- Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
- ============================= Boot Info Summary: ===============================
- => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
- the same hard drive for core.img. core.img is at this location and looks
- for (,msdos5)/boot/grub.
- => Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdb.
- sda1: __________________________________________________________________________
- File system: ntfs
- Boot sector type: Windows 8/2012: NTFS
- Boot sector info: No errors found in the Boot Parameter Block.
- Operating System:
- Boot files: /bootmgr /Boot/BCD
- sda2: __________________________________________________________________________
- File system: ntfs
- Boot sector type: Windows 8/2012: NTFS
- Boot sector info: No errors found in the Boot Parameter Block.
- Operating System:
- Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
- sda3: __________________________________________________________________________
- File system: Extended Partition
- Boot sector type: FAT16
- Boot sector info:
- sda5: __________________________________________________________________________
- File system: ext4
- Boot sector type: Grub2 (v1.99-2.00)
- Boot sector info: Grub2 (v2.00) is installed in the boot sector of sda5
- and looks at sector 606316544 of the same hard drive
- for core.img. core.img is at this location and looks
- for (,msdos5)/boot/grub.
- Operating System: Linux Mint 17.2 Rafaela
- Boot files: /boot/grub/grub.cfg /etc/fstab
- /boot/grub/i386-pc/core.img
- sda6: __________________________________________________________________________
- File system: swap
- Boot sector type: -
- Boot sector info:
- sdb1: __________________________________________________________________________
- File system: vfat
- Boot sector type: SYSLINUX 4.03 2010-10-22 ........>..sr>..........9...0...~.....~...f...M.f.f....f..0~....>E}.u......
- Boot sector info: Syslinux looks at sector 2995768 of /dev/sdb1 for its
- second stage. SYSLINUX is installed in the directory.
- No errors found in the Boot Parameter Block.
- Operating System:
- Boot files: /boot/grub/grub.cfg /syslinux.cfg /ldlinux.sys
- ============================ Drive/Partition Info: =============================
- Drive: sda _____________________________________________________________________
- Disk /dev/sda: 320.1 GB, 320072933376 bytes
- 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
- Units = sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- Partition Boot Start Sector End Sector # of Sectors Id System
- /dev/sda1 * 2,048 1,026,047 1,024,000 7 NTFS / exFAT / HPFS
- /dev/sda2 1,026,048 582,565,887 581,539,840 7 NTFS / exFAT / HPFS
- /dev/sda3 582,567,934 625,141,706 42,573,773 5 Extended
- /dev/sda5 584,624,128 625,141,706 40,517,579 83 Linux
- /dev/sda6 582,567,936 584,624,127 2,056,192 82 Linux swap / Solaris
- Drive: sdb _____________________________________________________________________
- Disk /dev/sdb: 4004 MB, 4004511744 bytes
- 218 heads, 51 sectors/track, 703 cylinders, total 7821312 sectors
- Units = sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- Partition Boot Start Sector End Sector # of Sectors Id System
- /dev/sdb1 * 2,048 7,821,311 7,819,264 b W95 FAT32
- "blkid" output: ________________________________________________________________
- Device UUID TYPE LABEL
- /dev/loop0 squashfs
- /dev/sda1 BA82C01E82BFDCD7 ntfs Зарезервировано системой
- /dev/sda2 6C58588C585856C4 ntfs
- /dev/sda5 6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6 ext4
- /dev/sda6 3345fc2b-5fb2-4e44-a9fa-922774d10186 swap
- /dev/sdb1 249A-A027 vfat LINUX MINT
- ========================= "ls -l /dev/disk/by-id" output: ======================
- total 0
- lrwxrwxrwx 1 root root 9 Feb 8 2016 ata-MATSHITA_DVD+_-RW_UJ-875S_fG5E8537 -> ../../sr0
- lrwxrwxrwx 1 root root 9 Feb 8 22:14 ata-ST9320320AS_5SX2G0X6 -> ../../sda
- lrwxrwxrwx 1 root root 10 Feb 8 22:14 ata-ST9320320AS_5SX2G0X6-part1 -> ../../sda1
- lrwxrwxrwx 1 root root 10 Feb 8 22:14 ata-ST9320320AS_5SX2G0X6-part2 -> ../../sda2
- lrwxrwxrwx 1 root root 10 Feb 8 2016 ata-ST9320320AS_5SX2G0X6-part3 -> ../../sda3
- lrwxrwxrwx 1 root root 10 Feb 8 2016 ata-ST9320320AS_5SX2G0X6-part5 -> ../../sda5
- lrwxrwxrwx 1 root root 10 Feb 8 2016 ata-ST9320320AS_5SX2G0X6-part6 -> ../../sda6
- lrwxrwxrwx 1 root root 9 Feb 8 22:13 usb-SanDisk_Cruzer_Blade_2006258463142B325C6C-0:0 -> ../../sdb
- lrwxrwxrwx 1 root root 10 Feb 8 2016 usb-SanDisk_Cruzer_Blade_2006258463142B325C6C-0:0-part1 -> ../../sdb1
- lrwxrwxrwx 1 root root 9 Feb 8 22:14 wwn-0x5000c50011ac29b2 -> ../../sda
- lrwxrwxrwx 1 root root 10 Feb 8 22:14 wwn-0x5000c50011ac29b2-part1 -> ../../sda1
- lrwxrwxrwx 1 root root 10 Feb 8 22:14 wwn-0x5000c50011ac29b2-part2 -> ../../sda2
- lrwxrwxrwx 1 root root 10 Feb 8 2016 wwn-0x5000c50011ac29b2-part3 -> ../../sda3
- lrwxrwxrwx 1 root root 10 Feb 8 2016 wwn-0x5000c50011ac29b2-part5 -> ../../sda5
- lrwxrwxrwx 1 root root 10 Feb 8 2016 wwn-0x5000c50011ac29b2-part6 -> ../../sda6
- ================================ Mount points: =================================
- Device Mount_Point Type Options
- /dev/loop0 /rofs squashfs (ro,noatime)
- /dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
- =========================== sda5/boot/grub/grub.cfg: ===========================
- --------------------------------------------------------------------------------
- #
- # DO NOT EDIT THIS FILE
- #
- # It is automatically generated by grub-mkconfig using templates
- # from /etc/grub.d and settings from /etc/default/grub
- #
- ### BEGIN /etc/grub.d/00_header ###
- if [ -s $prefix/grubenv ]; then
- set have_grubenv=true
- load_env
- fi
- if [ "${next_entry}" ] ; then
- set default="${next_entry}"
- set next_entry=
- save_env next_entry
- set boot_once=true
- else
- set default="0"
- fi
- if [ x"${feature_menuentry_id}" = xy ]; then
- menuentry_id_option="--id"
- else
- menuentry_id_option=""
- fi
- export menuentry_id_option
- if [ "${prev_saved_entry}" ]; then
- set saved_entry="${prev_saved_entry}"
- save_env saved_entry
- set prev_saved_entry=
- save_env prev_saved_entry
- set boot_once=true
- fi
- function savedefault {
- if [ -z "${boot_once}" ]; then
- saved_entry="${chosen}"
- save_env saved_entry
- fi
- }
- function recordfail {
- set recordfail=1
- if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
- }
- function load_video {
- if [ x$feature_all_video_module = xy ]; then
- insmod all_video
- else
- insmod efi_gop
- insmod efi_uga
- insmod ieee1275_fb
- insmod vbe
- insmod vga
- insmod video_bochs
- insmod video_cirrus
- fi
- }
- if [ x$feature_default_font_path = xy ] ; then
- font=unicode
- else
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos5'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6
- else
- search --no-floppy --fs-uuid --set=root 6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6
- fi
- font="/usr/share/grub/unicode.pf2"
- fi
- if loadfont $font ; then
- set gfxmode=auto
- load_video
- insmod gfxterm
- set locale_dir=$prefix/locale
- set lang=en_US
- insmod gettext
- fi
- terminal_output gfxterm
- if [ "${recordfail}" = 1 ] ; then
- set timeout=10
- else
- if [ x$feature_timeout_style = xy ] ; then
- set timeout_style=menu
- set timeout=10
- # Fallback normal timeout code in case the timeout_style feature is
- # unavailable.
- else
- set timeout=10
- fi
- fi
- ### END /etc/grub.d/00_header ###
- ### BEGIN /etc/grub.d/05_debian_theme ###
- set menu_color_normal=white/black
- set menu_color_highlight=black/light-gray
- ### END /etc/grub.d/05_debian_theme ###
- ### BEGIN /etc/grub.d/06_mint_theme ###
- set menu_color_normal=white/black
- set menu_color_highlight=white/light-gray
- ### END /etc/grub.d/06_mint_theme ###
- ### BEGIN /etc/grub.d/10_linux ###
- function gfxmode {
- set gfxpayload="${1}"
- if [ "${1}" = "keep" ]; then
- set vt_handoff=vt.handoff=7
- else
- set vt_handoff=
- fi
- }
- if [ "${recordfail}" != 1 ]; then
- if [ -e ${prefix}/gfxblacklist.txt ]; then
- if hwmatch ${prefix}/gfxblacklist.txt 3; then
- if [ ${match} = 0 ]; then
- set linux_gfx_mode=keep
- else
- set linux_gfx_mode=text
- fi
- else
- set linux_gfx_mode=text
- fi
- else
- set linux_gfx_mode=keep
- fi
- else
- set linux_gfx_mode=text
- fi
- export linux_gfx_mode
- menuentry 'Linux Mint 17.2 Cinnamon 32-bit' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6' {
- recordfail
- load_video
- gfxmode $linux_gfx_mode
- insmod gzio
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos5'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6
- else
- search --no-floppy --fs-uuid --set=root 6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6
- fi
- linux /boot/vmlinuz-3.16.0-38-generic root=UUID=6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6 ro quiet splash $vt_handoff
- initrd /boot/initrd.img-3.16.0-38-generic
- }
- submenu 'Advanced options for Linux Mint 17.2 Cinnamon 32-bit' $menuentry_id_option 'gnulinux-advanced-6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6' {
- menuentry 'Linux Mint 17.2 Cinnamon 32-bit, with Linux 3.16.0-38-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-38-generic-advanced-6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6' {
- recordfail
- load_video
- gfxmode $linux_gfx_mode
- insmod gzio
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos5'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6
- else
- search --no-floppy --fs-uuid --set=root 6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6
- fi
- echo 'Loading Linux 3.16.0-38-generic ...'
- linux /boot/vmlinuz-3.16.0-38-generic root=UUID=6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6 ro quiet splash $vt_handoff
- echo 'Loading initial ramdisk ...'
- initrd /boot/initrd.img-3.16.0-38-generic
- }
- menuentry 'Linux Mint 17.2 Cinnamon 32-bit, with Linux 3.16.0-38-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-38-generic-recovery-6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6' {
- recordfail
- load_video
- insmod gzio
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos5'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6
- else
- search --no-floppy --fs-uuid --set=root 6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6
- fi
- echo 'Loading Linux 3.16.0-38-generic ...'
- linux /boot/vmlinuz-3.16.0-38-generic root=UUID=6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6 ro recovery nomodeset
- echo 'Loading initial ramdisk ...'
- initrd /boot/initrd.img-3.16.0-38-generic
- }
- }
- ### END /etc/grub.d/10_linux ###
- ### BEGIN /etc/grub.d/10_lupin ###
- ### END /etc/grub.d/10_lupin ###
- ### BEGIN /etc/grub.d/20_linux_xen ###
- ### END /etc/grub.d/20_linux_xen ###
- ### BEGIN /etc/grub.d/20_memtest86+ ###
- menuentry 'Memory test (memtest86+)' {
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos5'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6
- else
- search --no-floppy --fs-uuid --set=root 6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6
- fi
- knetbsd /boot/memtest86+.elf
- }
- menuentry 'Memory test (memtest86+, serial console 115200)' {
- insmod part_msdos
- insmod ext2
- set root='hd0,msdos5'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6
- else
- search --no-floppy --fs-uuid --set=root 6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6
- fi
- linux16 /boot/memtest86+.bin console=ttyS0,115200n8
- }
- ### END /etc/grub.d/20_memtest86+ ###
- ### BEGIN /etc/grub.d/30_os-prober ###
- menuentry 'Windows Recovery Environment (loader) (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-BA82C01E82BFDCD7' {
- insmod part_msdos
- insmod ntfs
- set root='hd0,msdos1'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 BA82C01E82BFDCD7
- else
- search --no-floppy --fs-uuid --set=root BA82C01E82BFDCD7
- fi
- parttool ${root} hidden-
- drivemap -s (hd0) ${root}
- chainloader +1
- }
- menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-6C58588C585856C4' {
- insmod part_msdos
- insmod ntfs
- set root='hd0,msdos2'
- if [ x$feature_platform_search_hint = xy ]; then
- search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 6C58588C585856C4
- else
- search --no-floppy --fs-uuid --set=root 6C58588C585856C4
- fi
- parttool ${root} hidden-
- drivemap -s (hd0) ${root}
- chainloader +1
- }
- set timeout_style=menu
- if [ "${timeout}" = 0 ]; then
- set timeout=10
- fi
- ### END /etc/grub.d/30_os-prober ###
- ### BEGIN /etc/grub.d/30_uefi-firmware ###
- ### END /etc/grub.d/30_uefi-firmware ###
- ### BEGIN /etc/grub.d/40_custom ###
- # This file provides an easy way to add custom menu entries. Simply type the
- # menu entries you want to add after this comment. Be careful not to change
- # the 'exec tail' line above.
- ### END /etc/grub.d/40_custom ###
- ### BEGIN /etc/grub.d/41_custom ###
- if [ -f ${config_directory}/custom.cfg ]; then
- source ${config_directory}/custom.cfg
- elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
- source $prefix/custom.cfg;
- fi
- ### END /etc/grub.d/41_custom ###
- --------------------------------------------------------------------------------
- =============================== sda5/etc/fstab: ================================
- --------------------------------------------------------------------------------
- # /etc/fstab: static file system information.
- #
- # Use 'blkid' to print the universally unique identifier for a
- # device; this may be used with UUID= as a more robust way to name devices
- # that works even if disks are added and removed. See fstab(5).
- #
- # <file system> <mount point> <type> <options> <dump> <pass>
- # / was on /dev/sda5 during installation
- UUID=6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6 / ext4 errors=remount-ro 0 1
- # swap was on /dev/sda6 during installation
- UUID=3345fc2b-5fb2-4e44-a9fa-922774d10186 none swap sw 0 0
- --------------------------------------------------------------------------------
- =========================== sdb1/boot/grub/grub.cfg: ===========================
- --------------------------------------------------------------------------------
- if loadfont /boot/grub/font.pf2 ; then
- set gfxmode=auto
- insmod efi_gop
- insmod efi_uga
- insmod gfxterm
- terminal_output gfxterm
- fi
- set menu_color_normal=white/black
- set menu_color_highlight=black/light-gray
- menuentry "Start Linux Mint 17.2 Cinnamon 32-bit" {
- set gfxpayload=keep
- linux /casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper iso-scan/filename=${iso_path} quiet splash --
- initrd /casper/initrd.lz
- }
- menuentry "Start Linux Mint 17.2 Cinnamon 32-bit (compatibility mode)" {
- linux /casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper xforcevesa iso-scan/filename=${iso_path} ramdisk_size=1048576 root=/dev/ram rw noapic noacpi nosplash irqpoll --
- initrd /casper/initrd.lz
- }
- menuentry "Check the integrity of the medium" {
- linux /casper/vmlinuz boot=casper integrity-check iso-scan/filename=${iso_path} quiet splash --
- initrd /casper/initrd.lz
- }
- --------------------------------------------------------------------------------
- ============================== sdb1/syslinux.cfg: ==============================
- --------------------------------------------------------------------------------
- default menu.c32
- prompt 0
- menu title UNetbootin
- timeout 100
- label unetbootindefault
- menu label Default
- kernel /ubnkern
- append initrd=/ubninit file=/cdrom/preseed/linuxmint.seed boot=casper quiet splash --
- label ubnentry0
- menu label Start Linux Mint
- kernel /casper/vmlinuz
- append initrd=/casper/initrd.lz file=/cdrom/preseed/linuxmint.seed boot=casper quiet splash --
- label ubnentry1
- menu label Start in compatibility mode
- kernel /casper/vmlinuz
- append initrd=/casper/initrd.lz file=/cdrom/preseed/linuxmint.seed boot=casper xforcevesa nomodeset b43.blacklist=yes ramdisk_size=1048576 root=/dev/ram rw noapic noacpi nosplash irqpoll --
- label ubnentry2
- menu label Start with PAE forced
- kernel /casper/vmlinuz
- append initrd=/casper/initrd.lz file=/cdrom/preseed/linuxmint.seed boot=casper quiet splash -- forcepae
- label ubnentry3
- menu label Integrity check
- kernel /casper/vmlinuz
- append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --
- label ubnentry4
- menu label Memory test
- kernel /casper/memtest
- append initrd=/ubninit
- label ubnentry5
- menu label Boot from local drive
- kernel /ubnkern
- append initrd=/ubninit hd0
- label ubnentry6
- menu label Start Linux Mint 17.2 Cinnamon 32-bit
- kernel /casper/vmlinuz
- append initrd=/casper/initrd.lz file=/cdrom/preseed/linuxmint.seed boot=casper iso-scan/filename=${iso_path} quiet splash --
- label ubnentry7
- menu label Start Linux Mint 17.2 Cinnamon 32-bit (compatibility mode)
- kernel /casper/vmlinuz
- append initrd=/casper/initrd.lz file=/cdrom/preseed/linuxmint.seed boot=casper xforcevesa iso-scan/filename=${iso_path} ramdisk_size=1048576 root=/dev/ram rw noapic noacpi nosplash irqpoll --
- label ubnentry8
- menu label Check the integrity of the medium
- kernel /casper/vmlinuz
- append initrd=/casper/initrd.lz boot=casper integrity-check iso-scan/filename=${iso_path} quiet splash --
- --------------------------------------------------------------------------------
- ============== sdb1: Version of COM32(R) files used by Syslinux: ===============
- menu.c32 : COM32R module (v4.xx)
- =============================== StdErr Messages: ===============================
- cat: write error: Broken pipe
- hexdump: u: bad byte count
- /usr/share/boot-sav/b-i-s.sh: line 1746: [: -eq: unary operator expected
- cat: write error: Broken pipe
- File descriptor 9 (/proc/5183/mounts) leaked on lvs invocation. Parent PID 16139: bash
- File descriptor 63 (pipe:[173839]) leaked on lvs invocation. Parent PID 16139: bash
- No volume groups found
- ADDITIONAL INFORMATION :
- =================== log of boot-repair 2016-02-08__22h13 ===================
- boot-repair version : 4ppa35
- boot-sav version : 4ppa35
- glade2script version : 3.2.2~ppa47~saucy
- boot-sav-extra version :
- boot-repair is executed in live-session (Linux Mint 17.2 Rafaela, rafaela, LinuxMint, i686)
- CPU op-mode(s): 32-bit, 64-bit
- initrd=/ubninit file=/cdrom/preseed/linuxmint.seed boot=casper quiet splash -- BOOT_IMAGE=/ubnkern
- ls: cannot access /home/usr/.config: No such file or directory
- Windows is hibernated, refused to mount.
- Failed to mount '/dev/sda2': Operation not permitted
- The NTFS partition is in an unsafe state. Please resume and shutdown
- Windows fully (no hibernation or fast restarting), or mount the volume
- read-only with the 'ro' mount option.
- mount -t ntfs-3g -o remove_hiberfile /dev/sda2 /mnt/boot-sav/sda2
- =================== os-prober:
- /dev/sda1:Windows Recovery Environment (loader):Windows:chain
- /dev/sda5:Linux Mint 17.2 Rafaela (17.2):LinuxMint:linux
- =================== blkid:
- /dev/loop0: TYPE="squashfs"
- /dev/sda1: LABEL="M-PM-^WM-PM-0M-QM-^@M-PM-5M-PM-7M-PM-5M-QM-^@M-PM-2M-PM-8M-QM-^@M-PM->M-PM-2M-PM-0M-PM-=M-PM-> M-QM-^AM-PM-8M-QM-^AM-QM-^BM-PM-5M-PM-<M-PM->M-PM-9" UUID="BA82C01E82BFDCD7" TYPE="ntfs"
- /dev/sda2: UUID="6C58588C585856C4" TYPE="ntfs"
- /dev/sda5: UUID="6b6d19bc-4d8b-4d1a-a0be-840ca2e74bf6" TYPE="ext4"
- /dev/sda6: UUID="3345fc2b-5fb2-4e44-a9fa-922774d10186" TYPE="swap"
- /dev/sdb1: LABEL="LINUX MINT" UUID="249A-A027" TYPE="vfat"
- 1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
- Windows not detected by os-prober on sda2.
- Warning: extended partition does not start at a cylinder boundary.
- DOS and Linux will interpret the contents differently.
- =================== sda5/etc/grub.d/ :
- drwxr-xr-x 2 root root 4096 Feb 8 21:33 grub.d
- total 92
- -rwxr-xr-x 1 root root 9424 May 13 2015 00_header
- -rwxr-xr-x 1 root root 6058 May 13 2015 05_debian_theme
- -rwxr-xr-x 1 root root 1180 Oct 25 2014 06_mint_theme
- -rwxr-xr-x 1 root root 11620 Feb 8 21:33 10_linux
- -rwxr-xr-x 1 root root 10634 Oct 1 2012 10_lupin
- -rwxr-xr-x 1 root root 10412 May 13 2015 20_linux_xen
- -rwxr-xr-x 1 root root 1992 Mar 12 2014 20_memtest86+
- -rwxr-xr-x 1 root root 11692 May 13 2015 30_os-prober
- -rwxr-xr-x 1 root root 1416 May 13 2015 30_uefi-firmware
- -rwxr-xr-x 1 root root 214 May 13 2015 40_custom
- -rwxr-xr-x 1 root root 216 May 13 2015 41_custom
- -rw-r--r-- 1 root root 483 May 13 2015 README
- =================== sda5/etc/default/grub :
- # If you change this file, run 'update-grub' afterwards to update
- # /boot/grub/grub.cfg.
- # For full documentation of the options in this file, see:
- # info -f grub -n 'Simple configuration'
- GRUB_DEFAULT=0
- #GRUB_HIDDEN_TIMEOUT=0
- GRUB_HIDDEN_TIMEOUT_QUIET=true
- GRUB_TIMEOUT=10
- GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
- GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
- GRUB_CMDLINE_LINUX=""
- # Uncomment to enable BadRAM filtering, modify to suit your needs
- # This works with Linux (no patch required) and with any kernel that obtains
- # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
- #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
- # Uncomment to disable graphical terminal (grub-pc only)
- #GRUB_TERMINAL=console
- # The resolution used on graphical terminal
- # note that you can use only modes which your graphic card supports via VBE
- # you can see them in real GRUB with the command `vbeinfo'
- #GRUB_GFXMODE=640x480
- # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
- #GRUB_DISABLE_LINUX_UUID=true
- # Uncomment to disable generation of recovery mode menu entries
- #GRUB_DISABLE_RECOVERY="true"
- # Uncomment to get a beep at grub start
- #GRUB_INIT_TUNE="480 440 1"
- =================== UEFI/Legacy mode:
- This live-session is not EFI-compatible.
- SecureBoot maybe enabled.
- =================== PARTITIONS & DISKS:
- sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
- sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
- sda5 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5.
- sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
- =================== parted -l:
- Model: ATA ST9320320AS (scsi)
- Disk /dev/sda: 320GB
- Sector size (logical/physical): 512B/512B
- Partition Table: msdos
- Number Start End Size Type File system Flags
- 1 1049kB 525MB 524MB primary ntfs boot
- 2 525MB 298GB 298GB primary ntfs
- 3 298GB 320GB 21.8GB extended
- 6 298GB 299GB 1053MB logical linux-swap(v1)
- 5 299GB 320GB 20.7GB logical ext4
- Model: SanDisk Cruzer Blade (scsi)
- Disk /dev/sdb: 4005MB
- Sector size (logical/physical): 512B/512B
- Partition Table: msdos
- Number Start End Size Type File system Flags
- 1 1049kB 4005MB 4003MB primary fat32 boot
- =================== parted -lm:
- BYT;
- /dev/sda:320GB:scsi:512:512:msdos:ATA ST9320320AS;
- 1:1049kB:525MB:524MB:ntfs::boot;
- 2:525MB:298GB:298GB:ntfs::;
- 3:298GB:320GB:21.8GB:::;
- 6:298GB:299GB:1053MB:linux-swap(v1)::;
- 5:299GB:320GB:20.7GB:ext4::;
- BYT;
- /dev/sdb:4005MB:scsi:512:512:msdos:SanDisk Cruzer Blade;
- 1:1049kB:4005MB:4003MB:fat32::boot;
- =================== lsblk:
- KNAME TYPE FSTYPE SIZE LABEL
- sda disk 298.1G
- sda1 part ntfs 500M Зарезервировано системой
- sda2 part ntfs 277.3G
- sda3 part 1K
- sda5 part ext4 19.3G
- sda6 part swap 1004M
- sdb disk 3.7G
- sdb1 part vfat 3.7G LINUX MINT
- sr0 rom 1024M
- loop0 loop squashfs 1.4G
- KNAME ROTA RO RM STATE MOUNTPOINT
- sda 1 0 0 running
- sda1 1 0 0 /mnt/boot-sav/sda1
- sda2 1 0 0 /mnt/boot-sav/sda2
- sda3 1 0 0
- sda5 1 0 0 /mnt/boot-sav/sda5
- sda6 1 0 0 [SWAP]
- sdb 1 0 1 running
- sdb1 1 0 1 /cdrom
- sr0 1 0 1 running
- loop0 1 1 0 /rofs
- =================== mount:
- /cow on / type overlayfs (rw)
- proc on /proc type proc (rw,noexec,nosuid,nodev)
- sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
- udev on /dev type devtmpfs (rw,mode=0755)
- devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
- tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
- /dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
- /dev/loop0 on /rofs type squashfs (ro,noatime)
- none on /sys/fs/cgroup type tmpfs (rw)
- none on /sys/fs/fuse/connections type fusectl (rw)
- none on /sys/kernel/debug type debugfs (rw)
- none on /sys/kernel/security type securityfs (rw)
- tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
- none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
- none on /run/shm type tmpfs (rw,nosuid,nodev)
- none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
- none on /sys/fs/pstore type pstore (rw)
- binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
- systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
- gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=mint)
- /dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
- /dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
- /dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw)
- =================== ls:
- /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda5 sda6 size slaves stat subsystem trace uevent
- /sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
- /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
- /dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse fw0 hidraw0 hpet input kmsg kvm log mapper mcelog media0 mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda5 sda6 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vfio vga_arbiter vhci vhost-net video0 zero
- ls /dev/mapper: control
- =================== hexdump -n512 -C /dev/sda1
- 00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
- 00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
- 00000020 00 00 00 00 80 00 80 00 ff 9f 0f 00 00 00 00 00 |................|
- 00000030 aa a6 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
- 00000040 f6 00 00 00 01 00 00 00 d7 dc bf 82 1e c0 82 ba |................|
- 00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
- 00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
- 00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
- 00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
- 00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
- 000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
- 000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
- 000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
- 000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
- 000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
- 000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
- 00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
- 00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
- 00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
- 00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
- 00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
- 00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
- 00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
- 00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
- 00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
- 00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
- 000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
- 000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
- 000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
- 000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
- 000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
- 000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
- 00000200
- =================== hexdump -n512 -C /dev/sda2
- 00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
- 00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 a8 0f 00 |........?.......|
- 00000020 00 00 00 00 80 00 80 00 f8 97 a9 22 00 00 00 00 |..........."....|
- 00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
- 00000040 f6 00 00 00 01 00 00 00 c4 56 58 58 8c 58 58 6c |.........VXX.XXl|
- 00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
- 00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
- 00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
- 00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
- 00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
- 000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
- 000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
- 000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
- 000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
- 000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
- 000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
- 00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
- 00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
- 00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
- 00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
- 00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
- 00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
- 00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
- 00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
- 00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
- 00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
- 000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
- 000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
- 000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
- 000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
- 000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
- 000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
- 00000200
- =================== df -Th:
- Filesystem Type Size Used Avail Use% Mounted on
- /cow overlayfs 2.0G 210M 1.8G 11% /
- udev devtmpfs 2.0G 12K 2.0G 1% /dev
- tmpfs tmpfs 406M 1.4M 404M 1% /run
- /dev/sdb1 vfat 3.8G 1.5G 2.3G 39% /cdrom
- /dev/loop0 squashfs 1.4G 1.4G 0 100% /rofs
- none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
- tmpfs tmpfs 2.0G 8.0K 2.0G 1% /tmp
- none tmpfs 5.0M 0 5.0M 0% /run/lock
- none tmpfs 2.0G 672K 2.0G 1% /run/shm
- none tmpfs 100M 16K 100M 1% /run/user
- /dev/sda1 fuseblk 500M 322M 179M 65% /mnt/boot-sav/sda1
- /dev/sda2 fuseblk 278G 44G 234G 16% /mnt/boot-sav/sda2
- /dev/sda5 ext4 19G 4.3G 14G 24% /mnt/boot-sav/sda5
- =================== fdisk -l:
- Disk /dev/sda: 320.1 GB, 320072933376 bytes
- 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
- Units = sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disk identifier: 0x000a91aa
- Device Boot Start End Blocks Id System
- /dev/sda1 * 2048 1026047 512000 7 HPFS/NTFS/exFAT
- /dev/sda2 1026048 582565887 290769920 7 HPFS/NTFS/exFAT
- /dev/sda3 582567934 625141706 21286886+ 5 Extended
- /dev/sda5 584624128 625141706 20258789+ 83 Linux
- /dev/sda6 582567936 584624127 1028096 82 Linux swap / Solaris
- Partition table entries are not in disk order
- Disk /dev/sdb: 4004 MB, 4004511744 bytes
- 218 heads, 51 sectors/track, 703 cylinders, total 7821312 sectors
- Units = sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disk identifier: 0xcad4ebea
- Device Boot Start End Blocks Id System
- /dev/sdb1 * 2048 7821311 3909632 b W95 FAT32
- =================== Recommended repair
- The default repair of the Boot-Repair utility will reinstall the grub2 of sda5 into the MBR of sda.
- Additional repair will be performed: unhide-bootmenu-10s fix-windows-boot
- Quantity of real Windows: 1
- WinSE in sda2
- Copied Win boot files from sda1 to sda2
- *******lspci -nnk | grep -iA3 vga
- 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G86M [GeForce 8400M GS] [10de:0427] (rev a1)
- Subsystem: Dell Device [1028:0273]
- Kernel driver in use: nouveau
- 06:00.0 Network controller [0280]: Broadcom Corporation BCM4321 802.11a/b/g/n [14e4:4328] (rev 03)
- *******
- grub-install --version
- grub-install.real (GRUB) 2.02~beta2-9ubuntu1.2,grub-install.
- Reinstall the GRUB of sda5 into the MBR of sda
- Installing for i386-pc platform.
- grub-install.real: warning: Sector 32 is already in use by the program `FlexNet'; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track.
- Installation finished. No error reported.
- grub-install /dev/sda: exit code of grub-install /dev/sda:0
- FlexNet detected. Please backup your data before this operation. Do you want to continue? yes
- dd if=/dev/sda of=/var/log/boot-sav/log/2016-02-08__22h13boot-repair01/sda/before_wiping.img bs=512 count=2047 seek=1
- 2047+0 records in
- 2047+0 records out
- WIPE sda : 2047 sectors * 512 bytes
- dd if=/dev/zero of=/dev/sda bs=512 count=2047 seek=1
- 2047+0 records in
- 2047+0 records out
- Installing for i386-pc platform.
- Installation finished. No error reported.
- grub-install /dev/sda: exit code of grub-install /dev/sda:0
- chroot /mnt/boot-sav/sda5 update-grub
- Generating grub configuration file ...
- Found linux image: /boot/vmlinuz-3.16.0-38-generic
- Found initrd image: /boot/initrd.img-3.16.0-38-generic
- Found memtest86+ image: /boot/memtest86+.elf
- Found memtest86+ image: /boot/memtest86+.bin
- File descriptor 9 (/proc/5183/mounts) leaked on lvs invocation. Parent PID 13019: /bin/sh
- File descriptor 63 (pipe:[173839]) leaked on lvs invocation. Parent PID 13019: /bin/sh
- No volume groups found
- Found Windows Recovery Environment (loader) on /dev/sda1
- Found Windows Recovery Environment (loader) on /dev/sda2
- Unhide GRUB boot menu in sda5/boot/grub/grub.cfg
- Boot successfully repaired.
- You can now reboot your computer.
- pastebinit packages needed
- debconf: unable to initialize frontend: Dialog
- debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.)
- debconf: falling back to frontend: Readline
- debconf: unable to initialize frontend: Readline
- debconf: (This frontend requires a controlling tty.)
- debconf: falling back to frontend: Teletype
- dpkg-preconfigure: unable to re-open stdin: