub.d
total 76
-rwxr-xr-x 1 root root 9424 Apu 11 2014 00_header
-rwxr-xr-x 1 root root 6058 Apu 10 2014 05_debian_theme
-rwxr-xr-x 1 root root 1183 Oki 23 2011 06_mint_theme
-rwxr-xr-x 1 root root 7500 Nov 30 07:17 10_linux
-rwxr-xr-x 1 root root 10412 Apu 11 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 Mar 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 Apu 11 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 Apu 11 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Apu 11 2014 40_custom
-rwxr-xr-x 1 root root 216 Apu 11 2014 41_custom
-rw-r--r-- 1 root root 483 Apu 11 2014 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== /media/att/arch/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Oki 27 23:07 grub.d
total 64
-rwxr-xr-x 1 root root 8875 Oki 27 23:07 00_header
-rwxr-xr-x 1 root root 9867 Oki 27 23:07 10_linux
-rwxr-xr-x 1 root root 10250 Oki 27 23:07 20_linux_xen
-rwxr-xr-x 1 root root 10883 Oki 27 23:07 30_os-prober
-rwxr-xr-x 1 root root 214 Oki 27 23:07 40_custom
-rwxr-xr-x 1 root root 216 Oki 27 23:07 41_custom
-rwxr-xr-x 1 root root 1219 Oki 27 23:07 60_memtest86+
-rw-r--r-- 1 root root 483 Oki 27 23:07 README
=================== /media/att/arch/etc/default/grub :
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
#GRUB_SAVEDEFAULT="true"
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sda1 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /home.
sda4 : sda, not-sepboot, no-grubenv grub2, no-docgrub, grub-mkconfig -o /boot/grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, pacman, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /media/att/arch.
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /media/att/SP3.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, usb-disk, no-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA WDC WD6400BPVT-6 (scsi)
Disk /dev/sda: 640GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 550GB 550GB primary ext4
2 550GB 590GB 40.0GB primary ext4 boot
3 590GB 594GB 3999MB extended
5 590GB 594GB 3999MB logical linux-swap(v1)
4 594GB 640GB 46.1GB primary ext4
Model: PHD 3.0 Silicon-Power DB (scsi)
Disk /dev/sdb: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 500GB 500GB primary ntfs
=================== parted -lm:
BYT;
/dev/sda:640GB:scsi:512:4096:msdos:ATA WDC WD6400BPVT-6;
1:1049kB:550GB:550GB:ext4::;
2:550GB:590GB:40.0GB:ext4::boot;
3:590GB:594GB:3999MB:::;
5:590GB:594GB:3999MB:linux-swap(v1)::;
4:594GB:640GB:46.1GB:ext4::;
BYT;
/dev/sdb:500GB:scsi:512:4096:msdos:PHD 3.0 Silicon-Power DB;
1:1049kB:500GB:500GB:ntfs::;
=================== mount:
/dev/sda2 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
/dev/sda1 on /home type ext4 (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
/dev/sda4 on /media/att/arch type ext4 (rw,nosuid,nodev,uhelper=udisks2)
/dev/sdb1 on /media/att/SP3 type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fb1 fd freefall full fuse hidraw0 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sdb1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 57 38 3a 00 00 00 00 |.........W8:....|
00000030 04 00 00 00 00 00 00 00 7f 85 a3 03 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 d0 1a 96 5b a6 90 a3 0b |...........[....|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 d2 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 40 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |@.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a e9 6a 01 |U...h..fa.....j.|
00000110 90 90 66 60 1e 06 66 a1 11 00 66 03 06 1c 00 1e |..f`..f...f.....|
00000120 66 68 00 00 00 00 66 50 06 53 68 01 00 68 10 00 |fh....fP.Sh..h..|
00000130 b4 42 8a 16 0e 00 16 1f 8b f4 cd 13 66 59 5b 5a |.B..........fY[Z|
00000140 66 59 66 59 1f 0f 82 16 00 66 ff 06 11 00 03 16 |fYfY.....f......|
00000150 0f 00 8e c2 ff 0e 16 00 75 bc 07 1f 66 61 c3 a0 |........u...fa..|
00000160 f8 01 e8 08 00 a0 fb 01 e8 02 00 eb fe b4 01 8b |................|
00000170 f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 |..<.t...........|
00000180 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 20 65 72 |..A disk read er|
00000190 72 6f 72 20 6f 63 63 75 72 72 65 64 00 0d 0a 42 |ror occurred...B|
000001a0 4f 4f 54 4d 47 52 20 69 73 20 6d 69 73 73 69 6e |OOTMGR is missin|
000001b0 67 00 0d 0a 42 4f 4f 54 4d 47 52 20 69 73 20 63 |g...BOOTMGR is c|
000001c0 6f 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 |ompressed...Pres|
000001d0 73 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 |s Ctrl+Alt+Del t|
000001e0 6f 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 |o restart.......|
000001f0 00 00 00 00 00 00 00 00 80 9d b2 ca 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda2 ext4 37G 12G 23G 35% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
udev devtmpfs 1.9G 12K 1.9G 1% /dev
tmpfs tmpfs 389M 1.4M 388M 1% /run
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.9G 25M 1.9G 2% /run/shm
none tmpfs 100M 8.0K 100M 1% /run/user
/dev/sda1 ext4 505G 40G 439G 9% /home
/dev/sda4 ext4 43G 14G 27G 34% /media/att/arch
/dev/sdb1 fuseblk 466G 364G 103G 78% /media/att/SP3
=================== fdisk -l:
Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xf7c4b322
Device Boot Start End Blocks Id System
/dev/sda1 2048 1074219007 537108480 83 Linux
/dev/sda2 * 1074219008 1152344063 39062528 83 Linux
/dev/sda3 1152346110 1160157183 3905537 5 Extended
Partition 3 does not start on physical sector boundary.
/dev/sda4 1160157184 1250263039 45052928 83 Linux
/dev/sda5 1152346112 1160157183 3905536 82 Linux swap / Solaris
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x04b1b9fb
Device Boot Start End Blocks Id System
/dev/sdb1 2048 976773119 488385536 7 HPFS/NTFS/exFAT
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda2 into the MBRs of all disks (except USB without OS).
The boot flag would be placed on sdb1.
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sda (640GB) disk!
The boot files of [The OS now in use - Linux Mint 17 Qiana] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition)
=================== User settings
The settings chosen by the user will not act on the boot.
pastebinit packages needed
debconf: unable to initialize frontend: Dialog
debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (This frontend requires a controlling tty.)
debconf: falling back to frontend: Teletype
dpkg-preconfigure: unable to re-open stdin: