- Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012]
- ============================= Boot Info Summary: ===============================
- => Grub2 (v1.99) is installed in the MBR of
- /dev/mapper/isw_becjebdjff_Volume0 and looks at sector 1 of the same hard
- drive for core.img. core.img is at this location and looks in partition 1
- for /boot/grub.
- isw_becjebdjff_Volume01: _______________________________________________________
- File system:
- Boot sector type: Unknown
- Boot sector info:
- Mounting failed: mount: unknown filesystem type ''
- isw_becjebdjff_Volume02: _______________________________________________________
- File system:
- Boot sector type: Unknown
- Boot sector info:
- Mounting failed: mount: unknown filesystem type ''
- mount: unknown filesystem type ''
- isw_becjebdjff_Volume03: _______________________________________________________
- File system: Extended Partition
- Boot sector type: Unknown
- Boot sector info:
- isw_becjebdjff_Volume05: _______________________________________________________
- File system:
- Boot sector type: Unknown
- Boot sector info:
- Mounting failed: mount: unknown filesystem type ''
- mount: unknown filesystem type ''
- mount: unknown filesystem type ''
- isw_becjebdjff_Volume06: _______________________________________________________
- File system:
- Boot sector type: Unknown
- Boot sector info:
- Mounting failed: mount: unknown filesystem type ''
- mount: unknown filesystem type ''
- mount: unknown filesystem type ''
- mount: unknown filesystem type ''
- ============================ Drive/Partition Info: =============================
- Drive: isw_becjebdjff_Volume0 _____________________________________________________________________
- Disk /dev/mapper/isw_becjebdjff_Volume0: 640.1 GB, 640141230080 bytes
- 255 heads, 63 sectors/track, 77826 cylinders, total 1250275840 sectors
- Units = sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- Partition Boot Start Sector End Sector # of Sectors Id System
- /dev/mapper/isw_becjebdjff_Volume01 2,048 3,074,047 3,072,000 27 Hidden NTFS (Recovery Environment)
- /dev/mapper/isw_becjebdjff_Volume02 * 3,074,048 738,275,327 735,201,280 7 NTFS / exFAT / HPFS
- /dev/mapper/isw_becjebdjff_Volume03 738,275,838 1,250,275,839 512,000,002 5 Extended
- /dev/mapper/isw_becjebdjff_Volume05 738,275,840 1,241,890,815 503,614,976 83 Linux
- /dev/mapper/isw_becjebdjff_Volume06 1,241,891,328 1,250,275,839 8,384,512 82 Linux swap / Solaris
- "blkid" output: ________________________________________________________________
- Device UUID TYPE LABEL
- /dev/loop0 squashfs
- /dev/mapper/isw_becjebdjff_Volume0p1 5C7AB5A97AB57FF6 ntfs Recovery
- /dev/mapper/isw_becjebdjff_Volume0p2 2006B70506B6DB4C ntfs
- /dev/mapper/isw_becjebdjff_Volume0p5 5971b933-8639-4052-9b5e-1163de6a292f ext4
- /dev/mapper/isw_becjebdjff_Volume0p6 890a8883-26cc-4a10-be0a-7de24369399b swap
- /dev/sda isw_raid_member
- /dev/sdb isw_raid_member
- /dev/sr0 iso9660 Linux Mint 13 Cinnamon 32-bit
- ========================= "ls -R /dev/mapper/" output: =========================
- /dev/mapper:
- control
- isw_becjebdjff_Volume0
- isw_becjebdjff_Volume0p1
- isw_becjebdjff_Volume0p2
- isw_becjebdjff_Volume0p3
- isw_becjebdjff_Volume0p5
- isw_becjebdjff_Volume0p6
- ================================ Mount points: =================================
- Device Mount_Point Type Options
- /dev/loop0 /rofs squashfs (ro,noatime)
- /dev/sr0 /cdrom iso9660 (ro,noatime)
- ======================== Unknown MBRs/Boot Sectors/etc: ========================
- Unknown BootLoader on isw_becjebdjff_Volume01
- Unknown BootLoader on isw_becjebdjff_Volume02
- Unknown BootLoader on isw_becjebdjff_Volume03
- Unknown BootLoader on isw_becjebdjff_Volume05
- Unknown BootLoader on isw_becjebdjff_Volume06
- =============================== StdErr Messages: ===============================
- hexdump: /dev/mapper/isw_becjebdjff_Volume01: No such file or directory
- hexdump: /dev/mapper/isw_becjebdjff_Volume01: No such file or directory
- hexdump: /dev/mapper/isw_becjebdjff_Volume02: No such file or directory
- hexdump: /dev/mapper/isw_becjebdjff_Volume02: No such file or directory
- hexdump: /dev/mapper/isw_becjebdjff_Volume03: No such file or directory
- hexdump: /dev/mapper/isw_becjebdjff_Volume03: No such file or directory
- hexdump: /dev/mapper/isw_becjebdjff_Volume05: No such file or directory
- hexdump: /dev/mapper/isw_becjebdjff_Volume05: No such file or directory
- hexdump: /dev/mapper/isw_becjebdjff_Volume06: No such file or directory
- hexdump: /dev/mapper/isw_becjebdjff_Volume06: No such file or directory
- ADDITIONAL INFORMATION :
- =================== log of boot-repair 2012-12-23__07h28 ===================
- boot-repair version : 3.197~ppa5~precise
- boot-sav version : 3.197~ppa5~precise
- glade2script version : 3.2.2~ppa45~precise
- boot-sav-extra version : 3.197~ppa5~precise
- BLKID BEFORE RAID ACTIVATION:
- /dev/loop0: TYPE="squashfs"
- /dev/sda: TYPE="isw_raid_member"
- /dev/sr0: LABEL="Linux Mint 13 Cinnamon 32-bit" TYPE="iso9660"
- /dev/sdb: TYPE="isw_raid_member"
- /dev/mapper/isw_becjebdjff_Volume0p1: LABEL="Recovery" UUID="5C7AB5A97AB57FF6" TYPE="ntfs"
- /dev/mapper/isw_becjebdjff_Volume0p2: UUID="2006B70506B6DB4C" TYPE="ntfs"
- /dev/mapper/isw_becjebdjff_Volume0p5: UUID="5971b933-8639-4052-9b5e-1163de6a292f" TYPE="ext4"
- /dev/mapper/isw_becjebdjff_Volume0p6: UUID="890a8883-26cc-4a10-be0a-7de24369399b" TYPE="swap"
- dmraid -si -c:
- dmraid -ay:
- RAID set "isw_becjebdjff_Volume0" already active
- RAID set "isw_becjebdjff_Volume0p1" already active
- RAID set "isw_becjebdjff_Volume0p2" already active
- RAID set "isw_becjebdjff_Volume0p5" already active
- RAID set "isw_becjebdjff_Volume0p6" already active
- dmraid -sa -c: isw_becjebdjff_Volume0
- boot-repair is executed in live-session (Linux Mint 13 Maya, maya, LinuxMint, i686)
- CPU op-mode(s): 32-bit, 64-bit
- file=/cdrom/preseed/mint.seed boot=casper initrd=/casper/initrd.lz quiet splash -- BOOT_IMAGE=/casper/vmlinuz
- [dmraid -sa -c] isw_becjebdjff_Volume0
- [dmraid -sa -c] isw_becjebdjff_Volume0
- [dmraid -sa -c] isw_becjebdjff_Volume0
- ls: cannot access /sys/block/mapper/isw_becjebdjff_Volume0/: No such file or directory
- fdisk: unable to seek on /dev/sda: Invalid argument
- =================== os-prober:
- /dev/mapper/isw_becjebdjff_Volume0p1:Windows Recovery Environment (loader):Windows:chain
- /dev/mapper/isw_becjebdjff_Volume0p2:Windows Vista (loader):Windows1:chain
- /dev/mapper/isw_becjebdjff_Volume0p5:Linux Mint 13 Maya (13):LinuxMint:linux
- =================== blkid:
- /dev/loop0: TYPE="squashfs"
- /dev/sda: TYPE="isw_raid_member"
- /dev/sr0: LABEL="Linux Mint 13 Cinnamon 32-bit" TYPE="iso9660"
- /dev/sdb: TYPE="isw_raid_member"
- /dev/mapper/isw_becjebdjff_Volume0p1: LABEL="Recovery" UUID="5C7AB5A97AB57FF6" TYPE="ntfs"
- /dev/mapper/isw_becjebdjff_Volume0p2: UUID="2006B70506B6DB4C" TYPE="ntfs"
- /dev/mapper/isw_becjebdjff_Volume0p5: UUID="5971b933-8639-4052-9b5e-1163de6a292f" TYPE="ext4"
- /dev/mapper/isw_becjebdjff_Volume0p6: UUID="890a8883-26cc-4a10-be0a-7de24369399b" TYPE="swap"
- [dmraid -sa -c] isw_becjebdjff_Volume0
- [dmraid -sa -c] isw_becjebdjff_Volume0
- [dmraid -sa -c] isw_becjebdjff_Volume0
- 1 disks with OS, 3 OS : 1 Linux, 0 MacOS, 2 Windows, 0 unknown type OS.
- Warning: extended partition does not start at a cylinder boundary.
- DOS and Linux will interpret the contents differently.
- lseek: Invalid argument
- sfdisk: seek error on /dev/sda - cannot seek to 738275838
- sfdisk: ERROR: sector 0 does not have an msdos signature
- /dev/sdb: unrecognized partition table type
- No partitions found
- Warning: extended partition does not start at a cylinder boundary.
- DOS and Linux will interpret the contents differently.
- Disk /dev/sdb doesn't contain a valid partition table
- Disk /dev/sdb doesn't contain a valid partition table
- =================== mapper/isw_becjebdjff_Volume0p5/etc/default/grub :
- # If you change this file, run 'update-grub' afterwards to update
- # /boot/grub/grub.cfg.
- # For full documentation of the options in this file, see:
- # info -f grub -n 'Simple configuration'
- GRUB_DEFAULT=0
- #GRUB_HIDDEN_TIMEOUT=0
- GRUB_HIDDEN_TIMEOUT_QUIET=true
- GRUB_TIMEOUT=10
- GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
- GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
- GRUB_CMDLINE_LINUX=""
- # Uncomment to enable BadRAM filtering, modify to suit your needs
- # This works with Linux (no patch required) and with any kernel that obtains
- # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
- #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
- # Uncomment to disable graphical terminal (grub-pc only)
- #GRUB_TERMINAL=console
- # The resolution used on graphical terminal
- # note that you can use only modes which your graphic card supports via VBE
- # you can see them in real GRUB with the command `vbeinfo'
- #GRUB_GFXMODE=640x480
- # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
- #GRUB_DISABLE_LINUX_UUID=true
- # Uncomment to disable generation of recovery mode menu entries
- #GRUB_DISABLE_RECOVERY="true"
- # Uncomment to get a beep at grub start
- #GRUB_INIT_TUNE="480 440 1"
- =================== mapper/isw_becjebdjff_Volume0p5/etc/grub.d/ :
- drwxr-xr-x 2 root root 4096 Dec 23 06:15 grub.d
- drwxr-xr-x 2 root root 4096 Dec 22 20:02 grub.d.bak
- total 52
- -rwxr-xr-x 1 root root 6743 Sep 12 20:19 00_header
- -rwxr-xr-x 1 root root 5522 Sep 12 20:05 05_debian_theme
- -rwxr-xr-x 1 root root 7407 Sep 12 20:19 10_linux
- -rwxr-xr-x 1 root root 6335 Sep 12 20:19 20_linux_xen
- -rwxr-xr-x 1 root root 7603 Sep 12 20:19 30_os-prober
- -rwxr-xr-x 1 root root 214 Sep 12 20:19 40_custom
- -rwxr-xr-x 1 root root 95 Sep 12 20:19 41_custom
- -rw-r--r-- 1 root root 483 Sep 12 20:19 README
- =================== mapper/isw_becjebdjff_Volume0p5recordfail=1/grub/grubenv :
- recordfail=1
- =================== UEFI/Legacy mode:
- This live-session is not EFI-compatible.
- SecureBoot maybe enabled.
- =================== PARTITIONS & DISKS:
- mapper/isw_becjebdjff_Volume0p1 : mapper/isw_becjebdjff_Volume0, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, BOOTMGR, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/mapper/isw_becjebdjff_Volume0p1.
- mapper/isw_becjebdjff_Volume0p2 : mapper/isw_becjebdjff_Volume0, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/mapper/isw_becjebdjff_Volume0p2.
- mapper/isw_becjebdjff_Volume0p5 : mapper/isw_becjebdjff_Volume0, not-sepboot, grubenv-ng grub2, grub-pc , update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/mapper/isw_becjebdjff_Volume0p5.
- sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, no-os, 2048 sectors * 512 bytes
- sdb : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, no-os, 2048 sectors * 512 bytes
- mapper/isw_becjebdjff_Volume0 : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
- =================== parted -l:
- Error: Can't have a partition outside the disk!
- Error: /dev/sdb: unrecognised disk label
- Model: Linux device-mapper (linear) (dm)
- Disk /dev/mapper/isw_becjebdjff_Volume0p2: 376GB
- Sector size (logical/physical): 512B/512B
- Partition Table: loop
- Number Start End Size File system Flags
- 1 0.00B 376GB 376GB ntfs
- Model: Linux device-mapper (linear) (dm)
- Disk /dev/mapper/isw_becjebdjff_Volume0p3: 262GB
- Sector size (logical/physical): 512B/512B
- Partition Table: msdos
- Number Start End Size Type File system Flags
- 1 1024B 258GB 258GB primary ext4
- 2 258GB 262GB 4293MB extended
- 5 258GB 262GB 4293MB logical linux-swap(v1)
- Model: Linux device-mapper (linear) (dm)
- Disk /dev/mapper/isw_becjebdjff_Volume0p5: 258GB
- Sector size (logical/physical): 512B/512B
- Partition Table: loop
- Number Start End Size File system Flags
- 1 0.00B 258GB 258GB ext4
- Model: Linux device-mapper (linear) (dm)
- Disk /dev/mapper/isw_becjebdjff_Volume0p6: 4293MB
- Sector size (logical/physical): 512B/512B
- Partition Table: loop
- Number Start End Size File system Flags
- 1 0.00B 4293MB 4293MB linux-swap(v1)
- Model: Linux device-mapper (linear) (dm)
- Disk /dev/mapper/isw_becjebdjff_Volume0p1: 1573MB
- Sector size (logical/physical): 512B/512B
- Partition Table: loop
- Number Start End Size File system Flags
- 1 0.00B 1573MB 1573MB ntfs
- Model: Linux device-mapper (striped) (dm)
- Disk /dev/mapper/isw_becjebdjff_Volume0: 640GB
- Sector size (logical/physical): 512B/512B
- Partition Table: msdos
- Number Start End Size Type File system Flags
- 1 1049kB 1574MB 1573MB primary ntfs diag
- 2 1574MB 378GB 376GB primary ntfs boot
- 3 378GB 640GB 262GB extended
- 5 378GB 636GB 258GB logical ext4
- 6 636GB 640GB 4293MB logical linux-swap(v1)
- Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0
- has been opened read-only.
- Error: Invalid partition table - recursive partition on /dev/sr0.
- =================== parted -lm:
- Error: Can't have a partition outside the disk!
- Error: /dev/sdb: unrecognised disk label
- BYT;
- /dev/mapper/isw_becjebdjff_Volume0p2:376GB:dm:512:512:loop:Linux device-mapper (linear);
- 1:0.00B:376GB:376GB:ntfs::;
- BYT;
- /dev/mapper/isw_becjebdjff_Volume0p3:262GB:dm:512:512:msdos:Linux device-mapper (linear);
- 1:1024B:258GB:258GB:ext4::;
- 2:258GB:262GB:4293MB:::;
- 5:258GB:262GB:4293MB:linux-swap(v1)::;
- BYT;
- /dev/mapper/isw_becjebdjff_Volume0p5:258GB:dm:512:512:loop:Linux device-mapper (linear);
- 1:0.00B:258GB:258GB:ext4::;
- BYT;
- /dev/mapper/isw_becjebdjff_Volume0p6:4293MB:dm:512:512:loop:Linux device-mapper (linear);
- 1:0.00B:4293MB:4293MB:linux-swap(v1)::;
- BYT;
- /dev/mapper/isw_becjebdjff_Volume0p1:1573MB:dm:512:512:loop:Linux device-mapper (linear);
- 1:0.00B:1573MB:1573MB:ntfs::;
- BYT;
- /dev/mapper/isw_becjebdjff_Volume0:640GB:dm:512:512:msdos:Linux device-mapper (striped);
- 1:1049kB:1574MB:1573MB:ntfs::diag;
- 2:1574MB:378GB:376GB:ntfs::boot;
- 3:378GB:640GB:262GB:::;
- 5:378GB:636GB:258GB:ext4::;
- 6:636GB:640GB:4293MB:linux-swap(v1)::;
- Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0
- has been opened read-only.
- Error: Invalid partition table - recursive partition on /dev/sr0.
- =================== mount:
- /cow on / type overlayfs (rw)
- proc on /proc type proc (rw,noexec,nosuid,nodev)
- sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
- udev on /dev type devtmpfs (rw,mode=0755)
- devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
- tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
- /dev/sr0 on /cdrom type iso9660 (ro,noatime)
- /dev/loop0 on /rofs type squashfs (ro,noatime)
- none on /sys/fs/fuse/connections type fusectl (rw)
- none on /sys/kernel/debug type debugfs (rw)
- none on /sys/kernel/security type securityfs (rw)
- tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
- none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
- none on /run/shm type tmpfs (rw,nosuid,nodev)
- binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
- gvfs-fuse-daemon on /home/mint/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=mint)
- /dev/mapper/isw_becjebdjff_Volume0p1 on /mnt/boot-sav/mapper/isw_becjebdjff_Volume0p1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=2048)
- /dev/mapper/isw_becjebdjff_Volume0p2 on /mnt/boot-sav/mapper/isw_becjebdjff_Volume0p2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
- /dev/mapper/isw_becjebdjff_Volume0p5 on /mnt/boot-sav/mapper/isw_becjebdjff_Volume0p5 type ext4 (rw)
- =================== ls:
- /sys/block/dm-0 (filtered): alignment_offset bdi capability dev discard_alignment dm ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
- /sys/block/dm-1 (filtered): alignment_offset bdi capability dev discard_alignment dm ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
- /sys/block/dm-3 (filtered): alignment_offset bdi capability dev discard_alignment dm ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
- /sys/block/dm-4 (filtered): alignment_offset bdi capability dev discard_alignment dm ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
- /sys/block/dm-5 (filtered): alignment_offset bdi capability dev discard_alignment dm ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
- /sys/block/dm-6 (filtered): alignment_offset bdi capability dev discard_alignment dm ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
- /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
- /sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
- /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
- /dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dm-0 dm-1 dm-3 dm-4 dm-5 dm-6 dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hidraw1 hpet input kmsg log mapper mcelog mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sdb sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uinput urandom usbmon0 usbmon1 usbmon2 usbmon3 usbmon4 usbmon5 usbmon6 usbmon7 vga_arbiter zero
- ls /dev/mapper: control isw_becjebdjff_Volume0 isw_becjebdjff_Volume0p1 isw_becjebdjff_Volume0p2 isw_becjebdjff_Volume0p3 isw_becjebdjff_Volume0p5 isw_becjebdjff_Volume0p6
- fdisk: unable to seek on /dev/sda: Invalid argument
- =================== df -Th:
- Filesystem Type Size Used Avail Use% Mounted on
- /cow overlayfs 1.5G 125M 1.4G 9% /
- udev devtmpfs 1.5G 12K 1.5G 1% /dev
- tmpfs tmpfs 605M 1012K 604M 1% /run
- /dev/sr0 iso9660 817M 817M 0 100% /cdrom
- /dev/loop0 squashfs 788M 788M 0 100% /rofs
- tmpfs tmpfs 1.5G 36K 1.5G 1% /tmp
- none tmpfs 5.0M 0 5.0M 0% /run/lock
- none tmpfs 1.5G 120K 1.5G 1% /run/shm
- /dev/mapper/isw_becjebdjff_Volume0p1 fuseblk 1.5G 225M 1.3G 15% /mnt/boot-sav/mapper/isw_becjebdjff_Volume0p1
- /dev/mapper/isw_becjebdjff_Volume0p2 fuseblk 351G 85G 267G 25% /mnt/boot-sav/mapper/isw_becjebdjff_Volume0p2
- /dev/mapper/isw_becjebdjff_Volume0p5 ext4 240G 6.5G 222G 3% /mnt/boot-sav/mapper/isw_becjebdjff_Volume0p5
- =================== fdisk -l:
- Partition outside the disk detected.
- =================== Recommended repair
- Recommended-Repair
- This setting will purge (in order to enable-raid) and reinstall the grub2 of mapper/isw_becjebdjff_Volume0p5 into the MBR of mapper/isw_becjebdjff_Volume0.
- The boot flag will be placed on mapper/isw_becjebdjff_Volume0p2.
- Additional repair will be performed: unhide-bootmenu-10s
- parted /dev/mapper/isw_becjebdjff_Volume0 set 2 boot on
- Error: Partition(s) 5 on /dev/mapper/isw_becjebdjff_Volume0 have been written,
- but we have been unable to inform the kernel of the change, probably because
- it/they are in use. As a result, the old partition(s) will remain in use. You
- should reboot now before making further changes.
- fdisk: unable to seek on /dev/sda: Invalid argument
- mv: cannot stat `/mnt/boot-sav/mapper/isw_becjebdjff_Volume0p5/etc/resolv.conf': No such file or directory
- cp: cannot stat `/etc/resolv.conf': No such file or directory
- chroot /mnt/boot-sav/mapper/isw_becjebdjff_Volume0p5 apt-get -y --force-yes update
- Purge the GRUB of mapper/isw_becjebdjff_Volume0p5
- grub-pc available
- 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 507 not upgraded.
- DEBCHECK debOK, grub-pc
- DEBCHECK debOK
- shim-signed NOT available (apt-cache policy problem)
- linux-signed-generic NOT available (apt-cache policy problem)
- Please type: sudo chroot "/mnt/boot-sav/mapper/isw_becjebdjff_Volume0p5" dpkg --configure -ansudo chroot "/mnt/boot-sav/mapper/isw_becjebdjff_Volume0p5" apt-get install -fynsudo chroot "/mnt/boot-sav/mapper/isw_becjebdjff_Volume0p5" apt-get install -y --force-yes dmraidnsudo chroot "/mnt/boot-sav/mapper/isw_becjebdjff_Volume0p5" dmraid -aynsudo chroot "/mnt/boot-sav/mapper/isw_becjebdjff_Volume0p5" apt-get purge -y --force-yes grub*-common
- Then type: sudo chroot "/mnt/boot-sav/mapper/isw_becjebdjff_Volume0p5" apt-get install -y --force-yes grub-pc
- =================== mapper/isw_becjebdjff_Volume0p5/etc/default/grub :
- # If you change this file, run 'update-grub' afterwards to update
- # /boot/grub/grub.cfg.
- # For full documentation of the options in this file, see:
- # info -f grub -n 'Simple configuration'
- GRUB_DEFAULT=0
- GRUB_HIDDEN_TIMEOUT=0
- GRUB_HIDDEN_TIMEOUT_QUIET=true
- GRUB_TIMEOUT=10
- GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
- GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
- GRUB_CMDLINE_LINUX=""
- # Uncomment to enable BadRAM filtering, modify to suit your needs
- # This works with Linux (no patch required) and with any kernel that obtains
- # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
- #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
- # Uncomment to disable graphical terminal (grub-pc only)
- #GRUB_TERMINAL=console
- # The resolution used on graphical terminal
- # note that you can use only modes which your graphic card supports via VBE
- # you can see them in real GRUB with the command `vbeinfo'
- #GRUB_GFXMODE=640x480
- # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
- #GRUB_DISABLE_LINUX_UUID=true
- # Uncomment to disable generation of recovery mode menu entries
- #GRUB_DISABLE_RECOVERY="true"
- # Uncomment to get a beep at grub start
- #GRUB_INIT_TUNE="480 440 1"
- =================== mapper/isw_becjebdjff_Volume0p5/etc/grub.d/ :
- drwxr-xr-x 2 root root 4096 Dec 23 07:31 grub.d
- drwxr-xr-x 2 root root 4096 Dec 22 20:02 grub.d.bak
- total 52
- -rwxr-xr-x 1 root root 6743 Sep 12 20:19 00_header
- -rwxr-xr-x 1 root root 5522 Sep 12 20:05 05_debian_theme
- -rwxr-xr-x 1 root root 7407 Sep 12 20:19 10_linux
- -rwxr-xr-x 1 root root 6335 Sep 12 20:19 20_linux_xen
- -rwxr-xr-x 1 root root 7603 Sep 12 20:19 30_os-prober
- -rwxr-xr-x 1 root root 214 Sep 12 20:19 40_custom
- -rwxr-xr-x 1 root root 95 Sep 12 20:19 41_custom
- -rw-r--r-- 1 root root 483 Sep 12 20:19 README
- Unhide GRUB boot menu in mapper/isw_becjebdjff_Volume0p5/etc/default/grub
- =================== mapper/isw_becjebdjff_Volume0p5/etc/default/grub :
- # If you change this file, run 'update-grub' afterwards to update
- # /boot/grub/grub.cfg.
- # For full documentation of the options in this file, see:
- # info -f grub -n 'Simple configuration'
- GRUB_DEFAULT=0
- #GRUB_HIDDEN_TIMEOUT=0
- GRUB_HIDDEN_TIMEOUT_QUIET=true
- GRUB_TIMEOUT=10
- GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
- GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
- GRUB_CMDLINE_LINUX=""
- # Uncomment to enable BadRAM filtering, modify to suit your needs
- # This works with Linux (no patch required) and with any kernel that obtains
- # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
- #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
- # Uncomment to disable graphical terminal (grub-pc only)
- #GRUB_TERMINAL=console
- # The resolution used on graphical terminal
- # note that you can use only modes which your graphic card supports via VBE
- # you can see them in real GRUB with the command `vbeinfo'
- #GRUB_GFXMODE=640x480
- # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
- #GRUB_DISABLE_LINUX_UUID=true
- # Uncomment to disable generation of recovery mode menu entries
- #GRUB_DISABLE_RECOVERY="true"
- # Uncomment to get a beep at grub start
- #GRUB_INIT_TUNE="480 440 1"
- =================== mapper/isw_becjebdjff_Volume0p5/etc/grub.d/ :
- drwxr-xr-x 2 root root 4096 Dec 23 07:31 grub.d
- drwxr-xr-x 2 root root 4096 Dec 22 20:02 grub.d.bak
- total 52
- -rwxr-xr-x 1 root root 6743 Sep 12 20:19 00_header
- -rwxr-xr-x 1 root root 5522 Sep 12 20:05 05_debian_theme
- -rwxr-xr-x 1 root root 7407 Sep 12 20:19 10_linux
- -rwxr-xr-x 1 root root 6335 Sep 12 20:19 20_linux_xen
- -rwxr-xr-x 1 root root 7603 Sep 12 20:19 30_os-prober
- -rwxr-xr-x 1 root root 214 Sep 12 20:19 40_custom
- -rwxr-xr-x 1 root root 95 Sep 12 20:19 41_custom
- -rw-r--r-- 1 root root 483 Sep 12 20:19 README
- grub-install (GRUB) 1.99-21ubuntu3.4,grub-install (GRUB) 1.
- Reinstall the GRUB of mapper/isw_becjebdjff_Volume0p5 into the MBR of mapper/isw_becjebdjff_Volume0
- /usr/sbin/grub-setup: warn: Sector 32 is already in use by FlexNet; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track.
- grub-install /dev/mapper/isw_becjebdjff_Volume0: Installation finished. No error reported.
- exit code of grub-install /dev/mapper/isw_becjebdjff_Volume0:0
- FlexNet detected. Please backup your data before this operation. Do you want to continue? yes
- ls: cannot access /sys/block/mapper/isw_becjebdjff_Volume0/: No such file or directory
- dd if=/dev/mapper/isw_becjebdjff_Volume0 of=/var/log/boot-sav/log/2012-12-23__07h28boot-repair23/mapper/isw_becjebdjff_Volume0/before_wiping.img bs=512 count=2047 seek=1
- 2047+0 records in
- 2047+0 records out
- ls: cannot access /sys/block/mapper/isw_becjebdjff_Volume0/: No such file or directory
- Could not backup, wipe cancelled.
- /usr/sbin/grub-setup: warn: Sector 32 is already in use by FlexNet; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track.
- grub-install /dev/mapper/isw_becjebdjff_Volume0: Installation finished. No error reported.
- exit code of grub-install /dev/mapper/isw_becjebdjff_Volume0:0
- chroot /mnt/boot-sav/mapper/isw_becjebdjff_Volume0p5 update-grub
- Generating grub.cfg ...
- Found linux image: /boot/vmlinuz-3.2.0-23-generic
- Found initrd image: /boot/initrd.img-3.2.0-23-generic
- Found Windows Recovery Environment (loader) on /dev/mapper/isw_becjebdjff_Volume0p1
- Found Windows Vista (loader) on /dev/mapper/isw_becjebdjff_Volume0p2
- Unhide GRUB boot menu in mapper/isw_becjebdjff_Volume0p5/boot/grub/grub.cfg
- An error occurred during the repair.
- You can now reboot your computer.
- Please do not forget to make your BIOS boot on mapper/isw_becjebdjff_Volume0 (640GB) disk!