<6>[ 0.000000] Booting Linux on physical CPU 0

<5>[ 0.000000] Linux version 3.4.39 (fjj@sunchip-To-be-filled-by-O-E-M) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #253 Thu Jul 14 15:32:42 CST 2016

<7>[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d

<7>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

<7>[ 0.000000] Machine: sun8i

<4>[ 0.000000] Ignoring unrecognised tag 0x00000000

<6>[ 0.000000] Initialized persistent memory from 41d20800-41d307ff

<7>[ 0.000000] Memory policy: ECC disabled, Data cache writeback

<7>[ 0.000000] On node 0 totalpages: 65536

<7>[ 0.000000] free_area_init_node: node 0, pgdat c04f2f5c, node_mem_map c058f000

<7>[ 0.000000] Normal zone: 512 pages used for memmap

<7>[ 0.000000] Normal zone: 0 pages reserved

<7>[ 0.000000] Normal zone: 65024 pages, LIFO batch:15

<7>[ 0.000000] script_init enter!

<7>[ 0.000000] script_init exit!

<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768

<7>[ 0.000000] pcpu-alloc: [0] 0

<7>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024

<5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nor1 init=/init loglevel=8 partitions=boot@spinorp0:system@spinorp1:cfg@spinorp2:boot_logo@spinorp3:shutdown_logo@spinorp4:env@spinorp5:private@spinorp6:UDISK@spinorp7 mac_addr= uid=8882f574-3e53-45 kmemleak=on boot_type=3 fb_base=0x41b00000 config_size=49152

<6>[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)

<6>[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

<6>[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

<6>[ 0.000000] Memory: 256MB = 256MB total

<5>[ 0.000000] Memory: 151360k/151360k available, 110784k reserved, 0K highmem

<5>[ 0.000000] Virtual kernel memory layout:

<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)

<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)

<5>[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)

<5>[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)

<5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)

<5>[ 0.000000] .text : 0xc0008000 - 0xc0488000 (4608 kB)

<5>[ 0.000000] .init : 0xc0488000 - 0xc04ad000 ( 148 kB)

<5>[ 0.000000] .data : 0xc04ae000 - 0xc04f3680 ( 278 kB)

<5>[ 0.000000] .bss : 0xc04f36a4 - 0xc058e8a0 ( 621 kB)

<6>[ 0.000000] NR_IRQS:544

<7>[ 0.000000] 524 ahb1 set parent pll_periph0d2

<6>[ 0.000000] Architected local timer running at 24.00MHz.

<6>[ 0.000000] Switching to timer-based delay loop

<6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms

<6>[ 0.000000] Console: colour dummy device 80x30

<6>[ 0.000130] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)

<6>[ 0.000151] pid_max: default: 32768 minimum: 301

<6>[ 0.000270] Mount-cache hash table entries: 512

<6>[ 0.000699] CPU: Testing write buffer coherency: ok

<6>[ 0.000898] Setting up static identity map for 0x40364c78 - 0x40364cac

<6>[ 0.001414] devtmpfs: initialized

<6>[ 0.002910] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5

<6>[ 0.003033] pinctrl core: initialized pinctrl subsystem

<6>[ 0.003424] NET: Registered protocol family 16

<6>[ 0.003728] DMA: preallocated 128 KiB pool for atomic coherent allocations

<6>[ 0.003770] script_sysfs_init success

<7>[ 0.003797] sunxi_dump_init success

<6>[ 0.004447] gpiochip_add: registered GPIOs 0 to 223 on device: sunxi-pinctrl

<6>[ 0.005419] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver

<6>[ 0.005686] gpiochip_add: registered GPIOs 1024 to 1031 on device: axp-pinctrl

<6>[ 0.006396] persistent_ram: uncorrectable error in header

<6>[ 0.006410] persistent_ram: no valid data in buffer (sig = 0x27410200)

<6>[ 0.011463] console [ram-1] enabled

<7>[ 0.011780] [sunxi-module]: [sunxi-module.0] probe success

<7>[ 0.012007] axp driver uning configuration failed(838)

<7>[ 0.012081] axp driver uning configuration failed(844)

<7>[ 0.012212] axp driver uning configuration failed(850)

<7>[ 0.012284] axp driver uning configuration failed(857)

<6>[ 0.012528] script config pll_isp to 360 Mhz

<5>[ 0.012620] Not Found clk pll_video in script

<6>[ 0.012697] script config pll_ve to 480 Mhz

<5>[ 0.012838] Not Found clk pll_periph0 in script

<5>[ 0.012910] Not Found clk pll_de in script

<7>[ 0.013037] sunxi_default_clk_init

<7>[ 0.013108] try to set pll6ahb1 to 200000000

<7>[ 0.013182] Error not get clk pll6ahb1

<7>[ 0.013314] Error not get clk pll6ahb1try to set ahb1 to 200000000

<7>[ 0.013460] try to set apb1 to 100000000

<7>[ 0.013821] ===fe3o4==== sunxi_root_procfs_attach ret:0

<6>[ 0.016767] bio: create slab <bio-0> at 0

<6>[ 0.017047] pwm module init!

<4>[ 0.017419] get pwm0 gpio list fail!

<5>[ 0.018677] SCSI subsystem initialized

<6>[ 0.018949] usbcore: registered new interface driver usbfs

<6>[ 0.019143] usbcore: registered new interface driver hub

<6>[ 0.019324] usbcore: registered new device driver usb

<4>[ 0.019559] twi_chan_cfg()341 - [twi0] has no twi_speed!

<4>[ 0.019634] twi_chan_cfg()352 - [twi0] has no twi_regulator.

<4>[ 0.019768] twi_chan_cfg()341 - [twi1] has no twi_speed!

<4>[ 0.019842] twi_chan_cfg()352 - [twi1] has no twi_regulator.

<6>[ 0.020463] axp20_board 0-0034: AXP (CHIP ID: 0x41) detected

<6>[ 0.020524] Linux video capture interface: v2.00

<3>[ 0.020876] gpiochip_add: gpios 1024..1028 (axp_pin) failed to register

<7>[ 0.020876] axp pinctrl used,skip

<6>[ 0.020876] Advanced Linux Sound Architecture Driver Version 1.0.25.

<6>[ 0.021355] cfg80211: Calling CRDA to update world regulatory domain

<6>[ 0.021734] Switching to clocksource arch_sys_counter

<6>[ 0.025303] NET: Registered protocol family 2

<6>[ 0.025605] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

<6>[ 0.026162] TCP established hash table entries: 8192 (order: 4, 65536 bytes)

<6>[ 0.026419] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)

<6>[ 0.026553] TCP: Hash tables configured (established 8192 bind 8192)

<6>[ 0.026685] TCP: reno registered

<6>[ 0.026760] UDP hash table entries: 256 (order: 0, 4096 bytes)

<6>[ 0.026845] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

<6>[ 0.027224] NET: Registered protocol family 1

<6>[ 0.027464] Unpacking initramfs...

<6>[ 0.041336] Freeing initrd memory: 224K

<6>[ 0.041611] sunxi_reg_init enter

<6>[ 0.043044] squashfs: version 4.0 (2009/01/31) Phillip Lougher

<6>[ 0.043218] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.

<6>[ 0.043451] msgmni has been set to 296

<6>[ 0.044311] io scheduler noop registered

<6>[ 0.044395] io scheduler deadline registered

<6>[ 0.044526] io scheduler cfq registered (default)

<6>[ 0.044881] [DISP]disp_module_init

<6>[ 0.045233] cmdline,disp=

<7>[ 0.045755] disp_init_rotation_sw

<7>[ 0.045904] @@@rot-degree=1, scn_size[128,64]

<7>[ 0.046014] disp_rot_sw_set_manager,1246

<7>[ 0.046883] rot_degree =1, w=128, h=64

<4>[ 0.050358] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL

<6>[ 0.050929] [DISP]disp_module_init finish

<4>[ 0.051185] sw_uart_get_devinfo()1503 - uart1 has no uart_regulator.

<6>[ 0.051565] uart1: ttyS0 at MMIO 0x1c28400 (irq = 33) is a SUNXI

<4>[ 0.051704] sw_uart_pm()890 - uart1 clk is already enable

<4>[ 0.051786] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n

<6>[ 0.244168] console [ttyS0] enabled

<4>[ 0.801952] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator.

<6>[ 0.809525] spi spi0: master is unqueued, this is deprecated

<3>[ 0.816059] m25p_probe()966 - Use the Dual Mode Read.

<7>[ 0.821809] NorFlash ID: 0xc84018 - 0xc840

<4>[ 0.826480] m25p80 spi0.0: found gd25q128, expected at25df641

<6>[ 0.832934] m25p80 spi0.0: gd25q128 (16384 Kbytes)

<7>[ 0.839815] @@@[debug_jaosn]: Invalid partitions count: 4 9

<5>[ 0.846453] Creating 8 MTD partitions on "spi0.0":

<5>[ 0.851927] 0x000000000000-0x000000040000 : "uboot"

<5>[ 0.858161] 0x000000040000-0x000000300000 : "boot"

<5>[ 0.864215] 0x000000300000-0x000000930000 : "system"

<5>[ 0.870456] 0x000000930000-0x000000b30000 : "cfg"

<5>[ 0.876293] 0x000000b30000-0x000000b50000 : "boot_logo"

<5>[ 0.882859] 0x000000b50000-0x000000b70000 : "shutdown_logo"

<5>[ 0.889691] 0x000000b70000-0x000000b80000 : "env"

<5>[ 0.895681] 0x000000b80000-0x000000b90000 : "private"

<6>[ 0.902032] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

<6>[ 0.929478] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver

<6>[ 0.938461] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1

<6>[ 0.947088] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000

<3>[ 0.953816] [fangjianjun]:this is for lcd_panel_st7735s_init+++++++++++++

<6>[ 0.980019] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00

<6>[ 0.987209] hub 1-0:1.0: USB hub found

<6>[ 0.991479] hub 1-0:1.0: 1 port detected

<6>[ 0.996159] sunxi-ehci sunxi-ehci.1: remove, state 1

<6>[ 1.001827] usb usb1: USB disconnect, device number 1

<6>[ 1.302088] sunxi-ehci sunxi-ehci.1: USB bus 1 deregistered

<6>[ 1.318482] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

<6>[ 1.345490] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver

<6>[ 1.354138] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 1

<6>[ 1.362702] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400

<6>[ 1.424494] hub 1-0:1.0: USB hub found

<6>[ 1.428736] hub 1-0:1.0: 1 port detected

<6>[ 1.433457] sunxi-ohci sunxi-ohci.1: remove, state 1

<6>[ 1.439042] usb usb1: USB disconnect, device number 1

<6>[ 1.445144] sunxi-ohci sunxi-ohci.1: USB bus 1 deregistered

<6>[ 1.461498] Initializing USB Mass Storage driver...

<6>[ 1.467101] usbcore: registered new interface driver usb-storage

<6>[ 1.473843] USB Mass Storage support registered.

<6>[ 1.479274] file system registered

<6>[ 1.483986] android_usb gadget: Mass Storage Function, version: 2009/09/11

<6>[ 1.491722] android_usb gadget: Number of LUNs=1

<6>[ 1.496966] lun0: LUN: removable file: (no medium)

<6>[ 1.502704] android_usb gadget: android_usb ready

<3>[ 1.508142] sunxikbd_script_init: key para not found, used default para.

<6>[ 1.516916] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0

<7>[ 1.524539] sunxi cedar version 0.1

<7>[ 1.528606] [cedar]: install start!!!

<7>[ 1.532981] [cedar]: install end!!!

<7>[ 1.544843] pmu_pekoff_time = 6000

<7>[ 1.548686] pmu_pekoff_en = 1

<7>[ 1.552060] pmu_peklong_time = 1500

<7>[ 1.556047] pmu_pekon_time = 1000

<7>[ 1.559781] pmu_pwrok_time = 64

<7>[ 1.563329] pmu_pwrnoe_time = 2000

<7>[ 1.567219] pmu_hot_shutdown = 1

<7>[ 1.571707] POWER20_PEK_SET:2234-->0x9d

<7>[ 1.576441] POWER20_PEK_SET:2245-->0x9d

<7>[ 1.581185] POWER20_PEK_SET:2254-->0x9d

<7>[ 1.585977] POWER20_PEK_SET:2265-->0x9d

<7>[ 1.590714] POWER20_PEK_SET:2277-->0x9d

<7>[ 1.595442] POWER20_HOTOVER_CTL:2286-->0x25

<7>[ 1.614713] step1 : gsensor_fetch_sysconfig_para

<7>[ 1.619913] step2 : gsensor_fetch_sysconfig_para

<7>[ 1.625186] step3 : gsensor_fetch_sysconfig_para

<7>[ 1.630378] step4 : mir3da_init

<4>[ 1.633962] i2c-core: driver [da380] using legacy suspend method

<4>[ 1.640759] i2c-core: driver [da380] using legacy resume method

<7>[ 1.647396] richard mir3da_detect: mir3da_detect:bus[0] addr[0x27]

<7>[ 1.654507] richard mir3da_detect: mir3da_detect:bus[1] addr[0x27]

<4>[ 1.666782] sunxi_i2c_do_xfer()997 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x27)

<4>[ 1.681203] sunxi_i2c_do_xfer()997 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x27)

<4>[ 1.695674] sunxi_i2c_do_xfer()997 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x27)

<3>[ 1.704975] [MIR3DA] Can't find Mir3da gsensor!!

<7>[ 1.710169] sw200x: init

<7>[ 1.713037] sw200x_init i2c twi is 1

<7>[ 1.718287] sw200x_detect enter

<7>[ 1.721945] sw200x_detect enter

<7>[ 1.725670] sw200x probe i2c address is 60

<7>[ 1.730791] ---sw200x_Main----chipid--------=: 0x22,

<7>[ 1.736490] verify sunchip chipid success! t1_success---=: 1

<7>[ 1.743345] ---sw200x_Main----chipid--------=: 0x44,

<7>[ 1.749017] verify sunchip chipid success! t1_success---=: 2

<7>[ 1.755848] ---sw200x_Main----chipid--------=: 0x66,

<7>[ 1.761526] verify sunchip chipid success! t1_success---=: 3

<7>[ 1.768309] ---sw200x_Main----chipid--------=: 0x88,

<7>[ 1.774047] verify sunchip chipid success! t1_success---=: 4

<7>[ 1.780818] ---sw200x_Main----chipid--------=: 0xaa,

<7>[ 1.786545] verify sunchip chipid success! t1_success---=: 5

<7>[ 1.793315] ---sw200x_Main----chipid--------=: 0xcc,

<7>[ 1.799042] verify sunchip chipid success! t1_success---=: 6

<7>[ 1.805814] ---sw200x_Main----chipid--------=: 0xee,

<7>[ 1.811549] verify sunchip chipid success! t1_success---=: 7

<7>[ 1.831557] verify success!

<7>[ 1.834779] sw200x_probe -----Read sw200x ID value is 0

<6>[ 1.840760] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0

<6>[ 1.848001] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf

<6>[ 1.859225] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)

<6>[ 1.866897] wdt_enable, write reg 0xf1c20cb8 val 0x00000000

<6>[ 1.873221] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec

<3>[ 1.882523] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq

<7>[ 1.892033] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.114 2015-6-2 10:21) Compiled in May 23 2016 at 15:43:39

<7>[ 1.903496] [mmc]: get mmc0's sdc_power failed

<7>[ 1.908502] [mmc]: get mmc1's sdc_power failed

<7>[ 1.913574] [mmc]: MMC host used card: 0x3, boot card: 0x0, io_card 2

<7>[ 1.921480] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 1.934624] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<3>[ 1.947420] no led_4, ignore it!

<3>[ 1.951101] no led_5, ignore it!

<3>[ 1.954747] no led_6, ignore it!

<3>[ 1.958449] no led_7, ignore it!

<7>[ 1.962271] Registered led device: led_0

<7>[ 1.966760] Registered led device: led_1

<7>[ 1.971314] Registered led device: led_2

<7>[ 1.975797] Registered led device: led_3

<6>[ 1.980417] usbcore: registered new interface driver usbhid

<6>[ 1.986734] usbhid: USB HID core driver

<6>[ 1.991497] ashmem: initialized

<6>[ 1.995151] logger: created 256K log 'log_main'

<6>[ 2.000417] logger: created 32K log 'log_events'

<6>[ 2.005677] logger: created 32K log 'log_radio'

<6>[ 2.011045] logger: created 32K log 'log_system'

<3>[ 2.017343] [audiocodec] mic1_mic3_used type err!

<6>[ 2.023432] asoc: sndcodec <-> sunxi-codec mapping ok

<6>[ 2.032755] asoc: snddaudio <-> pri_dai mapping ok

<6>[ 2.039129] IPv4 over IPv4 tunneling driver

<6>[ 2.044531] TCP: cubic registered

<6>[ 2.048297] Initializing XFRM netlink socket

<6>[ 2.053273] NET: Registered protocol family 10

<6>[ 2.059112] IPv6 over IPv4 tunneling driver

<6>[ 2.064436] NET: Registered protocol family 17

<6>[ 2.069720] ThumbEE CPU extension supported.

<5>[ 2.074637] Registering SWP/SWPB emulation handler

<6>[ 2.080405] [HDMI]ep952_module_init begin

<7>[ 2.085004] [ep952] hdmi_power: axp20_ldo4

<6>[ 2.089674] [DISP_I2C] hdmi_i2c_detect, get right i2c adapter, id=1

<6>[ 2.096904] [DISP_I2C] hdmi_i2c_probe

<7>[ 2.101350] ep952_thread:235

<6>[ 2.106508] sunxi-rtc sunxi-rtc: setting system clock to 1970-01-01 00:00:03 UTC (3)

<7>[ 2.116387] [rf_pm]: Did not config module_power1 in sys_config

<7>[ 2.123101] [rf_pm]: Did not config module_power2 in sys_config

<7>[ 2.129797] [rf_pm]: Did not config module_power3 in sys_config

<7>[ 2.136446] [rf_pm]: mod has no chip_en gpio

<7>[ 2.141343] [rf_pm]: regulator on.

<7>[ 2.145220] [rf_pm]: Get ap 32k clk out failed!

<7>[ 2.150600] [wifi_pm]: wifi gpio init is OK !!

<6>[ 2.155737] ALSA device list:

<6>[ 2.159090] #0: audiocodec

<6>[ 2.162379] #1: snddaudio

<6>[ 2.165967] Freeing init memory: 148K

<3>[ 2.171694] init: skipping insecure file '/default.prop'

<3>[ 2.177865] init: skipping insecure file '/init.rc'

<3>[ 2.183825] init: /init.rc: 144: invalid option 'root'

<3>[ 2.189721] init: skipping insecure file '/init.sun8i.rc'

<3>[ 2.196065] init: /init.sun8i.rc: 72: invalid option 'root'

<3>[ 2.202451] init: skipping insecure file 'init.sun8i.usb.rc'

<6>[ 2.209399] init: command 'loglevel' r=0

<3>[ 2.215060] init: skipping insecure file '/ueventd.rc'

<6>[ 2.221049] init: command 'export' r=0

<6>[ 2.225293] init: command 'export' r=0

<6>[ 2.229526] init: command 'export' r=0

<3>[ 2.233989] init: skipping insecure file '/ueventd.sun8i.rc'

<6>[ 2.244940] init: command 'export' r=0

<6>[ 2.249190] init: command 'export' r=0

<6>[ 2.260148] init: command 'export' r=0

<6>[ 2.264419] init: command 'export' r=0

<6>[ 2.268699] init: command 'symlink' r=0

<6>[ 2.285450] init: command 'symlink' r=0

<6>[ 2.294468] init: command 'symlink' r=0

<6>[ 2.303454] init: command 'mkdir' r=0

<6>[ 2.307697] init: command 'mkdir' r=0

<6>[ 2.315757] init: command 'mkdir' r=0

<6>[ 2.319951] init: command 'mkdir' r=-2

<6>[ 2.324318] init: processing action 0xbc1d18 (init)

<6>[ 2.329816] init: command 'export' r=0

<6>[ 2.334064] init: command 'export' r=0

<6>[ 2.338359] init: command 'export' r=0

<6>[ 2.342613] init: command 'export' r=0

<6>[ 2.346845] init: command 'export' r=0

<6>[ 2.351142] init: processing action 0xbc01b8 (early-fs)

<6>[ 2.357061] init: command 'mkdir' r=0

<6>[ 2.361261] init: command 'mkdir' r=0

<6>[ 2.365480] init: command 'mkdir' r=0

<6>[ 2.369618] init: processing action 0xbc3070 (console_init)

<6>[ 2.376184] init: command 'console_init' r=0

<6>[ 2.381057] init: processing action 0xbc0538 (fs)

<6>[ 2.386384] init: command 'wait' r=0

<6>[ 2.390969] init: command 'setupfs' r=1

<6>[ 2.395369] init: out of loopback devices source = /dev/block/mtdblock2

<6>[ 2.402953] init: out of loopback devices target = /system

<6>[ 2.409117] init: out of loopback devices system = squashfs

<6>[ 2.415445] init: out of loopback devices options = (null)

<6>[ 2.423678] init: command 'mount' r=0

<6>[ 2.427898] init: command 'wait' r=0

<6>[ 2.432039] init: out of loopback devices source = /dev/block/mtdblock3

<6>[ 2.439450] init: out of loopback devices target = /data

<6>[ 2.445508] init: out of loopback devices system = jffs2

<6>[ 2.451485] init: out of loopback devices options = (null)

<6>[ 2.473792] init: command 'mount' r=0

<6>[ 2.477968] init: out of loopback devices source = none

<6>[ 2.483921] init: out of loopback devices target = /sys/kernel/debug/

<6>[ 2.491238] init: out of loopback devices system = debugfs

<6>[ 2.497454] init: out of loopback devices options = (null)

<6>[ 2.503726] init: command 'mount' r=0

<6>[ 2.507912] init: processing action 0xbc0640 (post-fs)

<6>[ 2.513777] init: out of loopback devices source = rootfs

<6>[ 2.519883] init: out of loopback devices target = /

<6>[ 2.525879] init: out of loopback devices system = rootfs

<6>[ 2.532118] init: out of loopback devices options = (null)

<6>[ 2.538522] init: command 'mount' r=0

<6>[ 2.542746] init: processing action 0xbc06a0 (post-fs-data)

<6>[ 2.549264] init: command 'chown' r=0

<6>[ 2.557181] init: command 'chmod' r=0

<6>[ 2.561987] init: command 'chmod' r=-2

<6>[ 2.570072] init: command 'mkdir' r=0

<6>[ 2.574291] init: command 'restorecon' r=0

<6>[ 2.583088] init: command 'mkdir' r=0

<6>[ 2.591173] init: command 'mkdir' r=0

<6>[ 2.600418] init: command 'mkdir' r=0

<6>[ 2.608245] init: command 'mkdir' r=0

<6>[ 2.612607] init: command 'chown' r=0

<6>[ 2.619885] init: command 'mkdir' r=0

<6>[ 2.624493] init: processing action 0xbc1a68 (post-fs-data)

<3>[ 2.633475] init: skipping insecure file '/system/vendor/modules/videobuf-core.ko'

<6>[ 2.681469] init: command 'insmod' r=0

<3>[ 2.686560] init: skipping insecure file '/system/vendor/modules/videobuf-dma-contig.ko'

<6>[ 2.724734] init: command 'insmod' r=0

<3>[ 2.729166] init: skipping insecure file '/system/vendor/modules/cci.ko'

<5>[ 2.764674] [VFE]cci probe start cci_sel = 0!

<5>[ 2.769698] [VFE]cci probe end cci_sel = 0!

