1. [ 0.000000] CPU0 microcode updated early to revision 0x1b, date = 2014-05-29
  2. [ 0.000000] Initializing cgroup subsys cpuset
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Initializing cgroup subsys cpuacct
  5. [ 0.000000] Linux version 3.14.28-1-MANJARO (builduser@phil) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 9 00:09:19 CET 2015
  6. [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-314-x86_64 root=UUID=3161dd63-38c0-44bc-bc1e-34b692209b0b rw acpi_backlight=vendor resume=/dev/sda12 ipv6.disable=1 loglevel=5
  7. [ 0.000000] e820: BIOS-provided physical RAM map:
  8. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
  9. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b891cfff] usable
  10. [ 0.000000] BIOS-e820: [mem 0x00000000b891d000-0x00000000b9d3dfff] reserved
  11. [ 0.000000] BIOS-e820: [mem 0x00000000b9d3e000-0x00000000b9ebdfff] usable
  12. [ 0.000000] BIOS-e820: [mem 0x00000000b9ebe000-0x00000000b9fbdfff] ACPI NVS
  13. [ 0.000000] BIOS-e820: [mem 0x00000000b9fbe000-0x00000000b9ffefff] ACPI data
  14. [ 0.000000] BIOS-e820: [mem 0x00000000b9fff000-0x00000000b9ffffff] usable
  15. [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
  16. [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
  17. [ 0.000000] BIOS-e820: [mem 0x00000000ffec0000-0x00000000ffedefff] reserved
  18. [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bfdfffff] usable
  19. [ 0.000000] NX (Execute Disable) protection: active
  20. [ 0.000000] efi: EFI v2.10 by HPQ
  21. [ 0.000000] efi: ACPI=0xb9ffe000 ACPI 2.0=0xb9ffe014 SMBIOS=0xb93ed618
  22. [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
  23. [ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x0000000000058000) (0MB)
  24. [ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
  25. [ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000059000-0x000000000007d000) (0MB)
  26. [ 0.000000] efi: mem04: type=4, attr=0xf, range=[0x000000000007d000-0x000000000007e000) (0MB)
  27. [ 0.000000] efi: mem05: type=3, attr=0xf, range=[0x000000000007e000-0x00000000000a0000) (0MB)
  28. [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000c00000) (11MB)
  29. [ 0.000000] efi: mem07: type=3, attr=0xf, range=[0x0000000000c00000-0x0000000001000000) (4MB)
  30. [ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f5e000) (15MB)
  31. [ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000001f5e000-0x0000000037888000) (857MB)
  32. [ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x0000000037888000-0x0000000037c3c000) (3MB)
  33. [ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000037c3c000-0x00000000806db000) (1162MB)
  34. [ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x00000000806db000-0x00000000ad01e000) (713MB)
  35. [ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x00000000ad01e000-0x00000000ad03e000) (0MB)
  36. [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000ad03e000-0x00000000ae94e000) (25MB)
  37. [ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000ae94e000-0x00000000b000e000) (22MB)
  38. [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000b000e000-0x00000000b3aa0000) (58MB)
  39. [ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x00000000b3aa0000-0x00000000b3aab000) (0MB)
  40. [ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x00000000b3aab000-0x00000000b3abe000) (0MB)
  41. [ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000b3abe000-0x00000000b3e3e000) (3MB)
  42. [ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000b3e3e000-0x00000000b3e40000) (0MB)
  43. [ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000b3e40000-0x00000000b3e43000) (0MB)
  44. [ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000b3e43000-0x00000000b3e45000) (0MB)
  45. [ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000b3e45000-0x00000000b3e7b000) (0MB)
  46. [ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000b3e7b000-0x00000000b3e7c000) (0MB)
  47. [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000b3e7c000-0x00000000b7f1d000) (64MB)
  48. [ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000b7f1d000-0x00000000b841d000) (5MB)
  49. [ 0.000000] efi: mem27: type=3, attr=0xf, range=[0x00000000b841d000-0x00000000b891d000) (5MB)
  50. [ 0.000000] efi: mem28: type=5, attr=0x800000000000000f, range=[0x00000000b891d000-0x00000000b8ab8000) (1MB)
  51. [ 0.000000] efi: mem29: type=5, attr=0x800000000000000f, range=[0x00000000b8ab8000-0x00000000b9124000) (6MB)
  52. [ 0.000000] efi: mem30: type=6, attr=0x800000000000000f, range=[0x00000000b9124000-0x00000000b93db000) (2MB)
  53. [ 0.000000] efi: mem31: type=6, attr=0x800000000000000f, range=[0x00000000b93db000-0x00000000b953e000) (1MB)
  54. [ 0.000000] efi: mem32: type=0, attr=0xf, range=[0x00000000b953e000-0x00000000b9c07000) (6MB)
  55. [ 0.000000] efi: mem33: type=0, attr=0xf, range=[0x00000000b9c07000-0x00000000b9d3e000) (1MB)
  56. [ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x00000000b9d3e000-0x00000000b9e6d000) (1MB)
  57. [ 0.000000] efi: mem35: type=2, attr=0xf, range=[0x00000000b9e6d000-0x00000000b9e77000) (0MB)
  58. [ 0.000000] efi: mem36: type=1, attr=0xf, range=[0x00000000b9e77000-0x00000000b9ebe000) (0MB)
  59. [ 0.000000] efi: mem37: type=10, attr=0xf, range=[0x00000000b9ebe000-0x00000000b9fb1000) (0MB)
  60. [ 0.000000] efi: mem38: type=10, attr=0xf, range=[0x00000000b9fb1000-0x00000000b9fbe000) (0MB)
  61. [ 0.000000] efi: mem39: type=9, attr=0xf, range=[0x00000000b9fbe000-0x00000000b9fcc000) (0MB)
  62. [ 0.000000] efi: mem40: type=9, attr=0xf, range=[0x00000000b9fcc000-0x00000000b9fff000) (0MB)
  63. [ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x00000000b9fff000-0x00000000ba000000) (0MB)
  64. [ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x0000000100000000-0x00000001bfe00000) (3070MB)
  65. [ 0.000000] efi: mem43: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
  66. [ 0.000000] efi: mem44: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
  67. [ 0.000000] efi: mem45: type=11, attr=0x8000000000000000, range=[0x00000000ffec0000-0x00000000ffedf000) (0MB)
  68. [ 0.000000] SMBIOS 2.7 present.
  69. [ 0.000000] DMI: Hewlett-Packard HP ProBook 4440s/17F3, BIOS 68IRR Ver. F.50 08/04/2014
  70. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  71. [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  72. [ 0.000000] No AGP bridge found
  73. [ 0.000000] e820: last_pfn = 0x1bfe00 max_arch_pfn = 0x400000000
  74. [ 0.000000] MTRR default type: uncachable
  75. [ 0.000000] MTRR fixed ranges enabled:
  76. [ 0.000000] 00000-9FFFF write-back
  77. [ 0.000000] A0000-BFFFF uncachable
  78. [ 0.000000] C0000-FFFFF write-protect
  79. [ 0.000000] MTRR variable ranges enabled:
  80. [ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect
  81. [ 0.000000] 1 base 000000000 mask F80000000 write-back
  82. [ 0.000000] 2 base 080000000 mask FC0000000 write-back
  83. [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
  84. [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
  85. [ 0.000000] 5 base 100000000 mask F80000000 write-back
  86. [ 0.000000] 6 base 180000000 mask FC0000000 write-back
  87. [ 0.000000] 7 base 1BFE00000 mask FFFE00000 uncachable
  88. [ 0.000000] 8 disabled
  89. [ 0.000000] 9 disabled
  90. [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  91. [ 0.000000] e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000
  92. [ 0.000000] Scanning 1 areas for low memory corruption
  93. [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
  94. [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
  95. [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
  96. [ 0.000000] BRK [0x01b3c000, 0x01b3cfff] PGTABLE
  97. [ 0.000000] BRK [0x01b3d000, 0x01b3dfff] PGTABLE
  98. [ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
  99. [ 0.000000] init_memory_mapping: [mem 0x1bfc00000-0x1bfdfffff]
  100. [ 0.000000] [mem 0x1bfc00000-0x1bfdfffff] page 2M
  101. [ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
  102. [ 0.000000] init_memory_mapping: [mem 0x1bc000000-0x1bfbfffff]
  103. [ 0.000000] [mem 0x1bc000000-0x1bfbfffff] page 2M
  104. [ 0.000000] init_memory_mapping: [mem 0x180000000-0x1bbffffff]
  105. [ 0.000000] [mem 0x180000000-0x1bbffffff] page 2M
  106. [ 0.000000] init_memory_mapping: [mem 0x00100000-0xb891cfff]
  107. [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
  108. [ 0.000000] [mem 0x00200000-0xb87fffff] page 2M
  109. [ 0.000000] [mem 0xb8800000-0xb891cfff] page 4k
  110. [ 0.000000] init_memory_mapping: [mem 0xb9d3e000-0xb9ebdfff]
  111. [ 0.000000] [mem 0xb9d3e000-0xb9ebdfff] page 4k
  112. [ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
  113. [ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
  114. [ 0.000000] init_memory_mapping: [mem 0xb9fff000-0xb9ffffff]
  115. [ 0.000000] [mem 0xb9fff000-0xb9ffffff] page 4k
  116. [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
  117. [ 0.000000] [mem 0x100000000-0x17fffffff] page 2M
  118. [ 0.000000] RAMDISK: [mem 0x37888000-0x37c3bfff]
  119. [ 0.000000] ACPI: RSDP 00000000b9ffe014 000024 (v02 HPQOEM)
  120. [ 0.000000] ACPI: XSDT 00000000b9ffe120 00007C (v01 HPQOEM SLIC-MPC 0000000F 01000013)
  121. [ 0.000000] ACPI: FACP 00000000b9ffc000 00010C (v05 HPQOEM 17F3 0000000F HP 00000001)
  122. [ 0.000000] ACPI: DSDT 00000000b9fd5000 02154C (v02 HPQOEM 17F3 00000001 INTL 20110112)
  123. [ 0.000000] ACPI: FACS 00000000b9d33000 000040
  124. [ 0.000000] ACPI: HPET 00000000b9ffb000 000038 (v01 HPQOEM 17F3 00000001 HP 00000001)
  125. [ 0.000000] ACPI: APIC 00000000b9ffa000 0000BC (v01 HPQOEM 17F3 00000001 HP 00000001)
  126. [ 0.000000] ACPI: MCFG 00000000b9ff9000 00003C (v01 HPQOEM 17F3 00000001 HP 00000001)
  127. [ 0.000000] ACPI: ASF! 00000000b9ff8000 0000A5 (v32 HPQOEM 17F3 00000001 HP 00000001)
  128. [ 0.000000] ACPI: SSDT 00000000b9fd2000 0002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112)
  129. [ 0.000000] ACPI: SSDT 00000000b9fd1000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
  130. [ 0.000000] ACPI: FPDT 00000000b9fcf000 000044 (v01 HPQOEM 17F3 00000001 HP 00000001)
  131. [ 0.000000] ACPI: BGRT 00000000b9fce000 000038 (v00 HPQOEM 17F3 00000001 HP 00000001)
  132. [ 0.000000] ACPI: SSDT 00000000b9fcd000 000974 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
  133. [ 0.000000] ACPI: SSDT 00000000b9fcc000 000AAD (v01 PmRef CpuPm 00003000 INTL 20110112)
  134. [ 0.000000] ACPI: Local APIC address 0xfee00000
  135. [ 0.000000] No NUMA configuration found
  136. [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bfdfffff]
  137. [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1bfdfffff]
  138. [ 0.000000] NODE_DATA [mem 0x1bfdf6000-0x1bfdfafff]
  139. [ 0.000000] [ffffea0000000000-ffffea0006ffffff] PMD -> [ffff8801b9400000-ffff8801bf3fffff] on node 0
  140. [ 0.000000] Zone ranges:
  141. [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
  142. [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
  143. [ 0.000000] Normal [mem 0x100000000-0x1bfdfffff]
  144. [ 0.000000] Movable zone start for each node
  145. [ 0.000000] Early memory node ranges
  146. [ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
  147. [ 0.000000] node 0: [mem 0x00100000-0xb891cfff]
  148. [ 0.000000] node 0: [mem 0xb9d3e000-0xb9ebdfff]
  149. [ 0.000000] node 0: [mem 0xb9fff000-0xb9ffffff]
  150. [ 0.000000] node 0: [mem 0x100000000-0x1bfdfffff]
  151. [ 0.000000] On node 0 totalpages: 1542205
  152. [ 0.000000] DMA zone: 64 pages used for memmap
  153. [ 0.000000] DMA zone: 1051 pages reserved
  154. [ 0.000000] DMA zone: 3999 pages, LIFO batch:0
  155. [ 0.000000] DMA32 zone: 11755 pages used for memmap
  156. [ 0.000000] DMA32 zone: 752286 pages, LIFO batch:31
  157. [ 0.000000] Normal zone: 12280 pages used for memmap
  158. [ 0.000000] Normal zone: 785920 pages, LIFO batch:31
  159. [ 0.000000] ACPI: PM-Timer IO Port: 0x408
  160. [ 0.000000] ACPI: Local APIC address 0xfee00000
  161. [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  162. [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  163. [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
  164. [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
  165. [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
  166. [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
  167. [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
  168. [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
  169. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  170. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  171. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
  172. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
  173. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
  174. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
  175. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
  176. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
  177. [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
  178. [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
  179. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  180. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  181. [ 0.000000] ACPI: IRQ0 used by override.
  182. [ 0.000000] ACPI: IRQ2 used by override.
  183. [ 0.000000] ACPI: IRQ9 used by override.
  184. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  185. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  186. [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
  187. [ 0.000000] nr_irqs_gsi: 40
  188. [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
  189. [ 0.000000] PM: Registered nosave memory: [mem 0xb891d000-0xb9d3dfff]
  190. [ 0.000000] PM: Registered nosave memory: [mem 0xb9ebe000-0xb9fbdfff]
  191. [ 0.000000] PM: Registered nosave memory: [mem 0xb9fbe000-0xb9ffefff]
  192. [ 0.000000] PM: Registered nosave memory: [mem 0xba000000-0xbb1fffff]
  193. [ 0.000000] PM: Registered nosave memory: [mem 0xbb200000-0xbf1fffff]
  194. [ 0.000000] PM: Registered nosave memory: [mem 0xbf200000-0xe00f7fff]
  195. [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
  196. [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
  197. [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
  198. [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffebffff]
  199. [ 0.000000] PM: Registered nosave memory: [mem 0xffec0000-0xffedefff]
  200. [ 0.000000] PM: Registered nosave memory: [mem 0xffedf000-0xffffffff]
  201. [ 0.000000] e820: [mem 0xbf200000-0xe00f7fff] available for PCI devices
  202. [ 0.000000] Booting paravirtualized kernel on bare hardware
  203. [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
  204. [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801bfa00000 s83008 r8192 d23488 u262144
  205. [ 0.000000] pcpu-alloc: s83008 r8192 d23488 u262144 alloc=1*2097152
  206. [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
  207. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1517055
  208. [ 0.000000] Policy zone: Normal
  209. [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-314-x86_64 root=UUID=3161dd63-38c0-44bc-bc1e-34b692209b0b rw acpi_backlight=vendor resume=/dev/sda12 ipv6.disable=1 loglevel=5
  210. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  211. [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
  212. [ 0.000000] Checking aperture...
  213. [ 0.000000] No AGP bridge found
  214. [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
  215. [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  216. [ 0.000000] Memory: 5885168K/6168820K available (5140K kernel code, 862K rwdata, 1648K rodata, 1116K init, 1300K bss, 283652K reserved)
  217. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  218. [ 0.000000] Preemptible hierarchical RCU implementation.
  219. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  220. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
  221. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
  222. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
  223. [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
  224. [ 0.000000] Console: colour dummy device 80x25
  225. [ 0.000000] console [tty0] enabled
  226. [ 0.000000] allocated 25165824 bytes of page_cgroup
  227. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  228. [ 0.000000] hpet clockevent registered
  229. [ 0.000000] tsc: Fast TSC calibration using PIT
  230. [ 0.000000] tsc: Detected 2494.396 MHz processor
  231. [ 0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.65 BogoMIPS (lpj=8314653)
  232. [ 0.000037] pid_max: default: 32768 minimum: 301
  233. [ 0.000043] ACPI: Core revision 20131218
  234. [ 0.006511] ACPI: All ACPI Tables successfully acquired
  235. [ 0.077222] Security Framework initialized
  236. [ 0.077228] Yama: becoming mindful.
  237. [ 0.077680] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  238. [ 0.079644] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  239. [ 0.080539] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
  240. [ 0.080548] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
  241. [ 0.080734] Initializing cgroup subsys memory
  242. [ 0.080738] Initializing cgroup subsys devices
  243. [ 0.080740] Initializing cgroup subsys freezer
  244. [ 0.080741] Initializing cgroup subsys net_cls
  245. [ 0.080742] Initializing cgroup subsys blkio
  246. [ 0.080744] Initializing cgroup subsys bfqio
  247. [ 0.080767] CPU: Physical Processor ID: 0
  248. [ 0.080768] CPU: Processor Core ID: 0
  249. [ 0.080772] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
  250. ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
  251. [ 0.081134] mce: CPU supports 7 MCE banks
  252. [ 0.081145] CPU0: Thermal monitoring enabled (TM1)
  253. [ 0.081154] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
  254. Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
  255. tlb_flushall_shift: 2
  256. [ 0.081253] Freeing SMP alternatives memory: 20K (ffffffff819f0000 - ffffffff819f5000)
  257. [ 0.084854] ftrace: allocating 20216 entries in 79 pages
  258. [ 0.094556] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  259. [ 0.127599] smpboot: CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (fam: 06, model: 3a, stepping: 09)
  260. [ 0.127607] TSC deadline timer enabled
  261. [ 0.127617] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
  262. [ 0.127636] ... version: 3
  263. [ 0.127637] ... bit width: 48
  264. [ 0.127638] ... generic registers: 4
  265. [ 0.127639] ... value mask: 0000ffffffffffff
  266. [ 0.127640] ... max period: 0000ffffffffffff
  267. [ 0.127641] ... fixed-purpose events: 3
  268. [ 0.127641] ... event mask: 000000070000000f
  269. [ 0.154407] x86: Booting SMP configuration:
  270. [ 0.154409] .... node #0, CPUs: #1
  271. [ 0.168135] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  272. [ 0.174805] #2
  273. [ 0.185500] CPU2 microcode updated early to revision 0x1b, date = 2014-05-29
  274. [ 0.195097] #3
  275. [ 0.208659] x86: Booted up 1 node, 4 CPUs
  276. [ 0.208662] smpboot: Total of 4 processors activated (19963.63 BogoMIPS)
  277. [ 0.211928] devtmpfs: initialized
  278. [ 0.214253] PM: Registering ACPI NVS region [mem 0xb9ebe000-0xb9fbdfff] (1048576 bytes)
  279. [ 0.214970] pinctrl core: initialized pinctrl subsystem
  280. [ 0.215005] RTC time: 6:27:49, date: 01/15/15
  281. [ 0.215035] NET: Registered protocol family 16
  282. [ 0.215112] cpuidle: using governor ladder
  283. [ 0.215113] cpuidle: using governor menu
  284. [ 0.215129] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
  285. [ 0.215131] ACPI: bus type PCI registered
  286. [ 0.215132] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  287. [ 0.215192] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  288. [ 0.215194] PCI: not using MMCONFIG
  289. [ 0.215195] PCI: Using configuration type 1 for base access
  290. [ 0.215794] bio: create slab <bio-0> at 0
  291. [ 0.215888] ACPI: Added _OSI(Module Device)
  292. [ 0.215889] ACPI: Added _OSI(Processor Device)
  293. [ 0.215890] ACPI: Added _OSI(3.0 _SCP Extensions)
  294. [ 0.215891] ACPI: Added _OSI(Processor Aggregator Device)
  295. [ 0.219278] ACPI: Executed 1 blocks of module-level executable AML code
  296. [ 0.235387] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
  297. [ 0.292715] ACPI: SSDT 00000000b9d31018 000861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
  298. [ 0.293109] ACPI: Dynamic OEM Table Load:
  299. [ 0.293112] ACPI: SSDT (null) 000861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
  300. [ 0.305691] ACPI: SSDT 00000000b9d32a98 000303 (v01 PmRef ApIst 00003000 INTL 20110112)
  301. [ 0.306106] ACPI: Dynamic OEM Table Load:
  302. [ 0.306109] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20110112)
  303. [ 0.318939] ACPI: SSDT 00000000b9d30d98 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
  304. [ 0.319330] ACPI: Dynamic OEM Table Load:
  305. [ 0.319333] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
  306. [ 1.903075] ACPI: Interpreter enabled
  307. [ 1.903083] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
  308. [ 1.903090] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
  309. [ 1.903105] ACPI: (supports S0 S3 S4 S5)
  310. [ 1.903106] ACPI: Using IOAPIC for interrupt routing
  311. [ 1.903119] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  312. [ 1.903407] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
  313. [ 1.903698] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  314. [ 1.903839] ACPI: No dock devices found.
  315. [ 1.904968] ACPI: Power Resource [APPR] (off)
  316. [ 1.918613] ACPI: Power Resource [COMP] (on)
  317. [ 1.918801] ACPI: Power Resource [LPP] (on)
  318. [ 1.922167] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
  319. [ 1.922173] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  320. [ 1.923474] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
  321. [ 1.924060] PCI host bridge to bus 0000:00
  322. [ 1.924062] pci_bus 0000:00: root bus resource [bus 00-3e]
  323. [ 1.924064] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
  324. [ 1.924066] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
  325. [ 1.924067] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
  326. [ 1.924069] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff]
  327. [ 1.924070] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
  328. [ 1.924071] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
  329. [ 1.924078] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
  330. [ 1.924153] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
  331. [ 1.924164] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
  332. [ 1.924170] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
  333. [ 1.924175] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
  334. [ 1.924265] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
  335. [ 1.924285] pci 0000:00:14.0: reg 0x10: [mem 0xd0700000-0xd070ffff 64bit]
  336. [ 1.924347] pci 0000:00:14.0: PME# supported from D3hot D3cold
  337. [ 1.924379] pci 0000:00:14.0: System wakeup disabled by ACPI
  338. [ 1.924418] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
  339. [ 1.924442] pci 0000:00:16.0: reg 0x10: [mem 0xd0714000-0xd071400f 64bit]
  340. [ 1.924518] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
  341. [ 1.924598] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
  342. [ 1.924618] pci 0000:00:1a.0: reg 0x10: [mem 0xd0719000-0xd07193ff]
  343. [ 1.924709] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
  344. [ 1.924745] pci 0000:00:1a.0: System wakeup disabled by ACPI
  345. [ 1.924786] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
  346. [ 1.924800] pci 0000:00:1b.0: reg 0x10: [mem 0xd0710000-0xd0713fff 64bit]
  347. [ 1.924866] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  348. [ 1.924931] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
  349. [ 1.925004] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  350. [ 1.925071] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
  351. [ 1.925150] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
  352. [ 1.925189] pci 0000:00:1c.2: System wakeup disabled by ACPI
  353. [ 1.925223] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
  354. [ 1.925304] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
  355. [ 1.925340] pci 0000:00:1c.3: System wakeup disabled by ACPI
  356. [ 1.925380] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
  357. [ 1.925401] pci 0000:00:1d.0: reg 0x10: [mem 0xd0718000-0xd07183ff]
  358. [ 1.925491] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
  359. [ 1.925526] pci 0000:00:1d.0: System wakeup disabled by ACPI
  360. [ 1.925562] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
  361. [ 1.925722] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
  362. [ 1.925741] pci 0000:00:1f.2: reg 0x10: [io 0x2068-0x206f]
  363. [ 1.925749] pci 0000:00:1f.2: reg 0x14: [io 0x2074-0x2077]
  364. [ 1.925757] pci 0000:00:1f.2: reg 0x18: [io 0x2060-0x2067]
  365. [ 1.925765] pci 0000:00:1f.2: reg 0x1c: [io 0x2070-0x2073]
  366. [ 1.925773] pci 0000:00:1f.2: reg 0x20: [io 0x2040-0x205f]
  367. [ 1.925782] pci 0000:00:1f.2: reg 0x24: [mem 0xd0717000-0xd07177ff]
  368. [ 1.925827] pci 0000:00:1f.2: PME# supported from D3hot
  369. [ 1.925941] pci 0000:00:1c.0: PCI bridge to [bus 01]
  370. [ 1.925947] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
  371. [ 1.926049] pci 0000:00:1c.2: PCI bridge to [bus 02]
  372. [ 1.926055] pci 0000:00:1c.2: bridge window [mem 0xd0500000-0xd05fffff]
  373. [ 1.926144] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
  374. [ 1.926168] pci 0000:03:00.0: reg 0x10: [mem 0xd0400000-0xd047ffff 64bit]
  375. [ 1.926214] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
  376. [ 1.926299] pci 0000:03:00.0: supports D1 D2
  377. [ 1.926300] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  378. [ 1.926332] pci 0000:03:00.0: System wakeup disabled by ACPI
  379. [ 1.934568] pci 0000:00:1c.3: PCI bridge to [bus 03]
  380. [ 1.934579] pci 0000:00:1c.3: bridge window [mem 0xd0400000-0xd04fffff]
  381. [ 1.934620] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
  382. [ 1.935048] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
  383. [ 1.935089] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  384. [ 1.935131] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  385. [ 1.935169] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  386. [ 1.935207] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  387. [ 1.935245] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  388. [ 1.935284] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  389. [ 1.935322] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  390. [ 1.935451] ACPI: Enabled 5 GPEs in block 00 to 3F
  391. [ 1.935495] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
  392. [ 1.935575] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  393. [ 1.935578] vgaarb: loaded
  394. [ 1.935579] vgaarb: bridge control possible 0000:00:02.0
  395. [ 1.935615] PCI: Using ACPI for IRQ routing
  396. [ 1.942118] PCI: pci_cache_line_size set to 64 bytes
  397. [ 1.942156] e820: reserve RAM buffer [mem 0xb891d000-0xbbffffff]
  398. [ 1.942158] e820: reserve RAM buffer [mem 0xb9ebe000-0xbbffffff]
  399. [ 1.942159] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
  400. [ 1.942160] e820: reserve RAM buffer [mem 0x1bfe00000-0x1bfffffff]
  401. [ 1.942242] NetLabel: Initializing
  402. [ 1.942243] NetLabel: domain hash size = 128
  403. [ 1.942244] NetLabel: protocols = UNLABELED CIPSOv4
  404. [ 1.942254] NetLabel: unlabeled traffic allowed by default
  405. [ 1.942275] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  406. [ 1.942279] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  407. [ 1.944303] Switched to clocksource hpet
  408. [ 1.948619] pnp: PnP ACPI init
  409. [ 1.948633] ACPI: bus type PNP registered
  410. [ 1.948773] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
  411. [ 1.948775] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
  412. [ 1.948777] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
  413. [ 1.948778] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
  414. [ 1.948780] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
  415. [ 1.948782] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
  416. [ 1.948783] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
  417. [ 1.948785] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
  418. [ 1.948786] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
  419. [ 1.948789] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
  420. [ 1.948857] pnp 00:01: [dma 4]
  421. [ 1.948874] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
  422. [ 1.948895] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
  423. [ 1.948940] system 00:03: [io 0xfe00-0xfe0f] has been reserved
  424. [ 1.948942] system 00:03: [io 0xfe80-0xfe8f] has been reserved
  425. [ 1.948945] system 00:03: [mem 0xfed40000-0xfed44fff] has been reserved
  426. [ 1.948947] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
  427. [ 1.949039] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
  428. [ 1.949070] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
  429. [ 1.949103] system 00:06: [io 0x0200-0x027f] has been reserved
  430. [ 1.949105] system 00:06: [io 0x1000-0x100f] has been reserved
  431. [ 1.949106] system 00:06: [io 0xffff] has been reserved
  432. [ 1.949108] system 00:06: [io 0xffff] has been reserved
  433. [ 1.949110] system 00:06: [io 0x0400-0x047f] could not be reserved
  434. [ 1.949111] system 00:06: [io 0x0500-0x057f] has been reserved
  435. [ 1.949113] system 00:06: [io 0xef80-0xef9f] has been reserved
  436. [ 1.949115] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
  437. [ 1.949140] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
  438. [ 1.949242] pnp 00:08: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
  439. [ 1.949267] pnp 00:09: Plug and Play ACPI device, IDs SYN0196 SYN0100 SYN0002 PNP0f13 (active)
  440. [ 1.949454] pnp 00:0a: Plug and Play ACPI device, IDs HPQ6000 (active)
  441. [ 1.949507] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved
  442. [ 1.949509] system 00:0b: [mem 0x40004000-0x40004fff] could not be reserved
  443. [ 1.949511] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
  444. [ 1.949652] pnp: PnP ACPI: found 12 devices
  445. [ 1.949653] ACPI: bus type PNP unregistered
  446. [ 1.956150] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
  447. [ 1.956180] pci 0000:00:1c.3: BAR 15: assigned [mem 0xbf200000-0xbf2fffff pref]
  448. [ 1.956182] pci 0000:00:1c.0: PCI bridge to [bus 01]
  449. [ 1.956188] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
  450. [ 1.956196] pci 0000:00:1c.2: PCI bridge to [bus 02]
  451. [ 1.956201] pci 0000:00:1c.2: bridge window [mem 0xd0500000-0xd05fffff]
  452. [ 1.956210] pci 0000:03:00.0: BAR 6: assigned [mem 0xbf200000-0xbf20ffff pref]
  453. [ 1.956212] pci 0000:00:1c.3: PCI bridge to [bus 03]
  454. [ 1.956217] pci 0000:00:1c.3: bridge window [mem 0xd0400000-0xd04fffff]
  455. [ 1.956221] pci 0000:00:1c.3: bridge window [mem 0xbf200000-0xbf2fffff pref]
  456. [ 1.956228] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
  457. [ 1.956230] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
  458. [ 1.956231] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  459. [ 1.956233] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff]
  460. [ 1.956234] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
  461. [ 1.956236] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
  462. [ 1.956237] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]
  463. [ 1.956239] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
  464. [ 1.956240] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
  465. [ 1.956242] pci_bus 0000:03: resource 2 [mem 0xbf200000-0xbf2fffff pref]
  466. [ 1.956268] NET: Registered protocol family 2
  467. [ 1.956449] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  468. [ 1.956589] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  469. [ 1.956708] TCP: Hash tables configured (established 65536 bind 65536)
  470. [ 1.956724] TCP: reno registered
  471. [ 1.956734] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  472. [ 1.956759] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  473. [ 1.956821] NET: Registered protocol family 1
  474. [ 1.956830] pci 0000:00:02.0: Boot video device
  475. [ 1.956838] pci 0000:00:14.0: enabling device (0000 -> 0002)
  476. [ 1.956938] pci 0000:00:14.0: can't derive routing for PCI INT A
  477. [ 1.956943] pci 0000:00:14.0: PCI INT A: no GSI
  478. [ 1.957061] pci 0000:00:14.0: can't derive routing for PCI INT A
  479. [ 1.957453] PCI: CLS 64 bytes, default 64
  480. [ 1.957489] Unpacking initramfs...
  481. [ 2.007986] Freeing initrd memory: 3792K (ffff880037888000 - ffff880037c3c000)
  482. [ 2.007990] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  483. [ 2.007992] software IO TLB [mem 0xa901e000-0xad01e000] (64MB) mapped at [ffff8800a901e000-ffff8800ad01dfff]
  484. [ 2.008192] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1b
  485. [ 2.008200] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1b
  486. [ 2.008207] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1b
  487. [ 2.008211] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1b
  488. [ 2.008259] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
  489. [ 2.008272] Scanning for low memory corruption every 60 seconds
  490. [ 2.008506] futex hash table entries: 2048 (order: 5, 131072 bytes)
  491. [ 2.020355] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  492. [ 2.021438] zbud: loaded
  493. [ 2.021572] VFS: Disk quotas dquot_6.5.2
  494. [ 2.021608] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  495. [ 2.021720] msgmni has been set to 11702
  496. [ 2.021765] Key type big_key registered
  497. [ 2.021895] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  498. [ 2.021936] io scheduler noop registered
  499. [ 2.021937] io scheduler deadline registered
  500. [ 2.021963] io scheduler cfq registered
  501. [ 2.021985] io scheduler bfq registered (default)
  502. [ 2.021986] BFQ I/O-scheduler version: v7r6
  503. [ 2.022029] pcieport 0000:00:1c.0: enabling device (0000 -> 0002)
  504. [ 2.022183] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
  505. [ 2.022361] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
  506. [ 2.022530] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
  507. [ 2.022616] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
  508. [ 2.022621] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
  509. [ 2.022638] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
  510. [ 2.022643] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
  511. [ 2.022661] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
  512. [ 2.022662] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
  513. [ 2.022667] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
  514. [ 2.022676] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  515. [ 2.022688] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  516. [ 2.022713] efifb: probing for efifb
  517. [ 2.022726] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010f00000, using 3072k, total 3072k
  518. [ 2.022727] efifb: mode is 1024x768x32, linelength=4096, pages=1
  519. [ 2.022728] efifb: scrolling: redraw
  520. [ 2.022729] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  521. [ 2.024505] Console: switching to colour frame buffer device 128x48
  522. [ 2.026200] fb0: EFI VGA frame buffer device
  523. [ 2.026206] intel_idle: MWAIT substates: 0x21120
  524. [ 2.026207] intel_idle: v0.4 model 0x3A
  525. [ 2.026208] intel_idle: lapic_timer_reliable_states 0xffffffff
  526. [ 2.026361] GHES: HEST is not enabled!
  527. [ 2.026403] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  528. [ 2.026798] Linux agpgart interface v0.103
  529. [ 2.026834] rtc_cmos 00:07: RTC can wake from S4
  530. [ 2.026954] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
  531. [ 2.026982] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  532. [ 2.026991] Intel P-state driver initializing.
  533. [ 2.026999] Intel pstate controlling: cpu 0
  534. [ 2.027015] Intel pstate controlling: cpu 1
  535. [ 2.027031] Intel pstate controlling: cpu 2
  536. [ 2.027045] Intel pstate controlling: cpu 3
  537. [ 2.027066] ledtrig-cpu: registered to indicate activity on CPUs
  538. [ 2.027179] TCP: cubic registered
  539. [ 2.027180] IPv6: Loaded, but administratively disabled, reboot required to enable
  540. [ 2.027182] NET: Registered protocol family 17
  541. [ 2.027396] registered taskstats version 1
  542. [ 2.027700] Magic number: 15:654:468
  543. [ 2.027781] rtc_cmos 00:07: setting system clock to 2015-01-15 06:27:51 UTC (1421303271)
  544. [ 2.027846] PM: Checking hibernation image partition /dev/sda12
  545. [ 2.027851] PM: Hibernation image not present or could not be loaded.
  546. [ 2.029189] Freeing unused kernel memory: 1116K (ffffffff818d9000 - ffffffff819f0000)
  547. [ 2.029191] Write protecting the kernel read-only data: 8192k
  548. [ 2.033627] Freeing unused kernel memory: 992K (ffff880001508000 - ffff880001600000)
  549. [ 2.035211] Freeing unused kernel memory: 400K (ffff88000179c000 - ffff880001800000)
  550. [ 2.041031] udevd[53]: starting version 2.1.1
  551. [ 2.041087] random: udevd urandom read with 4 bits of entropy available
  552. [ 2.064780] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  553. [ 2.066554] i8042: Detected active multiplexing controller, rev 1.1
  554. [ 2.067239] serio: i8042 KBD port at 0x60,0x64 irq 1
  555. [ 2.069441] serio: i8042 AUX0 port at 0x60,0x64 irq 12
  556. [ 2.069490] serio: i8042 AUX1 port at 0x60,0x64 irq 12
  557. [ 2.069523] serio: i8042 AUX2 port at 0x60,0x64 irq 12
  558. [ 2.069550] serio: i8042 AUX3 port at 0x60,0x64 irq 12
  559. [ 2.072304] ACPI: bus type USB registered
  560. [ 2.072337] usbcore: registered new interface driver usbfs
  561. [ 2.072349] usbcore: registered new interface driver hub
  562. [ 2.075112] usbcore: registered new device driver usb
  563. [ 2.075637] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  564. [ 2.075802] ehci-pci: EHCI PCI platform driver
  565. [ 2.075962] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
  566. [ 2.076013] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
  567. [ 2.076066] xhci_hcd 0000:00:14.0: xHCI Host Controller
  568. [ 2.076073] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
  569. [ 2.076169] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
  570. [ 2.076192] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
  571. [ 2.077490] hub 1-0:1.0: USB hub found
  572. [ 2.077508] hub 1-0:1.0: 4 ports detected
  573. [ 2.078758] xhci_hcd 0000:00:14.0: xHCI Host Controller
  574. [ 2.078764] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
  575. [ 2.078988] hub 2-0:1.0: USB hub found
  576. [ 2.079001] hub 2-0:1.0: 4 ports detected
  577. [ 2.079770] ehci-pci 0000:00:1a.0: EHCI Host Controller
  578. [ 2.079778] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
  579. [ 2.079792] ehci-pci 0000:00:1a.0: debug port 2
  580. [ 2.080958] SCSI subsystem initialized
  581. [ 2.081998] libata version 3.00 loaded.
  582. [ 2.083706] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
  583. [ 2.083728] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd0719000
  584. [ 2.091187] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  585. [ 2.091867] hub 3-0:1.0: USB hub found
  586. [ 2.091880] hub 3-0:1.0: 2 ports detected
  587. [ 2.092233] ehci-pci 0000:00:1d.0: EHCI Host Controller
  588. [ 2.092241] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
  589. [ 2.092257] ehci-pci 0000:00:1d.0: debug port 2
  590. [ 2.096171] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
  591. [ 2.096178] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd0718000
  592. [ 2.104537] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  593. [ 2.104852] hub 4-0:1.0: USB hub found
  594. [ 2.104858] hub 4-0:1.0: 2 ports detected
  595. [ 2.105013] ahci 0000:00:1f.2: version 3.0
  596. [ 2.105223] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
  597. [ 2.105245] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
  598. [ 2.105272] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
  599. [ 2.105274] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
  600. [ 2.111710] scsi0 : ahci
  601. [ 2.111824] scsi1 : ahci
  602. [ 2.111923] scsi2 : ahci
  603. [ 2.112020] scsi3 : ahci
  604. [ 2.112116] scsi4 : ahci
  605. [ 2.112210] scsi5 : ahci
  606. [ 2.112246] ata1: SATA max UDMA/133 abar m2048@0xd0717000 port 0xd0717100 irq 44
  607. [ 2.112249] ata2: SATA max UDMA/133 abar m2048@0xd0717000 port 0xd0717180 irq 44
  608. [ 2.112250] ata3: DUMMY
  609. [ 2.112250] ata4: DUMMY
  610. [ 2.112251] ata5: DUMMY
  611. [ 2.112252] ata6: DUMMY
  612. [ 2.119601] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  613. [ 2.398305] usb 3-1: new high-speed USB device number 2 using ehci-pci
  614. [ 2.431612] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  615. [ 2.437973] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
  616. [ 2.438065] ata1.00: ATA-9: ST750LM022 HN-M750MBB, 2AR10002, max UDMA/133
  617. [ 2.438069] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  618. [ 2.444504] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
  619. [ 2.444598] ata1.00: configured for UDMA/133
  620. [ 2.448587] scsi 0:0:0:0: Direct-Access ATA ST750LM022 HN-M7 2AR1 PQ: 0 ANSI: 5
  621. [ 2.522499] hub 3-1:1.0: USB hub found
  622. [ 2.522708] hub 3-1:1.0: 6 ports detected
  623. [ 2.628524] usb 4-1: new high-speed USB device number 2 using ehci-pci
  624. [ 2.752778] hub 4-1:1.0: USB hub found
  625. [ 2.752941] hub 4-1:1.0: 6 ports detected
  626. [ 2.768645] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  627. [ 2.772144] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
  628. [ 2.772153] ata2.00: ATAPI: hp DVD A DS8A8SH, KH63, max UDMA/100
  629. [ 2.778657] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
  630. [ 2.778669] ata2.00: configured for UDMA/100
  631. [ 2.790888] scsi 1:0:0:0: CD-ROM hp DVD A DS8A8SH KH63 PQ: 0 ANSI: 5
  632. [ 2.799498] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
  633. [ 2.799505] sd 0:0:0:0: [sda] 4096-byte physical blocks
  634. [ 2.799697] sd 0:0:0:0: [sda] Write Protect is off
  635. [ 2.799704] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  636. [ 2.799834] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  637. [ 2.814186] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  638. [ 2.814250] cdrom: Uniform CD-ROM driver Revision: 3.20
  639. [ 2.814551] sr 1:0:0:0: Attached scsi CD-ROM sr0
  640. [ 2.832165] usb 3-1.3: new high-speed USB device number 3 using ehci-pci
  641. [ 2.856872] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12
  642. [ 2.858320] sd 0:0:0:0: [sda] Attached SCSI disk
  643. [ 3.012263] tsc: Refined TSC clocksource calibration: 2494.333 MHz
  644. [ 3.035774] usb 4-1.6: new full-speed USB device number 3 using ehci-pci
  645. [ 4.013523] Switched to clocksource tsc
  646. [ 4.126527] random: nonblocking pool is initialized
  647. [ 4.669331] PM: Starting manual resume from disk
  648. [ 4.669338] PM: Hibernation image partition 8:12 present
  649. [ 4.669341] PM: Looking for hibernation image.
  650. [ 4.669625] PM: Image signature found, resuming
  651. [ 4.673386] PM: Preparing processes for restore.
  652. [ 4.673391] Freezing user space processes ... (elapsed 0.000 seconds) done.
  653. [ 4.674184] PM: Loading hibernation image.
  654. [ 4.674269] PM: Marking nosave pages: [mem 0x000a0000-0x000fffff]
  655. [ 4.674274] PM: Marking nosave pages: [mem 0xb891d000-0xb9d3dfff]
  656. [ 4.674390] PM: Marking nosave pages: [mem 0xb9ebe000-0xb9ffefff]
  657. [ 4.674399] PM: Marking nosave pages: [mem 0xba000000-0xffffffff]
  658. [ 4.675882] PM: Basic memory bitmaps created
  659. [ 8.568859] PM: Using 3 thread(s) for decompression.
  660. PM: Loading and decompressing image data (551718 pages)...
  661. [ 8.568866] PM: Image mismatch: memory size
  662. [ 8.568907] PM: Read 2206872 kbytes in 0.01 seconds (220687.20 MB/s)
  663. [ 8.570580] PM: Error -1 resuming
  664. [ 8.570627] PM: Failed to load hibernation image, recovering.
  665. [ 8.606965] PM: Basic memory bitmaps freed
  666. [ 8.606968] Restarting tasks ... done.
  667. [ 8.608598] PM: Hibernation image not present or could not be loaded.
  668. [ 12.776049] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
  669. [ 16.964730] udevd[438]: starting version 2.1.1
  670. [ 18.196715] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  671. [ 18.312680] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
  672. [ 18.312910] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
  673. [ 18.332508] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input9
  674. [ 18.332514] ACPI: Sleep Button [SLPB]
  675. [ 18.332574] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input10
  676. [ 18.332616] ACPI: Lid Switch [LID]
  677. [ 18.332674] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
  678. [ 18.332677] ACPI: Power Button [PWRF]
  679. [ 18.421586] ACPI: Battery Slot [BAT0] (battery present)
  680. [ 18.452140] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20131218/utaddress-258)
  681. [ 18.452150] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  682. [ 18.452156] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
  683. [ 18.452161] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  684. [ 18.452163] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
  685. [ 18.452168] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  686. [ 18.452170] lpc_ich: Resource conflict(s) found affecting gpio_ich
  687. [ 18.457200] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
  688. [ 18.463512] ACPI: AC Adapter [AC] (on-line)
  689. [ 18.493177] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
  690. [ 18.526348] thermal LNXTHERM:00: registered as thermal_zone0
  691. [ 18.526351] ACPI: Thermal Zone [CPUZ] (28 C)
  692. [ 18.576278] thermal LNXTHERM:01: registered as thermal_zone1
  693. [ 18.576282] ACPI: Thermal Zone [GFXZ] (0 C)
  694. [ 18.586608] [drm] Initialized drm 1.1.0 20060810
  695. [ 18.611745] thermal LNXTHERM:02: registered as thermal_zone2
  696. [ 18.611750] ACPI: Thermal Zone [EXTZ] (17 C)
  697. [ 18.619274] Initializing HPQ6001 module
  698. [ 18.619353] input: HP Wireless hotkeys as /devices/virtual/input/input13
  699. [ 18.630745] wmi: Mapper loaded
  700. [ 18.647568] thermal LNXTHERM:03: registered as thermal_zone3
  701. [ 18.647572] ACPI: Thermal Zone [LOCZ] (17 C)
  702. [ 18.688344] thermal LNXTHERM:04: registered as thermal_zone4
  703. [ 18.688348] ACPI: Thermal Zone [BATZ] (20 C)
  704. [ 18.688762] thermal LNXTHERM:05: registered as thermal_zone5
  705. [ 18.688764] ACPI: Thermal Zone [PCHZ] (127 C)
  706. [ 18.690842] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
  707. [ 18.690912] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
  708. [ 18.690981] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
  709. [ 18.840635] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00473/0x640000/0xa2400, board id: 1398, fw id: 958908
  710. [ 18.886703] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
  711. [ 18.955620] AVX version of gcm_enc/dec engaged.
  712. [ 19.054417] ppdev: user-space parallel port driver
  713. [ 19.119084] iTCO_vendor_support: vendor-support=0
  714. [ 19.140861] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
  715. [ 19.140900] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
  716. [ 19.141053] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  717. [ 19.197573] mousedev: PS/2 mouse device common for all mice
  718. [ 20.359570] cfg80211: Calling CRDA to update world regulatory domain
  719. [ 21.041918] [drm] Memory usable by graphics device = 2048M
  720. [ 21.041924] checking generic (c0000000 300000) vs hw (c0000000 10000000)
  721. [ 21.041926] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
  722. [ 21.041959] Console: switching to colour dummy device 80x25
  723. [ 21.059540] i915 0000:00:02.0: irq 47 for MSI/MSI-X
  724. [ 21.059551] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  725. [ 21.059553] [drm] Driver supports precise vblank timestamp query.
  726. [ 21.059651] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  727. [ 21.101060] fbcon: inteldrmfb (fb0) is primary device
  728. [ 21.294855] intel_rapl: domain uncore energy ctr 1251979:1251979 not working, skip
  729. [ 21.833750] Console: switching to colour frame buffer device 170x48
  730. [ 21.836955] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  731. [ 21.836957] i915 0000:00:02.0: registered panic notifier
  732. [ 21.884555] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
  733. [ 21.884779] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input17
  734. [ 21.884883] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
  735. [ 22.223176] ath9k 0000:03:00.0: enabling device (0000 -> 0002)
  736. [ 22.231027] ath: EEPROM regdomain: 0x60
  737. [ 22.231030] ath: EEPROM indicates we should expect a direct regpair map
  738. [ 22.231034] ath: Country alpha2 being used: 00
  739. [ 22.231035] ath: Regpair used: 0x60
  740. [ 22.251047] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  741. [ 22.251327] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90011380000, irq=19
  742. [ 22.428090] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
  743. [ 22.871370] media: Linux media interface: v0.10
  744. [ 22.878364] Linux video capture interface: v2.00
  745. [ 22.970407] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b370)
  746. [ 23.292655] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input18
  747. [ 23.292817] usbcore: registered new interface driver uvcvideo
  748. [ 23.292821] USB Video Class driver (1.1.1)
  749. [ 23.419052] Bluetooth: Core ver 2.18
  750. [ 23.419079] NET: Registered protocol family 31
  751. [ 23.419082] Bluetooth: HCI device and connection manager initialized
  752. [ 23.419090] Bluetooth: HCI socket layer initialized
  753. [ 23.419093] Bluetooth: L2CAP socket layer initialized
  754. [ 23.419107] Bluetooth: SCO socket layer initialized
  755. [ 23.652958] usbcore: registered new interface driver btusb
  756. [ 23.918932] usbcore: registered new interface driver ath3k
  757. [ 24.139109] usb 4-1.6: USB disconnect, device number 3
  758. [ 24.323287] usb 4-1.6: new full-speed USB device number 4 using ehci-pci
  759. [ 25.372651] Adding 4194300k swap on /dev/sda12. Priority:-1 extents:1 across:4194300k FS
  760. [ 26.840431] EXT4-fs (sda11): recovery complete
  761. [ 26.886162] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
  762. [ 26.928329] REISERFS (device sda6): found reiserfs format "3.6" with standard journal
  763. [ 26.928353] REISERFS (device sda6): using ordered data mode
  764. [ 26.928355] reiserfs: using flush barriers
  765. [ 26.932351] REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
  766. [ 26.932802] REISERFS (device sda6): checking transaction log (sda6)
  767. [ 28.030248] REISERFS (device sda6): replayed 2319 transactions in 1 seconds
  768. [ 28.116932] REISERFS (device sda6): Using r5 hash to sort names
  769. [ 42.232878] ip_tables: (C) 2000-2006 Netfilter Core Team
  770. [ 42.316538] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  771. [ 52.719535] wlan0: authenticate with 0c:d2:b5:0e:ee:2c
  772. [ 52.733733] wlan0: send auth to 0c:d2:b5:0e:ee:2c (try 1/3)
  773. [ 52.736198] wlan0: authenticated
  774. [ 52.739082] wlan0: associate with 0c:d2:b5:0e:ee:2c (try 1/3)
  775. [ 52.743320] wlan0: RX AssocResp from 0c:d2:b5:0e:ee:2c (capab=0x431 status=0 aid=2)
  776. [ 52.743422] wlan0: associated
  777. [ 214.094688] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,commit=0
  778. [ 214.483449] EXT4-fs (sda11): re-mounted. Opts: commit=0

dmesg.log