- Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
- ============================= Boot Info Summary: ===============================
- => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
- the same hard drive for core.img. core.img is at this location and looks
- for (,msdos1)/grub.
- => No known boot loader is installed in the MBR of /dev/sdb.
- sda1: __________________________________________________________________________
- File system: ext4
- Boot sector type: -
- Boot sector info:
- Operating System:
- Boot files: /grub/grub.cfg /grub/i386-pc/core.img
- sda2: __________________________________________________________________________
- File system: ext4
- Boot sector type: -
- Boot sector info:
- Operating System: Linux Mint 17.1 Rebecca
- Boot files: /etc/fstab
- sda3: __________________________________________________________________________
- File system: swap
- Boot sector type: -
- Boot sector info:
- sda4: __________________________________________________________________________
- File system: ext4
- Boot sector type: -
- Boot sector info:
- Operating System:
- Boot files:
- sdb1: __________________________________________________________________________
- File system: iso9660
- Boot sector type: Unknown
- Boot sector info:
- Mounting failed: mount: /dev/sdb1 already mounted or /mnt/BootInfo/sdb1 busy
- sdb2: __________________________________________________________________________
- File system: vfat
- Boot sector type: FAT16
- Boot sector info: According to the info in the boot sector, sdb2 starts
- at sector 0. But according to the info from fdisk,
- sdb2 starts at sector 2958600. According to the info
- in the boot sector, sdb2 has 0 sectors.
- Mounting failed: mount: /dev/sdb1 already mounted or /mnt/BootInfo/sdb1 busy
- mount: /dev/sdb2 already mounted or /mnt/BootInfo/sdb2 busy
- ============================ Drive/Partition Info: =============================
- Drive: sda _____________________________________________________________________
- Disk /dev/sda: 500.1 GB, 500107862016 bytes
- 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
- Units = sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- Partition Boot Start Sector End Sector # of Sectors Id System
- /dev/sda1 * 2,048 1,025,485 1,023,438 83 Linux
- /dev/sda2 17,410,048 68,610,047 51,200,000 83 Linux
- /dev/sda3 1,026,048 17,410,047 16,384,000 82 Linux swap / Solaris
- /dev/sda4 68,610,048 976,773,119 908,163,072 83 Linux
- Drive: sdb _____________________________________________________________________
- Disk /dev/sdb: 4009 MB, 4009754624 bytes
- 255 heads, 63 sectors/track, 487 cylinders, total 7831552 sectors
- Units = sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- Partition Boot Start Sector End Sector # of Sectors Id System
- /dev/sdb1 * 0 3,026,591 3,026,592 0 Empty
- /dev/sdb2 2,958,600 2,963,143 4,544 ef EFI (FAT-12/16/32)
- /dev/sdb1 overlaps with /dev/sdb2
- GUID Partition Table detected, but does not seem to be used.
- Partition Start Sector End Sector # of Sectors System
- /dev/sdb1 0 3,026,535 3,026,536 Data partition (Windows/Linux)
- /dev/sdb2 2,958,600 2,963,143 4,544 Data partition (Windows/Linux)
- "blkid" output: ________________________________________________________________
- Device UUID TYPE LABEL
- /dev/loop0 squashfs
- /dev/sda1 76b419ee-21dc-485f-bcc0-2eb5bfc0e49e ext4
- /dev/sda2 97bf1c82-9cc8-4c3f-8ebb-0e1865e885a9 ext4
- /dev/sda3 b80a8e45-a471-4bbb-8bb0-eb0fe7eb8116 swap
- /dev/sda4 71437bdb-f979-44ca-aaaa-6dd02ae2e969 ext4
- /dev/sdb1 iso9660 Linux Mint 17.1 Cinnamon 64-bit
- /dev/sdb2 0D6C-F933 vfat
- ========================= "ls -l /dev/disk/by-id" output: ======================
- total 0
- lrwxrwxrwx 1 root root 9 May 19 17:29 ata-HL-DT-ST_DVD+_-RW_GT10N -> ../../sr0
- lrwxrwxrwx 1 root root 9 May 19 17:52 ata-ST95005620AS_5YX1JV7Y -> ../../sda
- lrwxrwxrwx 1 root root 10 May 19 17:29 ata-ST95005620AS_5YX1JV7Y-part1 -> ../../sda1
- lrwxrwxrwx 1 root root 10 May 19 17:29 ata-ST95005620AS_5YX1JV7Y-part2 -> ../../sda2
- lrwxrwxrwx 1 root root 10 May 19 17:29 ata-ST95005620AS_5YX1JV7Y-part3 -> ../../sda3
- lrwxrwxrwx 1 root root 10 May 19 17:29 ata-ST95005620AS_5YX1JV7Y-part4 -> ../../sda4
- lrwxrwxrwx 1 root root 9 May 19 17:52 usb-Lexar_USB_Flash_Drive_G8FYVWR2FM674D1SXBQE-0:0 -> ../../sdb
- lrwxrwxrwx 1 root root 10 May 19 17:29 usb-Lexar_USB_Flash_Drive_G8FYVWR2FM674D1SXBQE-0:0-part1 -> ../../sdb1
- lrwxrwxrwx 1 root root 10 May 19 17:29 usb-Lexar_USB_Flash_Drive_G8FYVWR2FM674D1SXBQE-0:0-part2 -> ../../sdb2
- lrwxrwxrwx 1 root root 9 May 19 17:52 wwn-0x5000c50044b4d220 -> ../../sda
- lrwxrwxrwx 1 root root 10 May 19 17:29 wwn-0x5000c50044b4d220-part1 -> ../../sda1
- lrwxrwxrwx 1 root root 10 May 19 17:29 wwn-0x5000c50044b4d220-part2 -> ../../sda2
- lrwxrwxrwx 1 root root 10 May 19 17:29 wwn-0x5000c50044b4d220-part3 -> ../../sda3
- lrwxrwxrwx 1 root root 10 May 19 17:29 wwn-0x5000c50044b4d220-part4 -> ../../sda4
- ================================ Mount points: =================================
- Device Mount_Point Type Options
- /dev/loop0 /rofs squashfs (ro,noatime)
- /dev/sdb /cdrom iso9660 (ro,noatime)
- ============================= sda1/grub/grub.cfg: ==============================
- --------------------------------------------------------------------------------
- #
- # DO NOT EDIT THIS FILE
- #
- # It is automatically generated by grub-mkconfig using templates
- # from /etc/grub.d and settings from /etc/default/grub
- #
- ### BEGIN /etc/grub.d/00_header ###
- if [ -s $prefix/grubenv ]; then
- set have_grubenv=true
- load_env
- fi
- if [ "${next_entry}" ] ; then
- set default="${next_entry}"
- set next_entry=
- save_env next_entry
- set boot_once=true
- else
- set default="0"
- fi
- if [ x"${feature_menuentry_id}" = xy ]; then
- menuentry_id_option="--id"
- else
- menuentry_id_option=""
- fi
- export menuentry_id_option
- if [ "${prev_saved_entry}" ]; then
- set saved_entry="${prev_saved_entry}"
- save_env saved_entry
- set prev_saved_entry=
- save_env prev_saved_entry
- set boot_once=true
- fi
- function savedefault {
- if [ -z "${boot_once}" ]; then
- saved_entry="${chosen}"
- save_env saved_entry
- fi
- }
- function recordfail {
- set recordfail=1
- if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
- }
- function load_video {
- if [ x$feature_all_video_module = xy ]; then
- insmod all_video
- else
- insmod efi_gop
- insmod efi_uga
- insmod ieee1275_fb
- insmod vbe
- insmod vga
- insmod video_bochs
- insmod video_cirrus
- fi
- }
- if [ x$feature_default_font_path = xy ] ; then
- font=unicode
- else
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos2'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 97bf1c82-9cc8-4c3f-8ebb-0e1865e885a9
- else
- search --no-floppy --fs-uuid --set=root 97bf1c82-9cc8-4c3f-8ebb-0e1865e885a9
- fi
- font="/usr/share/grub/unicode.pf2"
- fi
- if loadfont $font ; then
- set gfxmode=auto
- load_video
- insmod gfxterm
- set locale_dir=$prefix/locale
- set lang=en_US
- insmod gettext
- fi
- terminal_output gfxterm
- if [ "${recordfail}" = 1 ] ; then
- set timeout=-1
- else
- if [ x$feature_timeout_style = xy ] ; then
- set timeout_style=menu
- set timeout=30
- # Fallback normal timeout code in case the timeout_style feature is
- # unavailable.
- else
- set timeout=30
- fi
- fi
- ### END /etc/grub.d/00_header ###
- ### BEGIN /etc/grub.d/05_debian_theme ###
- set menu_color_normal=white/black
- set menu_color_highlight=black/light-gray
- ### END /etc/grub.d/05_debian_theme ###
- ### BEGIN /etc/grub.d/06_mint_theme ###
- set menu_color_normal=white/black
- set menu_color_highlight=white/light-gray
- ### END /etc/grub.d/06_mint_theme ###
- ### BEGIN /etc/grub.d/10_linux ###
- function gfxmode {
- set gfxpayload="$1"
- if [ "$1" = "keep" ]; then
- set vt_handoff=vt.handoff=7
- else
- set vt_handoff=
- fi
- }
- if [ ${recordfail} != 1 ]; then
- if [ -e ${prefix}/gfxblacklist.txt ]; then
- if hwmatch ${prefix}/gfxblacklist.txt 3; then
- if [ ${match} = 0 ]; then
- set linux_gfx_mode=keep
- else
- set linux_gfx_mode=text
- fi
- else
- set linux_gfx_mode=text
- fi
- else
- set linux_gfx_mode=keep
- fi
- else
- set linux_gfx_mode=text
- fi
- export linux_gfx_mode
- if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
- menuentry 'Linux Mint 17.1 Cinnamon 64-bit, 3.13.0-37-generic (/dev/sda1)' --class ubuntu --class gnu-linux --class gnu --class os {
- recordfail
- gfxmode $linux_gfx_mode
- insmod gzio
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos1'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 76b419ee-21dc-485f-bcc0-2eb5bfc0e49e
- else
- search --no-floppy --fs-uuid --set=root 76b419ee-21dc-485f-bcc0-2eb5bfc0e49e
- fi
- linux /vmlinuz-3.13.0-37-generic root=UUID=97bf1c82-9cc8-4c3f-8ebb-0e1865e885a9 ro quiet splash nomdmonddf nomdmonisw $vt_handoff
- initrd /initrd.img-3.13.0-37-generic
- }
- menuentry 'Linux Mint 17.1 Cinnamon 64-bit, 3.13.0-37-generic (/dev/sda1) -- recovery mode' --class ubuntu --class gnu-linux --class gnu --class os {
- recordfail
- insmod gzio
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos1'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 76b419ee-21dc-485f-bcc0-2eb5bfc0e49e
- else
- search --no-floppy --fs-uuid --set=root 76b419ee-21dc-485f-bcc0-2eb5bfc0e49e
- fi
- echo 'Loading Linux 3.13.0-37-generic ...'
- linux /vmlinuz-3.13.0-37-generic root=UUID=97bf1c82-9cc8-4c3f-8ebb-0e1865e885a9 ro recovery nomodeset
- echo 'Loading initial ramdisk ...'
- initrd /initrd.img-3.13.0-37-generic
- }
- ### END /etc/grub.d/10_linux ###
- ### BEGIN /etc/grub.d/10_lupin ###
- ### END /etc/grub.d/10_lupin ###
- ### BEGIN /etc/grub.d/20_linux_xen ###
- ### END /etc/grub.d/20_linux_xen ###
- ### BEGIN /etc/grub.d/20_memtest86+ ###
- menuentry 'Memory test (memtest86+)' {
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos1'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 76b419ee-21dc-485f-bcc0-2eb5bfc0e49e
- else
- search --no-floppy --fs-uuid --set=root 76b419ee-21dc-485f-bcc0-2eb5bfc0e49e
- fi
- knetbsd /memtest86+.elf
- }
- menuentry 'Memory test (memtest86+, serial console 115200)' {
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos1'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 76b419ee-21dc-485f-bcc0-2eb5bfc0e49e
- else
- search --no-floppy --fs-uuid --set=root 76b419ee-21dc-485f-bcc0-2eb5bfc0e49e
- fi
- linux16 /memtest86+.bin console=ttyS0,115200n8
- }
- ### END /etc/grub.d/20_memtest86+ ###
- ### BEGIN /etc/grub.d/30_os-prober ###
- ### END /etc/grub.d/30_os-prober ###
- ### BEGIN /etc/grub.d/30_uefi-firmware ###
- ### END /etc/grub.d/30_uefi-firmware ###
- ### BEGIN /etc/grub.d/40_custom ###
- # This file provides an easy way to add custom menu entries. Simply type the
- # menu entries you want to add after this comment. Be careful not to change
- # the 'exec tail' line above.
- ### END /etc/grub.d/40_custom ###
- ### BEGIN /etc/grub.d/41_custom ###
- if [ -f ${config_directory}/custom.cfg ]; then
- source ${config_directory}/custom.cfg
- elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
- source $prefix/custom.cfg;
- fi
- ### END /etc/grub.d/41_custom ###
- --------------------------------------------------------------------------------
- =============================== sda2/etc/fstab: ================================
- --------------------------------------------------------------------------------
- # /etc/fstab: static file system information.
- #
- # Use 'blkid' to print the universally unique identifier for a
- # device; this may be used with UUID= as a more robust way to name devices
- # that works even if disks are added and removed. See fstab(5).
- #
- # <file system> <mount point> <type> <options> <dump> <pass>
- # / was on /dev/sda2 during installation
- UUID=97bf1c82-9cc8-4c3f-8ebb-0e1865e885a9 / ext4 errors=remount-ro 0 1
- # /boot was on /dev/sda1 during installation
- #UUID=76b419ee-21dc-485f-bcc0-2eb5bfc0e49e /boot ext4 defaults 0 2
- # /home was on /dev/sda4 during installation
- UUID=71437bdb-f979-44ca-aaaa-6dd02ae2e969 /home ext4 defaults 0 2
- # swap was on /dev/sda3 during installation
- UUID=b80a8e45-a471-4bbb-8bb0-eb0fe7eb8116 none swap sw 0 0
- # Auto Mount NFS Exports from DS212 @ 192.168.42.1 to /mnt
- 192.168.42.1:/ /mnt nfs auto 0 0
- UUID=76b419ee-21dc-485f-bcc0-2eb5bfc0e49e /boot ext4 defaults 0 2
- --------------------------------------------------------------------------------
- ======================== Unknown MBRs/Boot Sectors/etc: ========================
- Unknown MBR on /dev/sdb
- 00000000 45 52 08 00 00 00 90 90 00 00 00 00 00 00 00 00 |ER..............|
- 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
- 00000020 33 ed fa 8e d5 bc 00 7c fb fc 66 31 db 66 31 c9 |3......|..f1.f1.|
- 00000030 66 53 66 51 06 57 8e dd 8e c5 52 be 00 7c bf 00 |fSfQ.W....R..|..|
- 00000040 06 b9 00 01 f3 a5 ea 4b 06 00 00 52 b4 41 bb aa |.......K...R.A..|
- 00000050 55 31 c9 30 f6 f9 cd 13 72 16 81 fb 55 aa 75 10 |U1.0....r...U.u.|
- 00000060 83 e1 01 74 0b 66 c7 06 f1 06 b4 42 eb 15 eb 00 |...t.f.....B....|
- 00000070 5a 51 b4 08 cd 13 83 e1 3f 5b 51 0f b6 c6 40 50 |ZQ......?[Q...@P|
- 00000080 f7 e1 53 52 50 bb 00 7c b9 04 00 66 a1 b0 07 e8 |..SRP..|...f....|
- 000000a0 40 7c fb c0 78 70 75 09 fa bc ec 7b ea 44 7c 00 |@|..xpu....{.D|.|
- 000000b0 00 e8 83 00 69 73 6f 6c 69 6e 75 78 2e 62 69 6e |....isolinux.bin|
- 000000c0 20 6d 69 73 73 69 6e 67 20 6f 72 20 63 6f 72 72 | missing or corr|
- 000000d0 75 70 74 2e 0d 0a 66 60 66 31 d2 66 03 06 f8 7b |upt...f`f1.f...{|
- 000000e0 66 13 16 fc 7b 66 52 66 50 06 53 6a 01 6a 10 89 |f...{fRfP.Sj.j..|
- 000000f0 e6 66 f7 36 e8 7b c0 e4 06 88 e1 88 c5 92 f6 36 |.f.6.{.........6|
- 00000100 ee 7b 88 c6 08 e1 41 b8 01 02 8a 16 f2 7b cd 13 |.{....A......{..|
- 00000110 8d 64 10 66 61 c3 e8 1e 00 4f 70 65 72 61 74 69 |.d.fa....Operati|
- 00000120 6e 67 20 73 79 73 74 65 6d 20 6c 6f 61 64 20 65 |ng system load e|
- 00000130 72 72 6f 72 2e 0d 0a 5e ac b4 0e 8a 3e 62 04 b3 |rror...^....>b..|
- 00000140 07 cd 10 3c 0a 75 f1 cd 18 f4 eb fd 00 00 00 00 |...<.u..........|
- 00000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
- 00000160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
- 00000170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
- 00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
- 00000190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
- 000001a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
- 000001b0 f0 1f 2d 00 00 00 00 00 3f c9 b7 6f 00 00 80 00 |..-.....?..o....|
- 000001c0 01 00 00 5c e0 f8 00 00 00 00 a0 2e 2e 00 00 fe |...\............|
- 000001d0 ff ff ef fe ff ff 08 25 2d 00 c0 11 00 00 00 00 |.......%-.......|
- 000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
- 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
- 00000200
- Unknown BootLoader on sdb1
- 00000000 45 52 08 00 00 00 90 90 00 00 00 00 00 00 00 00 |ER..............|
- 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
- 00000020 33 ed fa 8e d5 bc 00 7c fb fc 66 31 db 66 31 c9 |3......|..f1.f1.|
- 00000030 66 53 66 51 06 57 8e dd 8e c5 52 be 00 7c bf 00 |fSfQ.W....R..|..|
- 00000040 06 b9 00 01 f3 a5 ea 4b 06 00 00 52 b4 41 bb aa |.......K...R.A..|
- 00000050 55 31 c9 30 f6 f9 cd 13 72 16 81 fb 55 aa 75 10 |U1.0....r...U.u.|
- 00000060 83 e1 01 74 0b 66 c7 06 f1 06 b4 42 eb 15 eb 00 |...t.f.....B....|
- 00000070 5a 51 b4 08 cd 13 83 e1 3f 5b 51 0f b6 c6 40 50 |ZQ......?[Q...@P|
- 00000080 f7 e1 53 52 50 bb 00 7c b9 04 00 66 a1 b0 07 e8 |..SRP..|...f....|
- 000000a0 40 7c fb c0 78 70 75 09 fa bc ec 7b ea 44 7c 00 |@|..xpu....{.D|.|
- 000000b0 00 e8 83 00 69 73 6f 6c 69 6e 75 78 2e 62 69 6e |....isolinux.bin|
- 000000c0 20 6d 69 73 73 69 6e 67 20 6f 72 20 63 6f 72 72 | missing or corr|
- 000000d0 75 70 74 2e 0d 0a 66 60 66 31 d2 66 03 06 f8 7b |upt...f`f1.f...{|
- 000000e0 66 13 16 fc 7b 66 52 66 50 06 53 6a 01 6a 10 89 |f...{fRfP.Sj.j..|
- 000000f0 e6 66 f7 36 e8 7b c0 e4 06 88 e1 88 c5 92 f6 36 |.f.6.{.........6|
- 00000100 ee 7b 88 c6 08 e1 41 b8 01 02 8a 16 f2 7b cd 13 |.{....A......{..|
- 00000110 8d 64 10 66 61 c3 e8 1e 00 4f 70 65 72 61 74 69 |.d.fa....Operati|
- 00000120 6e 67 20 73 79 73 74 65 6d 20 6c 6f 61 64 20 65 |ng system load e|
- 00000130 72 72 6f 72 2e 0d 0a 5e ac b4 0e 8a 3e 62 04 b3 |rror...^....>b..|
- 00000140 07 cd 10 3c 0a 75 f1 cd 18 f4 eb fd 00 00 00 00 |...<.u..........|
- 00000150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
- *
- 000001b0 f0 1f 2d 00 00 00 00 00 3f c9 b7 6f 00 00 80 00 |..-.....?..o....|
- 000001c0 01 00 00 5c e0 f8 00 00 00 00 a0 2e 2e 00 00 fe |...\............|
- 000001d0 ff ff ef fe ff ff 08 25 2d 00 c0 11 00 00 00 00 |.......%-.......|
- 000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
- 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
- 00000200
- =============================== StdErr Messages: ===============================
- cat: write error: Broken pipe
- File descriptor 9 (/proc/4353/mounts) leaked on lvs invocation. Parent PID 14816: bash
- File descriptor 63 (pipe:[49912]) leaked on lvs invocation. Parent PID 14816: bash
- No volume groups found
- ADDITIONAL INFORMATION :
- =================== log of boot-info 2015-05-19__17h52 ===================
- boot-info version : 4ppa33
- boot-sav version : 4ppa33
- glade2script version : 3.2.2~ppa47~saucy
- boot-sav-extra version :
- grub-probe: error: cannot find a GRUB drive for /dev/sdb1. Check your device.map.
- boot-info is executed in live-session (Linux Mint 17.1 Rebecca, rebecca, LinuxMint, x86_64)
- CPU op-mode(s): 32-bit, 64-bit
- file=/cdrom/preseed/linuxmint.seed boot=casper initrd=/casper/initrd.lz quiet splash -- BOOT_IMAGE=/casper/vmlinuz
- ls: cannot access /home/usr/.config: No such file or directory
- mount: /dev/sdb2 already mounted or /mnt/boot-sav/sdb2 busy
- mount /dev/sdb2 : Error code 32
- mount -r /dev/sdb2 /mnt/boot-sav/sdb2
- mount: /dev/sdb2 already mounted or /mnt/boot-sav/sdb2 busy
- mount -r /dev/sdb2 : Error code 32
- WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
- WARNING: GPT (GUID Partition Table) detected on '/dev/sdb1'! The util fdisk doesn't support GPT. Use GNU Parted.
- =================== os-prober:
- /dev/sda2:Linux Mint 17.1 Rebecca (17.1):LinuxMint:linux
- =================== blkid:
- /dev/loop0: TYPE="squashfs"
- /dev/sda1: UUID="76b419ee-21dc-485f-bcc0-2eb5bfc0e49e" TYPE="ext4"
- /dev/sda2: UUID="97bf1c82-9cc8-4c3f-8ebb-0e1865e885a9" TYPE="ext4"
- /dev/sda3: UUID="b80a8e45-a471-4bbb-8bb0-eb0fe7eb8116" TYPE="swap"
- /dev/sda4: UUID="71437bdb-f979-44ca-aaaa-6dd02ae2e969" TYPE="ext4"
- /dev/sdb1: LABEL="Linux Mint 17.1 Cinnamon 64-bit" TYPE="iso9660"
- /dev/sdb2: SEC_TYPE="msdos" UUID="0D6C-F933" TYPE="vfat"
- 1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
- mount: /dev/sdb2 already mounted or /mnt/boot-sav/sdb2 busy
- mount /dev/sdb2 : Error code 32
- mount -r /dev/sdb2 /mnt/boot-sav/sdb2
- mount: /dev/sdb2 already mounted or /mnt/boot-sav/sdb2 busy
- mount -r /dev/sdb2 : Error code 32
- dd: invalid number ‘0’
- Warning: /var/log/boot-sav/log/2015-05-19__17h52boot-info02/sdb/current_mbr.img could not be created. Please report this message to [email protected]
- WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util sfdisk doesn't support GPT. Use GNU Parted.
- WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
- WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
- =================== sda1recordfail=1/grub/grubenv :
- recordfail=1
- =================== sda2/etc/grub.d/ :
- drwxr-xr-x 2 root root 4096 Nov 26 22:46 grub.d
- total 88
- -rwxr-xr-x 1 root root 9424 May 15 2014 00_header
- -rwxr-xr-x 1 root root 6058 May 8 2014 05_debian_theme
- -rwxr-xr-x 1 root root 1180 Oct 25 2014 06_mint_theme
- -rwxr-xr-x 1 root root 7500 May 19 08:58 10_linux
- -rwxr-xr-x 1 root root 10634 Oct 1 2012 10_lupin
- -rwxr-xr-x 1 root root 10412 May 15 2014 20_linux_xen
- -rwxr-xr-x 1 root root 1992 Mar 12 2014 20_memtest86+
- -rwxr-xr-x 1 root root 11692 May 15 2014 30_os-prober
- -rwxr-xr-x 1 root root 1416 May 15 2014 30_uefi-firmware
- -rwxr-xr-x 1 root root 214 May 15 2014 40_custom
- -rwxr-xr-x 1 root root 216 May 15 2014 41_custom
- -rw-r--r-- 1 root root 483 May 15 2014 README
- =================== sda2/etc/default/grub :
- # If you change this file, run 'update-grub' afterwards to update
- # /boot/grub/grub.cfg.
- # For full documentation of the options in this file, see:
- # info -f grub -n 'Simple configuration'
- GRUB_DEFAULT=0
- #GRUB_HIDDEN_TIMEOUT=0
- GRUB_HIDDEN_TIMEOUT_QUIET=true
- GRUB_TIMEOUT=30
- GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
- GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
- GRUB_CMDLINE_LINUX=""
- # Uncomment to enable BadRAM filtering, modify to suit your needs
- # This works with Linux (no patch required) and with any kernel that obtains
- # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
- #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
- # Uncomment to disable graphical terminal (grub-pc only)
- #GRUB_TERMINAL=console
- # The resolution used on graphical terminal
- # note that you can use only modes which your graphic card supports via VBE
- # you can see them in real GRUB with the command `vbeinfo'
- #GRUB_GFXMODE=640x480
- # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
- #GRUB_DISABLE_LINUX_UUID=true
- # Uncomment to disable generation of recovery mode menu entries
- #GRUB_DISABLE_RECOVERY="true"
- # Uncomment to get a beep at grub start
- #GRUB_INIT_TUNE="480 440 1"
- /boot detected in the fstab of sda2: UUID=76b419ee-21dc-485f-bcc0-2eb5bfc0e49e (sda1)
- =================== sda2/etc/mdadm/mdadm.conf :
- # mdadm.conf
- #
- # Please refer to mdadm.conf(5) for information about this file.
- #
- # by default (built-in), scan all partitions (/proc/partitions) and all
- # containers for MD superblocks. alternatively, specify devices to scan, using
- # wildcards if desired.
- #DEVICE partitions containers
- # auto-create devices with Debian standard permissions
- CREATE owner=root group=disk mode=0660 auto=yes
- # automatically tag new arrays as belonging to the local system
- HOMEHOST <system>
- # instruct the monitoring daemon where to send mail alerts
- MAILADDR root
- # definitions of existing MD arrays
- ARRAY /dev/md/2 metadata=1.2 UUID=fe475eaa:9eb5e67f:06219619:606c41c6 name=DS212:2
- # This file was auto-generated on Mon, 05 Jan 2015 19:18:59 +0200
- # by mkconf $Id$
- =================== UEFI/Legacy mode:
- This live-session is not in EFI-mode.
- SecureBoot maybe enabled.
- =================== PARTITIONS & DISKS:
- sda1 : sda, is-sepboot, grubenv-ng nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
- sda2 : sda, not-sepboot, no-grubenv grub2, grub-pc , update-grub, 64, no-boot, is-os, not--efi--part, fstab-has-goodBOOT, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2.
- sda4 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda4.
- sdb2 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sdb2.
- sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
- sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, usb-disk, no-os, 0 sectors * 512 bytes
- =================== parted -l:
- Model: ATA ST95005620AS (scsi)
- Disk /dev/sda: 500GB
- Sector size (logical/physical): 512B/512B
- Partition Table: msdos
- Number Start End Size Type File system Flags
- 1 1049kB 525MB 524MB primary ext4 boot
- 3 525MB 8914MB 8389MB primary linux-swap(v1)
- 2 8914MB 35.1GB 26.2GB primary ext4
- 4 35.1GB 500GB 465GB primary ext4
- Warning: /dev/sdb contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table?
- Error: The backup GPT table is not at the end of the disk, as it should be. This might mean that another operating system believes the disk is smaller. Fix, by moving the backup to the end (and removing the old backup)?
- Warning: Not all of the space available to /dev/sdb appears to be used, you can fix the GPT to use all of the space (an extra 4804960 blocks) or continue with the current setting?
- Error: Unable to satisfy all constraints on the partition.
- =================== parted -lm:
- BYT;
- /dev/sda:500GB:scsi:512:512:msdos:ATA ST95005620AS;
- 1:1049kB:525MB:524MB:ext4::boot;
- 3:525MB:8914MB:8389MB:linux-swap(v1)::;
- 2:8914MB:35.1GB:26.2GB:ext4::;
- 4:35.1GB:500GB:465GB:ext4::;
- Warning: /dev/sdb contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table?
- Error: The backup GPT table is not at the end of the disk, as it should be. This might mean that another operating system believes the disk is smaller. Fix, by moving the backup to the end (and removing the old backup)?
- Warning: Not all of the space available to /dev/sdb appears to be used, you can fix the GPT to use all of the space (an extra 4804960 blocks) or continue with the current setting?
- Error: Unable to satisfy all constraints on the partition.
- =================== lsblk:
- KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
- sda disk 465.8G ST950056
- sda1 part ext4 499.7M 76b419ee-21dc-485f-bcc0-2eb5bfc0e49e
- sda2 part ext4 24.4G 97bf1c82-9cc8-4c3f-8ebb-0e1865e885a9
- sda3 part swap 7.8G b80a8e45-a471-4bbb-8bb0-eb0fe7eb8116
- sda4 part ext4 433G 71437bdb-f979-44ca-aaaa-6dd02ae2e969
- sdb disk iso9660 3.8G Linux Mint 17.1 Cinnamon 64-bit
- USB Flas
- sdb1 part iso9660 1.5G Linux Mint 17.1 Cinnamon 64-bit
- sdb2 part vfat 2.2M 0D6C-F933
- sr0 rom 1024M DVD+-RW
- loop0 loop squashfs 1.4G
- KNAME ROTA RO RM STATE MOUNTPOINT
- sda 1 0 0 running
- sda1 1 0 0 /mnt/boot-sav/sda1
- sda2 1 0 0 /mnt/boot-sav/sda2
- sda3 1 0 0 [SWAP]
- sda4 1 0 0 /mnt/boot-sav/sda4
- sdb 1 0 1 running
- sdb1 1 0 1
- sdb2 1 0 1
- sr0 1 0 1 running
- loop0 1 1 0 /rofs
- =================== mount:
- /cow on / type overlayfs (rw)
- proc on /proc type proc (rw,noexec,nosuid,nodev)
- sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
- udev on /dev type devtmpfs (rw,mode=0755)
- devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
- tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
- /dev/sdb on /cdrom type iso9660 (ro,noatime)
- /dev/loop0 on /rofs type squashfs (ro,noatime)
- none on /sys/fs/cgroup type tmpfs (rw)
- none on /sys/fs/fuse/connections type fusectl (rw)
- none on /sys/kernel/debug type debugfs (rw)
- none on /sys/kernel/security type securityfs (rw)
- tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
- none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
- none on /run/shm type tmpfs (rw,nosuid,nodev)
- none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
- none on /sys/fs/pstore type pstore (rw)
- binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
- systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
- gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=mint)
- /dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw)
- /dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw)
- /dev/sda4 on /mnt/boot-sav/sda4 type ext4 (rw)
- =================== ls:
- /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 size slaves stat subsystem trace uevent
- /sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
- /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
- /dev (filtered): agpgart autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sdb sdb1 sdb2 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vga_arbiter vhci vhost-net video0 zero
- ls /dev/mapper: control
- =================== hexdump -n512 -C /dev/sdb2
- 00000000 eb 3c 90 6d 6b 64 6f 73 66 73 00 00 02 04 01 00 |.<.mkdosfs......|
- 00000010 02 00 02 c0 11 f8 04 00 20 00 40 00 00 00 00 00 |........ .@.....|
- 00000020 00 00 00 00 00 00 29 33 f9 6c 0d 20 20 20 20 20 |......)3.l. |
- 00000030 20 20 20 20 20 20 46 41 54 31 32 20 20 20 0e 1f | FAT12 ..|
- 00000040 be 5b 7c ac 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 |.[|.".t.V.......|
- 00000050 5e eb f0 32 e4 cd 16 cd 19 eb fe 54 68 69 73 20 |^..2.......This |
- 00000060 69 73 20 6e 6f 74 20 61 20 62 6f 6f 74 61 62 6c |is not a bootabl|
- 00000070 65 20 64 69 73 6b 2e 20 20 50 6c 65 61 73 65 20 |e disk. Please |
- 00000080 69 6e 73 65 72 74 20 61 20 62 6f 6f 74 61 62 6c |insert a bootabl|
- 00000090 65 20 66 6c 6f 70 70 79 20 61 6e 64 0d 0a 70 72 |e floppy and..pr|
- 000000a0 65 73 73 20 61 6e 79 20 6b 65 79 20 74 6f 20 74 |ess any key to t|
- 000000b0 72 79 20 61 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 |ry again ... ...|
- 000000c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
- *
- 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
- 00000200
- WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
- WARNING: GPT (GUID Partition Table) detected on '/dev/sdb1'! The util fdisk doesn't support GPT. Use GNU Parted.
- =================== df -Th:
- Filesystem Type Size Used Avail Use% Mounted on
- /cow overlayfs 3.9G 380M 3.5G 10% /
- udev devtmpfs 3.8G 12K 3.8G 1% /dev
- tmpfs tmpfs 779M 1.4M 778M 1% /run
- /dev/sdb iso9660 1.5G 1.5G 0 100% /cdrom
- /dev/loop0 squashfs 1.5G 1.5G 0 100% /rofs
- none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
- tmpfs tmpfs 3.9G 20K 3.9G 1% /tmp
- none tmpfs 5.0M 0 5.0M 0% /run/lock
- none tmpfs 3.9G 740K 3.9G 1% /run/shm
- none tmpfs 100M 12K 100M 1% /run/user
- /dev/sda1 ext4 476M 46M 402M 11% /mnt/boot-sav/sda1
- /dev/sda2 ext4 24G 15G 8.5G 63% /mnt/boot-sav/sda2
- /dev/sda4 ext4 427G 294G 111G 73% /mnt/boot-sav/sda4
- =================== fdisk -l:
- Disk /dev/sda: 500.1 GB, 500107862016 bytes
- 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
- Units = sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disk identifier: 0x000e45c4
- Device Boot Start End Blocks Id System
- /dev/sda1 * 2048 1025485 511719 83 Linux
- /dev/sda2 17410048 68610047 25600000 83 Linux
- /dev/sda3 1026048 17410047 8192000 82 Linux swap / Solaris
- /dev/sda4 68610048 976773119 454081536 83 Linux
- Partition table entries are not in disk order
- Disk /dev/sdb: 4009 MB, 4009754624 bytes
- 255 heads, 63 sectors/track, 487 cylinders, total 7831552 sectors
- Units = sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disk identifier: 0x6fb7c93f
- Device Boot Start End Blocks Id System
- /dev/sdb1 * 0 3026591 1513296 0 Empty
- /dev/sdb2 2958600 2963143 2272 ef EFI (FAT-12/16/32)
- Disk /dev/sdb1: 1549 MB, 1549615104 bytes
- 255 heads, 63 sectors/track, 188 cylinders, total 3026592 sectors
- Units = sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disk identifier: 0x6fb7c93f
- Device Boot Start End Blocks Id System
- /dev/sdb1p1 * 0 3026591 1513296 0 Empty
- /dev/sdb1p2 2958600 2963143 2272 ef EFI (FAT-12/16/32)
- gui-tab-other.sh: line 94: _checkbutton_repairfilesystems: command not found
- =================== Suggested repair
- The default repair of the Boot-Repair utility would reinstall the grub2 of sda2 into the MBRs of all disks (except USB without OS), using the following options: sda1/boot,
- The boot flag would be placed on sdb2.
- Additional repair would be performed: unhide-bootmenu-10s repair-filesystems
- =================== Final advice in case of suggested repair
- Please do not forget to make your BIOS boot on sda (500GB) disk!
- =================== User settings
- The settings chosen by the user will not act on the boot.
- pastebinit packages needed
- W: Failed to fetch cdrom://Linux Mint 17.1 _Rebecca_ - Release amd64 20141126/dists/trusty/contrib/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
- W: Failed to fetch cdrom://Linux Mint 17.1 _Rebecca_ - Release amd64 20141126/dists/trusty/main/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
- W: Failed to fetch cdrom://Linux Mint 17.1 _Rebecca_ - Release amd64 20141126/dists/trusty/non-free/binary-i386/Packages Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
- E: Some index files failed to download. They have been ignored, or old ones used instead.
- dpkg-preconfigure: unable to re-open stdin: No such file or directory