<5>[ 2.774559] [VFE]cci_init end

<6>[ 2.778019] init: command 'insmod' r=0

<3>[ 2.782474] init: skipping insecure file '/system/vendor/modules/vfe_os.ko'

<6>[ 2.791469] init: command 'insmod' r=0

<3>[ 2.795844] init: skipping insecure file '/system/vendor/modules/vfe_subdev.ko'

<6>[ 2.853642] init: command 'insmod' r=0

<3>[ 2.858019] init: skipping insecure file '/system/vendor/modules/ov4689_sdv.ko'

<6>[ 2.925294] init: command 'insmod' r=0

<3>[ 2.929660] init: skipping insecure file '/system/vendor/modules/imx179s.ko'

<6>[ 2.992461] init: command 'insmod' r=0

<3>[ 2.996899] init: skipping insecure file '/system/vendor/modules/vfe_v4l2.ko'

<5>[ 3.141225] [VFE]Welcome to Video Front End driver

<5>[ 3.146994] [VFE]pdev->id = 0

<5>[ 3.150466] [VFE]dev->mipi_sel = 0

<5>[ 3.154329] [VFE]dev->vip_sel = 0

<5>[ 3.158064] [VFE]dev->isp_sel = 0

<4>[ 3.168063] [VFE_WARN]vfe vpu clock is null

<7>[ 3.179234] [ISP] isp platform_id = 6!

<5>[ 3.183645] [VFE]vfe_init end

<6>[ 3.187476] init: command 'insmod' r=0

<5>[ 3.191768] [VFE]probe_work_handle start!

<5>[ 3.196287] [VFE]..........................vfe clk open!.......................

<6>[ 3.204571] init: processing action 0xbc30b8 (property_service_init)

<5>[ 3.212779] [VFE]v4l2 subdev register input_num = 0

<4>[ 3.219085] axp20_ldo3: Failed to create debugfs directory

<5>[ 3.230310] [VFE]vfe sensor detect start! input_num = 0

<7>[ 3.236242] [VFE_WARN]NOT found this item: imx179s, you can add this sensor in the sensor_list_t!

<5>[ 3.246323] [VFE]Sub device register "imx179s" i2c_addr = 0x20 start!

<5>[ 3.253547] [VFE]v4l2_device_register_subdev return 0

<5>[ 3.259274] [VFE]registered sensor subdev is OK!

<5>[ 3.264467] [VFE]Check sensor!

<5>[ 3.267916] [VFE]Sub device register "imx179s" is OK!

<3>[ 3.274469] init: skipping insecure file '/system/build.prop'

<5>[ 3.283772] [VFE]Check open /system/etc/hawkview/imx179s/isp_test_param.ini failed!

<5>[ 3.283784] Match isp cfg start!

<7>[ 3.296198] [VFE_WARN]NOT found this item: imx179s, you can add this ISP Config in the isp_cfg_array!

<5>[ 3.306663] [VFE]read ini start

<5>[ 3.310291] [VFE]Fetch ini file form "/system/etc/hawkview/imx179s/isp_test_param.ini"

<7>[ 3.321123] [vfe_warn]open file failed!

<4>[ 3.325876] [VFE_WARN]read ini info fail

<5>[ 3.330967] [VFE]V4L2 device registered as video0

<5>[ 3.336336] [VFE]..........................vfe clk close!.......................

<5>[ 3.344807] [VFE]probe_work_handle end!

<6>[ 3.386428] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'

<6>[ 3.396840] init: command 'property_service_init' r=0

<6>[ 3.402579] init: processing action 0xbc3100 (signal_init)

<6>[ 3.408846] init: command 'signal_init' r=0

<6>[ 3.413586] init: processing action 0xbc3148 (check_startup)

<6>[ 3.420061] init: command 'check_startup' r=0

<6>[ 3.424977] init: processing action 0xbc08b0 (boot)

<6>[ 3.430965] init: command 'ifup' r=0

<6>[ 3.435145] init: command 'hostname' r=0

<6>[ 3.439618] init: command 'domainname' r=0

<6>[ 3.444387] init: command 'setrlimit' r=0

<6>[ 3.448982] init: command 'chown' r=0

<5>[ 3.453245] init: starting 'servicemanager'

<5>[ 3.458421] init: starting 'vold'

<5>[ 3.467783] init: starting 'startupSound'

<6>[ 3.477429] init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'

<6>[ 3.492269] init: command 'class_start' r=0

<5>[ 3.507149] init: starting 'debuggerd'

<5>[ 3.521661] init: starting 'media'

<5>[ 3.539403] init: starting 'sdv'

<6>[ 3.559167] init: command 'class_start' r=0

<6>[ 3.569007] init: processing action 0xbc1b98 (boot)

<6>[ 3.575405] init: command 'setprop' r=0

<6>[ 3.580684] init: command 'setprop' r=0

<6>[ 3.585812] init: command 'setprop' r=0

<6>[ 3.590304] init: processing action 0xbc3190 (queue_property_triggers)

<6>[ 3.598988] init: command 'queue_property_triggers' r=0

<6>[ 3.605039] init: processing action 0xbc0b90 (property:ro.debuggable=1)

<5>[ 3.614042] init: starting 'console'

<6>[ 3.621711] init: command 'start' r=0

<6>[ 3.632417] init: processing action 0xbc2aa8 (property:sys.usb.config=mass_storage,adb)

<3>[ 3.642938] android_usb: already disabled

<6>[ 3.648076] init: command 'write' r=0

<6>[ 3.653915] init: command 'write' r=0

<6>[ 3.660118] init: command 'write' r=0

<6>[ 3.665801] init: command 'write' r=0

<6>[ 3.671524] init: command 'write' r=0

<6>[ 3.676470] init: command 'setprop' r=0

<7>[ 4.624864] ****************Set_Rset_Cap=37***********

<3>[ 5.787632] ¡ï¡¤newcdr¡¤¡ï: main entry

<3>[ 5.793815] ¡ï¡¤newcdr¡¤¡ï: [Firmware Version: fjj@fuxin360imx179s_sdv 2016-07-18 15:19:01]

<3>[ 5.812209] ¡ï¡¤newcdr¡¤¡ï: ===power capacity: 37%/100%===

<4>[ 6.498407] [DISP] check_dirty_rect,line:1067:dirty[251,3,1,1],crop[64,64,128,64]

<4>[ 6.509158] [DISP] check_dirty_rect,line:1067:dirty[200,3,1,1],crop[64,64,128,64]

<4>[ 6.518252] [DISP] check_dirty_rect,line:1067:dirty[251,3,1,1],crop[64,64,128,64]

<4>[ 6.526917] [DISP] check_dirty_rect,line:1067:dirty[223,3,1,1],crop[64,64,128,64]

<4>[ 6.541197] [DISP] check_dirty_rect,line:1067:dirty[190,3,1,1],crop[64,64,128,64]

<4>[ 6.558377] [DISP] check_dirty_rect,line:1067:dirty[260,48,40,20],crop[64,64,128,64]

<6>[ 6.669394] [DISP] ready enter pm_runtime_get_sync, device0

<5>[ 6.954680] [VFE]vfe_open

<5>[ 6.957784] [VFE]..........................vfe clk open!.......................

<5>[ 6.966483] [VFE]vfe_open ok

<7>[ 6.969955] [VFE_WARN]NOT found this item: imx179s, you can add this sensor in the sensor_list_t!

<4>[ 6.980154] [VFE_WARN]Not find this sensor info, Set vfe core clk = 500000000, after Set vfe core clk = 360000000

<5>[ 7.004826] [VFE]mclk on

<4>[ 7.086256] [VFE_WARN]value: -1, min: 0, max: 128

<4>[ 7.086264]

<4>[ 7.097505] [VFE_WARN]value: -1, min: 0, max: 255

<4>[ 7.097512]

<5>[ 7.116722] [VFE]V4L2_MBUS_CSI2,4 lane,bus1 channel,rx 1 channel

<7>[ 7.169600] [IMX179S]s_fmt = 301c, width = 1072, height = 1072

<7>[ 7.176233] [IMX179S]s_fmt end

<5>[ 7.179723] [VFE]width_input = 1104, height_input = 1104, width = 1072, height = 1072

<7>[ 7.188557] [ISP] full_size width = 1072, height = 1072.

<7>[ 7.194532] [ISP] scale width = 640, height = 640

<5>[ 7.199891] [VFE]dev->buf_byte_size = 2953216, double_ch_flag = 1

<5>[ 7.206729] [VFE]Init isp ini configs from isp_cfg.

<7>[ 7.212512] [ISP] VIDEO_MODE!

<5>[ 7.277065] [VFE]put 1 frame into one buf to output!

<5>[ 7.282807] [VFE]buffer_setup, buffer count=10, size=2957312

<3>[ 7.336240] ¡ï¡¤newcdr¡¤¡ï: startPreview finished

<5>[ 7.362980] [VFE]capture video mode!

<7>[ 7.363070] [ISP]: Set Scene, Scene ID is 0.

<7>[ 7.363079] [ISP] VIDEO_MODE!

<5>[ 7.379007] [VFE]capture video first frame done!

<6>[ 7.394816] init: waitpid returned pid 59, status = 00000000

<5>[ 7.406069] init: process 'startupSound', pid 59 exited

<5>[ 7.421906] [VFE]V4L2_MBUS_CSI2,4 lane,bus1 channel,rx 1 channel

<7>[ 7.479526] [IMX179S]s_fmt = 301c, width = 1104, height = 1104

<7>[ 7.486147] [IMX179S]s_fmt end

<5>[ 7.489641] [VFE]width_input = 1104, height_input = 1104, width = 1104, height = 1104

<7>[ 7.498474] [ISP] full_size width = 1104, height = 1104.

<7>[ 7.504447] [ISP] scale width = 640, height = 640

<5>[ 7.509806] [VFE]dev->buf_byte_size = 3059712, double_ch_flag = 1

<5>[ 7.516644] [VFE]Init isp ini configs from isp_cfg.

<7>[ 7.522428] [ISP] VIDEO_MODE!

<5>[ 7.586975] [VFE]put 1 frame into one buf to output!

<5>[ 7.592714] [VFE]buffer_setup, buffer count=10, size=3063808

<5>[ 7.672181] [VFE]capture video mode!

<7>[ 7.676316] [ISP]: Set Scene, Scene ID is 0.

<7>[ 7.681254] [ISP] VIDEO_MODE!

<5>[ 7.688842] [VFE]capture video first frame done!

<5>[ 7.700227] [VFE]V4L2_MBUS_CSI2,4 lane,bus1 channel,rx 1 channel

<7>[ 7.759454] [IMX179S]s_fmt = 301c, width = 1440, height = 1440

<7>[ 7.766022] [IMX179S]s_fmt end

<5>[ 7.769511] [VFE]width_input = 2208, height_input = 2208, width = 1440, height = 1440

<7>[ 7.778342] [ISP] full_size width = 1440, height = 1440.

<7>[ 7.784386] [ISP] scale width = 640, height = 640

<5>[ 7.789676] [VFE]dev->buf_byte_size = 4341760, double_ch_flag = 1

<5>[ 7.796570] [VFE]Init isp ini configs from isp_cfg.

<7>[ 7.802314] [ISP] VIDEO_MODE!

<5>[ 7.866863] [VFE]put 1 frame into one buf to output!

<5>[ 7.872664] [VFE]buffer_setup, buffer count=5, size=4345856

<5>[ 7.975548] [VFE]capture video mode!

<7>[ 7.979844] [ISP]: Set Scene, Scene ID is 0.

<7>[ 7.984794] [ISP] VIDEO_MODE!

<5>[ 8.008770] [VFE]capture video first frame done!

<4>[ 8.061504] [DISP] check_dirty_rect,line:1067:dirty[251,3,1,1],crop[64,64,128,64]

<4>[ 8.070167] [DISP] check_dirty_rect,line:1067:dirty[223,3,1,1],crop[64,64,128,64]

<4>[ 8.079028] [DISP] check_dirty_rect,line:1067:dirty[190,3,1,1],crop[64,64,128,64]

<4>[ 8.096308] [DISP] check_dirty_rect,line:1067:dirty[260,48,40,20],crop[64,64,128,64]

<6>[ 8.233922] init: processing action 0xbc2aa8 (property:sys.usb.config=mass_storage,adb)

<6>[ 8.250777] init: command 'write' r=0

<6>[ 8.265557] init: command 'write' r=0

<6>[ 8.269874] init: command 'write' r=0

<6>[ 8.291039] init: command 'write' r=0

<6>[ 8.306184] init: command 'write' r=0

<6>[ 8.320169] init: command 'setprop' r=0

<7>[ 8.618751] RTL871X: module init start

<7>[ 8.623063] RTL871X: rtl8189es v4.3.0.4_11916.20140724_COB

<7>[ 8.629285] RTL871X: build time: May 23 2016 15:43:58

<7>[ 8.635001] [wifi_pm]: set wl_reg_on 0 !

<7>[ 8.690080] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 8.701416] [mmc]: sdc1 power_supply is null

<7>[ 8.730051] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 8.762358] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52, RTO !!

<7>[ 8.771577] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52, RTO !!

<7>[ 8.780298] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 8.793304] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 8.803626] [wifi_pm]: set wl_reg_on 1 !

<7>[ 8.810168] RTL871X: module init ret=0

<7>[ 8.814434] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 8, RTO !!

<6>[ 8.822936] *******************Try sdio*******************

<7>[ 8.838889] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 8.878145] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B

<7>[ 8.890611] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B

<7>[ 8.901795] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B

<6>[ 8.913875] mmc1: new high speed SDIO card at address 0001

<7>[ 8.931266] bFWReady == _FALSE call reset 8051...

<5>[ 8.937527] init: starting 'adbd'

<6>[ 8.947591] wdt_set_tmout, write 0x00000080 to mode reg 0xf1c20cb8, actual timeout 10 sec

<6>[ 8.956806] wdt_enable, write reg 0xf1c20cb8 val 0x00000081

<5>[ 8.964822] init: starting 'standby'

<6>[ 8.969815] init: Created socket '/dev/socket/adbd' with mode '660', user '1000', group '1000'

<6>[ 8.994358] wdt_enable, write reg 0xf1c20cb8 val 0x00000080

<6>[ 9.023726] adb_open

<7>[ 9.027352] ep_matches, wrn: endpoint already claimed, ep(0xc04df904, 0xc9623480, ep1in-bulk)

<6>[ 9.038444] wdt_set_tmout, write 0x00000080 to mode reg 0xf1c20cb8, actual timeout 10 sec

<6>[ 9.048378] adb_bind_config

<7>[ 9.051618] ep_matches, wrn: endpoint already claimed, ep(0xc04df904, 0xc9623480, ep1in-bulk)

<7>[ 9.061233] ep_matches, wrn: endpoint already claimed, ep(0xc04df950, 0xc9623480, ep1out-bulk)

<7>[ 9.070931] ep_matches, wrn: endpoint already claimed, ep(0xc04df904, 0xc9623480, ep1in-bulk)

<7>[ 9.080583] ep_matches, wrn: endpoint already claimed, ep(0xc04df950, 0xc9623480, ep1out-bulk)

<7>[ 9.090224] ep_matches, wrn: endpoint already claimed, ep(0xc04df99c, 0xc966ec80, ep2in-bulk)

<6>[ 9.101228] wdt_set_tmout, write 0x00000070 to mode reg 0xf1c20cb8, actual timeout 8 sec

<6>[ 9.110441] wdt_enable, write reg 0xf1c20cb8 val 0x00000071

<7>[ 9.203181] bFWReady == _FALSE call reset 8051...

<7>[ 9.226270] bFWReady == _FALSE call reset 8051...

<7>[ 9.257819] RTL871X: rtw_ndev_init(wlan0)

<7>[ 9.281331] RTL871X: rtw_ndev_init(wlan1)

<6>[ 9.310376] *******************sdio init ok*******************

<6>[ 38.350065] LCD_panel_exit: enter sleep

<4>[ 38.700316] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL

<4>[ 39.657425] [DISP] disp_device_attached_and_enable,line:160:attched ok, mgr0<-->device0, type=1, mode=0

<4>[ 39.668738] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL

<3>[ 40.120038] [fangjianjun]:this is for lcd_panel_st7735s_init+++++++++++++

<4>[ 48.935794] [DISP] check_dirty_rect,line:1067:dirty[251,3,1,1],crop[64,64,128,64]

<4>[ 48.949188] [DISP] check_dirty_rect,line:1067:dirty[260,48,40,20],crop[64,64,128,64]

<5>[ 65.230167] [VFE]V4L2_MBUS_CSI2,4 lane,bus1 channel,rx 1 channel

<7>[ 65.289584] [IMX179S]s_fmt = 301c, width = 2048, height = 2048

<7>[ 65.296153] [IMX179S]s_fmt end

<5>[ 65.299657] [VFE]width_input = 2208, height_input = 2208, width = 2048, height = 2048

<7>[ 65.308507] [ISP] full_size width = 2048, height = 2048.

<7>[ 65.314542] [ISP] scale width = 640, height = 640

<5>[ 65.319833] [VFE]dev->buf_byte_size = 7520256, double_ch_flag = 1

<5>[ 65.326678] [VFE]Init isp ini configs from isp_cfg.

<7>[ 65.332469] [ISP] VIDEO_MODE!

<5>[ 65.397225] [VFE]put 1 frame into one buf to output!

<5>[ 65.403135] [VFE]buffer_setup, buffer count=5, size=7524352

<5>[ 65.505674] [VFE]capture video mode!

<7>[ 65.509981] [ISP]: Set Scene, Scene ID is 0.

<7>[ 65.514983] [ISP] VIDEO_MODE!

<5>[ 65.539013] [VFE]capture video first frame done!

<3>[ 77.113079] ¡ï¡¤newcdr¡¤¡ï: [Firmware Version: fjj@fuxin360imx179s_sdv 2016-07-18 15:19:01]

<3>[ 77.123861] ¡ï¡¤newcdr¡¤¡ï: ===power capacity: 36%/100%===

<4>[ 108.618649] [DISP] check_dirty_rect,line:1067:dirty[251,3,1,1],crop[64,64,128,64]

<4>[ 108.640301] [DISP] check_dirty_rect,line:1067:dirty[260,48,40,20],crop[64,64,128,64]

<5>[ 115.614367] [VFE]V4L2_MBUS_CSI2,4 lane,bus1 channel,rx 1 channel

<7>[ 115.669547] [IMX179S]s_fmt = 301c, width = 2208, height = 2208

<7>[ 115.676122] [IMX179S]s_fmt end

<5>[ 115.679621] [VFE]width_input = 2208, height_input = 2208, width = 2208, height = 2208

<7>[ 115.688459] [ISP] full_size width = 2208, height = 2208.

<7>[ 115.694492] [ISP] scale width = 640, height = 640

<5>[ 115.699794] [VFE]dev->buf_byte_size = 8544256, double_ch_flag = 1

<5>[ 115.706634] [VFE]Init isp ini configs from isp_cfg.

<7>[ 115.712430] [ISP] VIDEO_MODE!

<5>[ 115.778605] [VFE]put 1 frame into one buf to output!

<5>[ 115.784338] [VFE]buffer_setup, buffer count=5, size=8548352

<5>[ 115.885637] [VFE]capture video mode!

<7>[ 115.889746] [ISP]: Set Scene, Scene ID is 0.

<7>[ 115.894760] [ISP] VIDEO_MODE!

<5>[ 115.918858] [VFE]capture video first frame done!

<4>[ 115.929759] [DISP] check_dirty_rect,line:1067:dirty[251,3,1,1],crop[64,64,128,64]

<4>[ 115.945675] [DISP] check_dirty_rect,line:1067:dirty[260,48,40,20],crop[64,64,128,64]

<5>[ 122.072499] [VFE]V4L2_MBUS_CSI2,4 lane,bus1 channel,rx 1 channel

<7>[ 122.129465] [IMX179S]s_fmt = 301c, width = 1440, height = 1440

<7>[ 122.136108] [IMX179S]s_fmt end

<5>[ 122.139605] [VFE]width_input = 2208, height_input = 2208, width = 1440, height = 1440

<7>[ 122.148444] [ISP] full_size width = 1440, height = 1440.

<7>[ 122.154422] [ISP] scale width = 640, height = 640

<5>[ 122.159770] [VFE]dev->buf_byte_size = 4341760, double_ch_flag = 1

<5>[ 122.166620] [VFE]Init isp ini configs from isp_cfg.

<7>[ 122.172407] [ISP] VIDEO_MODE!

<5>[ 122.237198] [VFE]put 1 frame into one buf to output!

<5>[ 122.242960] [VFE]buffer_setup, buffer count=10, size=4345856

<4>[ 122.313451] [DISP] check_dirty_rect,line:1067:dirty[251,3,1,1],crop[64,64,128,64]

<4>[ 122.327890] [DISP] check_dirty_rect,line:1067:dirty[260,48,40,20],crop[64,64,128,64]

<5>[ 122.345551] [VFE]capture video mode!

<7>[ 122.349734] [ISP]: Set Scene, Scene ID is 0.

<7>[ 122.354665] [ISP] VIDEO_MODE!

<5>[ 122.378775] [VFE]capture video first frame done!

<4>[ 124.884242] [DISP] check_dirty_rect,line:1067:dirty[251,3,1,1],crop[64,64,128,64]

<4>[ 124.892845] [DISP] check_dirty_rect,line:1067:dirty[223,3,1,1],crop[64,64,128,64]

<4>[ 124.901526] [DISP] check_dirty_rect,line:1067:dirty[190,3,1,1],crop[64,64,128,64]

<4>[ 124.915560] [DISP] check_dirty_rect,line:1067:dirty[260,48,40,20],crop[64,64,128,64]

<4>[ 132.004796] [DISP] check_dirty_rect,line:1067:dirty[251,3,1,1],crop[64,64,128,64]

<4>[ 132.025800] [DISP] check_dirty_rect,line:1067:dirty[260,48,40,20],crop[64,64,128,64]

<5>[ 133.017625] [VFE]V4L2_MBUS_CSI2,4 lane,bus1 channel,rx 1 channel

<7>[ 133.079589] [IMX179S]s_fmt = 301c, width = 2208, height = 2208

<7>[ 133.086221] [IMX179S]s_fmt end

<5>[ 133.089708] [VFE]width_input = 2208, height_input = 2208, width = 2208, height = 2208

<7>[ 133.098548] [ISP] full_size width = 2208, height = 2208.

<7>[ 133.104523] [ISP] scale width = 640, height = 640

<5>[ 133.109827] [VFE]dev->buf_byte_size = 8544256, double_ch_flag = 1

<5>[ 133.116727] [VFE]Init isp ini configs from isp_cfg.

<7>[ 133.122454] [ISP] VIDEO_MODE!

<5>[ 133.188810] [VFE]put 1 frame into one buf to output!

<5>[ 133.194621] [VFE]buffer_setup, buffer count=5, size=8548352

<4>[ 133.262543] [DISP] check_dirty_rect,line:1067:dirty[251,3,1,1],crop[64,64,128,64]

<4>[ 133.279030] [DISP] check_dirty_rect,line:1067:dirty[260,48,40,20],crop[64,64,128,64]

<5>[ 133.295674] [VFE]capture video mode!

<7>[ 133.299767] [ISP]: Set Scene, Scene ID is 0.

<7>[ 133.304761] [ISP] VIDEO_MODE!

<5>[ 133.328896] [VFE]capture video first frame done!

<7>[ 153.845048] [mmc]: mmc 0 detect change, present 1

<7>[ 154.350407] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.366900] [mmc]: sdc0 power_supply is null

<7>[ 154.390032] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.422387] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!

<7>[ 154.431954] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!

<7>[ 154.443909] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.459269] [mmc]: mmc 0 detect change, present 0

<7>[ 154.467236] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<6>[ 154.478806] *******************Try sdio*******************

<6>[ 154.485088] *******************Try sd *******************

<6>[ 154.491239] *******************Try mmc*******************

<7>[ 154.497344] [mmc]: sdc0 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.508213] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.518419] [mmc]: sdc0 power_supply is null

<7>[ 154.525856] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.537189] [mmc]: sdc0 power_supply is null

<7>[ 154.563525] [mmc]: sdc0 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.591551] [mmc]: sdc0 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.604533] [mmc]: sdc0 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<6>[ 154.616093] *******************Try sdio*******************

<6>[ 154.622349] *******************Try sd *******************

<6>[ 154.628769] *******************Try mmc*******************

<7>[ 154.634916] [mmc]: sdc0 set ios: clk 300000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.645450] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.657369] [mmc]: sdc0 power_supply is null

<7>[ 154.664905] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.676275] [mmc]: sdc0 power_supply is null

<7>[ 154.700072] [mmc]: sdc0 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.731606] [mmc]: sdc0 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.744254] [mmc]: sdc0 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<6>[ 154.755771] *******************Try sdio*******************

<6>[ 154.767456] *******************Try sd *******************

<6>[ 154.773634] *******************Try mmc*******************

<7>[ 154.779721] [mmc]: sdc0 set ios: clk 200000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.790262] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.800755] [mmc]: sdc0 power_supply is null

<7>[ 154.808188] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.819522] [mmc]: sdc0 power_supply is null

<7>[ 154.850053] [mmc]: sdc0 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.881571] [mmc]: sdc0 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.898844] [mmc]: sdc0 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<6>[ 154.910461] *******************Try sdio*******************

<6>[ 154.916704] *******************Try sd *******************

<6>[ 154.922862] *******************Try mmc*******************

<7>[ 154.928983] [mmc]: sdc0 set ios: clk 150000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.939834] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 154.950053] [mmc]: sdc0 power_supply is null

<7>[ 155.365065] [mmc]: mmc 0 detect change, present 1

<7>[ 155.870069] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 155.881397] [mmc]: sdc0 power_supply is null

<7>[ 155.900059] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 155.932413] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!

<7>[ 155.941575] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!

<7>[ 155.949904] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 155.963189] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<6>[ 155.980077] *******************Try sdio*******************

<7>[ 155.987057] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!

<7>[ 156.000911] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!

<7>[ 156.010059] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!

<7>[ 156.019063] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!

<6>[ 156.031674] *******************Try sd *******************

<7>[ 156.038465] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 156.049147] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 156.062518] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 156.201532] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B

<7>[ 156.212780] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B

<7>[ 156.223700] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B

<7>[ 156.234380] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B

<6>[ 156.245003] mmc0: new high speed SDXC card at address 0001

<6>[ 156.251845] mmcblk0: mmc0:0001 00000 59.6 GiB

<6>[ 156.270006] mmcblk0: unknown partition table

<6>[ 156.285000] *******************sd init ok*******************

<3>[ 156.432294] FAT-fs (mmcblk0): bogus number of reserved sectors

<6>[ 156.438883] FAT-fs (mmcblk0): Can't find a valid FAT filesystem

<5>[ 175.801383] [VFE]V4L2_MBUS_CSI2,4 lane,bus1 channel,rx 1 channel

<7>[ 175.859467] [IMX179S]s_fmt = 301c, width = 1440, height = 1440

<7>[ 175.866111] [IMX179S]s_fmt end

<5>[ 175.869615] [VFE]width_input = 2208, height_input = 2208, width = 1440, height = 1440

<7>[ 175.878456] [ISP] full_size width = 1440, height = 1440.

<7>[ 175.884431] [ISP] scale width = 640, height = 640

<5>[ 175.889780] [VFE]dev->buf_byte_size = 4341760, double_ch_flag = 1

<5>[ 175.896629] [VFE]Init isp ini configs from isp_cfg.

<7>[ 175.902411] [ISP] VIDEO_MODE!

<5>[ 175.967130] [VFE]put 1 frame into one buf to output!

<5>[ 175.972840] [VFE]buffer_setup, buffer count=10, size=4345856

<5>[ 176.075559] [VFE]capture video mode!

<7>[ 176.080415] [ISP]: Set Scene, Scene ID is 0.

<7>[ 176.085421] [ISP] VIDEO_MODE!

<5>[ 176.108780] [VFE]capture video first frame done!

<4>[ 176.126421] [DISP] check_dirty_rect,line:1067:dirty[251,3,1,1],crop[64,64,128,64]

<4>[ 176.140514] [DISP] check_dirty_rect,line:1067:dirty[260,48,40,20],crop[64,64,128,64]

<4>[ 177.037434] [DISP] check_dirty_rect,line:1067:dirty[251,3,1,1],crop[64,64,128,64]

<4>[ 177.046925] [DISP] check_dirty_rect,line:1067:dirty[223,3,1,1],crop[64,64,128,64]

<4>[ 177.055650] [DISP] check_dirty_rect,line:1067:dirty[190,3,1,1],crop[64,64,128,64]

<4>[ 177.078287] [DISP] check_dirty_rect,line:1067:dirty[260,48,40,20],crop[64,64,128,64]

<4>[ 220.723102] [DISP] check_dirty_rect,line:1067:dirty[251,3,1,1],crop[64,64,128,64]

<4>[ 220.745331] [DISP] check_dirty_rect,line:1067:dirty[260,48,40,20],crop[64,64,128,64]

<7>[ 240.481832] charger->usb_valid = 1

<6>[ 240.775236] android_usb gadget: high-speed config #1: android

<7>[ 242.097863] charger->usb_valid = 1

<7>[ 244.490289] set usbcur 0 mA

<7>[ 244.493701] set usbvol 4000 mV

<6>[ 250.480040] LCD_panel_exit: enter sleep

<4>[ 250.833873] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL

<4>[ 251.388580] adbd (223): /proc/223/oom_adj is deprecated, please use /proc/223/oom_score_adj instead.

<4>[ 1496.803391] [DISP] disp_device_attached_and_enable,line:160:attched ok, mgr0<-->device0, type=1, mode=0

<4>[ 1496.814710] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL

<3>[ 1497.275041] [fangjianjun]:this is for lcd_panel_st7735s_init+++++++++++++

<6>[ 1502.101451] adb_release

<6>[ 1502.110731] adb_open

<7>[ 1502.110764] ep_matches, wrn: endpoint already claimed, ep(0xc04df904, 0xc9623480, ep1in-bulk)

<6>[ 1502.110777] adb_bind_config

<7>[ 1502.110787] ep_matches, wrn: endpoint already claimed, ep(0xc04df904, 0xc9623480, ep1in-bulk)

<7>[ 1502.110798] ep_matches, wrn: endpoint already claimed, ep(0xc04df950, 0xc9623480, ep1out-bulk)

<7>[ 1502.110810] ep_matches, wrn: endpoint already claimed, ep(0xc04df904, 0xc9623480, ep1in-bulk)

<7>[ 1502.110821] ep_matches, wrn: endpoint already claimed, ep(0xc04df950, 0xc9623480, ep1out-bulk)

<7>[ 1502.110833] ep_matches, wrn: endpoint already claimed, ep(0xc04df99c, 0xc966ec80, ep2in-bulk)

<7>[ 1502.178278] charger->usb_valid = 0

<7>[ 1502.182190] set usb vol-lim to 4000 mV, cur-lim to 0 mA

<5>[ 1502.346924] [VFE]V4L2_MBUS_CSI2,4 lane,bus1 channel,rx 1 channel

<7>[ 1502.399581] [IMX179S]s_fmt = 301c, width = 2048, height = 2048

<7>[ 1502.406154] [IMX179S]s_fmt end

<5>[ 1502.409703] [VFE]width_input = 2208, height_input = 2208, width = 2048, height = 2048

<7>[ 1502.418484] [ISP] full_size width = 2048, height = 2048.

<7>[ 1502.424529] [ISP] scale width = 640, height = 640

<5>[ 1502.429821] [VFE]dev->buf_byte_size = 7520256, double_ch_flag = 1

<5>[ 1502.436718] [VFE]Init isp ini configs from isp_cfg.

<7>[ 1502.442444] [ISP] VIDEO_MODE!

<5>[ 1502.507273] [VFE]put 1 frame into one buf to output!

<5>[ 1502.513057] [VFE]buffer_setup, buffer count=5, size=7524352

<5>[ 1502.615673] [VFE]capture video mode!

<7>[ 1502.619980] [ISP]: Set Scene, Scene ID is 0.

<7>[ 1502.624928] [ISP] VIDEO_MODE!

<5>[ 1502.648897] [VFE]capture video first frame done!

<5>[ 1521.826156] [VFE]V4L2_MBUS_CSI2,4 lane,bus1 channel,rx 1 channel

<7>[ 1521.884572] [IMX179S]s_fmt = 301c, width = 2208, height = 2208

<7>[ 1521.891204] [IMX179S]s_fmt end

<5>[ 1521.894692] [VFE]width_input = 2208, height_input = 2208, width = 2208, height = 2208

<7>[ 1521.903538] [ISP] full_size width = 2208, height = 2208.

<7>[ 1521.909506] [ISP] scale width = 640, height = 640

<5>[ 1521.914863] [VFE]dev->buf_byte_size = 8544256, double_ch_flag = 1

<5>[ 1521.921700] [VFE]Init isp ini configs from isp_cfg.

<7>[ 1521.927491] [ISP] VIDEO_MODE!

<5>[ 1521.992325] [VFE]put 1 frame into one buf to output!

<5>[ 1521.998105] [VFE]buffer_setup, buffer count=5, size=8548352

<5>[ 1522.100658] [VFE]capture video mode!

<7>[ 1522.105049] [ISP]: Set Scene, Scene ID is 0.

<7>[ 1522.109957] [ISP] VIDEO_MODE!

<5>[ 1522.133881] [VFE]capture video first frame done!

<4>[ 1522.145807] [DISP] check_dirty_rect,line:1067:dirty[251,3,1,1],crop[64,64,128,64]

<4>[ 1522.161806] [DISP] check_dirty_rect,line:1067:dirty[260,48,40,20],crop[64,64,128,64]

<7>[ 1540.981348] charger->usb_valid = 1

<6>[ 1541.279664] android_usb gadget: high-speed config #1: android

<7>[ 1542.605059] charger->usb_valid = 1

<7>[ 1544.990282] set usbcur 0 mA

<7>[ 1544.998447] set usbvol 4000 mV

<7>[ 1549.758602] usb open backing file: /dev/block/vold/179:0, 0xc9623380

<6>[ 1578.751872] LCD_panel_exit: enter sleep

<4>[ 1579.100320] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL

<6>[ 1843.530259] adb_release

<6>[ 1843.535239] adb_open

<7>[ 1843.537823] ep_matches, wrn: endpoint already claimed, ep(0xc04df904, 0xc9623480, ep1in-bulk)

<4>[ 1843.548701] [DISP] disp_device_attached_and_enable,line:160:attched ok, mgr0<-->device0, type=1, mode=0

<4>[ 1843.560418] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL

<6>[ 1843.570383] adb_bind_config

<7>[ 1843.573625] ep_matches, wrn: endpoint already claimed, ep(0xc04df904, 0xc9623480, ep1in-bulk)

<7>[ 1843.583212] ep_matches, wrn: endpoint already claimed, ep(0xc04df950, 0xc9623480, ep1out-bulk)

<7>[ 1843.592921] ep_matches, wrn: endpoint already claimed, ep(0xc04df904, 0xc9623480, ep1in-bulk)

<7>[ 1843.602513] ep_matches, wrn: endpoint already claimed, ep(0xc04df950, 0xc9623480, ep1out-bulk)

<4>[ 1843.612205] [VFE_WARN] Nobody is waiting on this video buffer,buf = 0xc8bc3440

<7>[ 1843.620297] ep_matches, wrn: endpoint already claimed, ep(0xc04df99c, 0xc966ec80, ep2in-bulk)

<7>[ 1843.632691] charger->usb_valid = 0

<7>[ 1843.636549] set usb vol-lim to 4000 mV, cur-lim to 0 mA

<3>[ 1844.080058] [fangjianjun]:this is for lcd_panel_st7735s_init+++++++++++++

<7>[ 1844.831912] usb close backing file: 0xc9623380

<7>[ 1854.743598] charger->usb_valid = 1

<7>[ 1856.345211] charger->usb_valid = 1

<7>[ 1858.750282] set usbcur 0 mA

<7>[ 1858.753700] set usbvol 4000 mV

<6>[ 1874.880066] LCD_panel_exit: enter sleep

<4>[ 1875.230316] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL

<7>[ 3889.376004] charger->usb_valid = 0

<7>[ 3889.379857] set usb vol-lim to 4000 mV, cur-lim to 0 mA

<7>[ 3900.993762] charger->usb_valid = 1

<7>[ 3902.604436] charger->usb_valid = 1

<4>[ 3903.854725] [DISP] disp_device_attached_and_enable,line:160:attched ok, mgr0<-->device0, type=1, mode=0

<4>[ 3903.866066] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL

<3>[ 3904.330038] [fangjianjun]:this is for lcd_panel_st7735s_init+++++++++++++

<7>[ 3905.000281] set usbcur 0 mA

<7>[ 3905.003793] set usbvol 4000 mV

<7>[ 3916.129806] charger->usb_valid = 0

<7>[ 3916.133744] set usb vol-lim to 4000 mV, cur-lim to 0 mA

<6>[ 3935.130038] LCD_panel_exit: enter sleep

<4>[ 3935.480362] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL

<7>[ 4110.561691] charger->usb_valid = 1

<7>[ 4112.165439] charger->usb_valid = 1

<7>[ 4114.570274] set usbcur 0 mA

<7>[ 4114.573681] set usbvol 4000 mV

<4>[ 4115.213873] [DISP] disp_device_attached_and_enable,line:160:attched ok, mgr0<-->device0, type=1, mode=0

<4>[ 4115.225564] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL

<3>[ 4115.684095] [fangjianjun]:this is for lcd_panel_st7735s_init+++++++++++++

<6>[ 4146.490057] LCD_panel_exit: enter sleep

<4>[ 4146.840320] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL

<7>[ 5674.423951] ****************Set_Rset_Cap=36***********

<7>[ 5746.684007] ****************Set_Rset_Cap=35***********

<7>[ 5818.943983] ****************Set_Rset_Cap=34***********

<7>[ 5891.203969] ****************Set_Rset_Cap=33***********

<7>[ 5963.473913] ****************Set_Rset_Cap=32***********

<7>[ 6035.755242] ****************Set_Rset_Cap=31***********

<7>[ 6111.042121] ****************Set_Rset_Cap=30***********

<7>[ 6192.338430] ****************Set_Rset_Cap=29***********

<7>[ 6276.658417] ****************Set_Rset_Cap=28***********

<7>[ 6367.013966] ****************Set_Rset_Cap=27***********

<7>[ 6466.373931] ****************Set_Rset_Cap=26***********

<7>[ 6568.762195] ****************Set_Rset_Cap=25***********

<7>[ 6683.173906] ****************Set_Rset_Cap=24***********

<7>[ 6809.657556] ****************Set_Rset_Cap=23***********

<7>[ 6951.143986] ****************Set_Rset_Cap=22***********

<7>[ 7110.693923] ****************Set_Rset_Cap=21***********

<7>[ 7291.314099] ****************Set_Rset_Cap=20***********

<4>[ 7327.005904] [DISP] disp_device_attached_and_enable,line:160:attched ok, mgr0<-->device0, type=1, mode=0

<4>[ 7327.017240] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL

<3>[ 7327.475107] [fangjianjun]:this is for lcd_panel_st7735s_init+++++++++++++

<6>[ 7358.280042] LCD_panel_exit: enter sleep

<4>[ 7358.630332] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL

<7>[ 7502.053939] ****************Set_Rset_Cap=19***********

<7>[ 7806.084903] ****************Set_Rset_Cap=18***********

<7>[ 8206.433928] ****************Set_Rset_Cap=17***********

<7>[ 8348.158685] charger->usb_valid = 1

<7>[ 8352.170272] set usbcur 0 mA

<7>[ 8352.178279] set usbvol 4000 mV

<7>[ 8365.973313] ****************Set_Rset_Cap=18***********

<7>[12806.899186] charger->usb_valid = 0

<7>[12806.903124] set usb vol-lim to 4000 mV, cur-lim to 0 mA

<7>[12812.144495] charger->usb_valid = 1

<4>[12812.342129] [DISP] disp_device_attached_and_enable,line:160:attched ok, mgr0<-->device0, type=1, mode=0

<4>[12812.353709] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL

<7>[12812.554846] charger->usb_valid = 1

<6>[12812.594361] android_usb gadget: high-speed config #1: android

<3>[12812.810044] [fangjianjun]:this is for lcd_panel_st7735s_init+++++++++++++

<7>[12816.154746] set usbcur 0 mA

<7>[12816.158250] set usbvol 4000 mV

<6>[12843.620033] LCD_panel_exit: enter sleep

<4>[12843.970344] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL