1. smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-RELEASE-p10 amd64] (local build)
  2. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  3. === START OF INFORMATION SECTION ===
  4. Model Family: Hitachi Deskstar 7K2000
  5. Device Model: Hitachi HDS722020ALA330
  6. Serial Number: JK11A8BFGP7NKF
  7. LU WWN Device Id: 5 000cca 229c9a88f
  8. Firmware Version: JKAOA3MA
  9. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  10. Sector Size: 512 bytes logical/physical
  11. Rotation Rate: 7200 rpm
  12. Form Factor: 3.5 inches
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: ATA8-ACS T13/1699-D revision 4
  15. SATA Version is: SATA 2.6, 3.0 Gb/s
  16. Local Time is: Fri May 18 18:57:31 2018 PDT
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21. General SMART Values:
  22. Offline data collection status: (0x84) Offline data collection activity
  23. was suspended by an interrupting command from host.
  24. Auto Offline Data Collection: Enabled.
  25. Self-test execution status: ( 0) The previous self-test routine completed
  26. without error or no self-test has ever
  27. been run.
  28. Total time to complete Offline
  29. data collection: (23065) seconds.
  30. Offline data collection
  31. capabilities: (0x5b) SMART execute Offline immediate.
  32. Auto Offline data collection on/off support.
  33. Suspend Offline collection upon new
  34. command.
  35. Offline surface scan supported.
  36. Self-test supported.
  37. No Conveyance Self-test supported.
  38. Selective Self-test supported.
  39. SMART capabilities: (0x0003) Saves SMART data before entering
  40. power-saving mode.
  41. Supports SMART auto save timer.
  42. Error logging capability: (0x01) Error logging supported.
  43. General Purpose Logging supported.
  44. Short self-test routine
  45. recommended polling time: ( 1) minutes.
  46. Extended self-test routine
  47. recommended polling time: ( 384) minutes.
  48. SCT capabilities: (0x003d) SCT Status supported.
  49. SCT Error Recovery Control supported.
  50. SCT Feature Control supported.
  51. SCT Data Table supported.
  52. SMART Attributes Data Structure revision number: 16
  53. Vendor Specific SMART Attributes with Thresholds:
  54. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  55. 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
  56. 2 Throughput_Performance 0x0005 132 132 054 Pre-fail Offline - 104
  57. 3 Spin_Up_Time 0x0007 162 162 024 Pre-fail Always - 406 (Average 488)
  58. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 68
  59. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
  60. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  61. 8 Seek_Time_Performance 0x0005 119 119 020 Pre-fail Offline - 36
  62. 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 20214
  63. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  64. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 68
  65. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 116
  66. 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 116
  67. 194 Temperature_Celsius 0x0002 200 200 000 Old_age Always - 30 (Min/Max 17/80)
  68. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  69. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  70. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  71. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
  72. SMART Error Log Version: 0
  73. No Errors Logged
  74. SMART Self-test log structure revision number 1
  75. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  76. # 1 Short offline Completed without error 00% 8416 -
  77. # 2 Short offline Completed without error 00% 8416 -
  78. SMART Selective self-test log data structure revision number 1
  79. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  80. 1 0 0 Not_testing
  81. 2 0 0 Not_testing
  82. 3 0 0 Not_testing
  83. 4 0 0 Not_testing
  84. 5 0 0 Not_testing
  85. Selective self-test flags (0x0):
  86. After scanning selected spans, do NOT read-scan remainder of disk.
  87. If Selective self-test is pending on power-up, resume after 0 minute delay.
  88. smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-RELEASE-p10 amd64] (local build)
  89. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  90. === START OF INFORMATION SECTION ===
  91. Model Family: Hitachi Deskstar 7K2000
  92. Device Model: Hitachi HDS722020ALA330
  93. Serial Number: JK11A8B9K5UAAF
  94. LU WWN Device Id: 5 000cca 222eceb77
  95. Firmware Version: JKAOA3MA
  96. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  97. Sector Size: 512 bytes logical/physical
  98. Rotation Rate: 7200 rpm
  99. Form Factor: 3.5 inches
  100. Device is: In smartctl database [for details use: -P show]
  101. ATA Version is: ATA8-ACS T13/1699-D revision 4
  102. SATA Version is: SATA 2.6, 3.0 Gb/s
  103. Local Time is: Fri May 18 18:55:38 2018 PDT
  104. SMART support is: Available - device has SMART capability.
  105. SMART support is: Enabled
  106. === START OF READ SMART DATA SECTION ===
  107. SMART overall-health self-assessment test result: PASSED
  108. General SMART Values:
  109. Offline data collection status: (0x84) Offline data collection activity
  110. was suspended by an interrupting command from host.
  111. Auto Offline Data Collection: Enabled.
  112. Self-test execution status: ( 0) The previous self-test routine completed
  113. without error or no self-test has ever
  114. been run.
  115. Total time to complete Offline
  116. data collection: (23065) seconds.
  117. Offline data collection
  118. capabilities: (0x5b) SMART execute Offline immediate.
  119. Auto Offline data collection on/off support.
  120. Suspend Offline collection upon new
  121. command.
  122. Offline surface scan supported.
  123. Self-test supported.
  124. No Conveyance Self-test supported.
  125. Selective Self-test supported.
  126. SMART capabilities: (0x0003) Saves SMART data before entering
  127. power-saving mode.
  128. Supports SMART auto save timer.
  129. Error logging capability: (0x01) Error logging supported.
  130. General Purpose Logging supported.
  131. Short self-test routine
  132. recommended polling time: ( 1) minutes.
  133. Extended self-test routine
  134. recommended polling time: ( 384) minutes.
  135. SCT capabilities: (0x003d) SCT Status supported.
  136. SCT Error Recovery Control supported.
  137. SCT Feature Control supported.
  138. SCT Data Table supported.
  139. SMART Attributes Data Structure revision number: 16
  140. Vendor Specific SMART Attributes with Thresholds:
  141. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  142. 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
  143. 2 Throughput_Performance 0x0005 133 133 054 Pre-fail Offline - 100
  144. 3 Spin_Up_Time 0x0007 151 151 024 Pre-fail Always - 505 (Average 450)
  145. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 75
  146. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 11
  147. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  148. 8 Seek_Time_Performance 0x0005 116 116 020 Pre-fail Offline - 37
  149. 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 20288
  150. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  151. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 75
  152. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 121
  153. 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 121
  154. 194 Temperature_Celsius 0x0002 193 193 000 Old_age Always - 31 (Min/Max 17/87)
  155. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 12
  156. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  157. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  158. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
  159. SMART Error Log Version: 0
  160. No Errors Logged
  161. SMART Self-test log structure revision number 1
  162. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  163. # 1 Short offline Completed without error 00% 8490 -
  164. # 2 Short offline Completed without error 00% 8490 -
  165. SMART Selective self-test log data structure revision number 1
  166. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  167. 1 0 0 Not_testing
  168. 2 0 0 Not_testing
  169. 3 0 0 Not_testing
  170. 4 0 0 Not_testing
  171. 5 0 0 Not_testing
  172. Selective self-test flags (0x0):
  173. After scanning selected spans, do NOT read-scan remainder of disk.
  174. If Selective self-test is pending on power-up, resume after 0 minute delay.
  175. smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-RELEASE-p10 amd64] (local build)
  176. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  177. === START OF INFORMATION SECTION ===
  178. Model Family: Hitachi Deskstar 7K2000
  179. Device Model: Hitachi HDS722020ALA330
  180. Serial Number: JK1151YAHUW17Z
  181. LU WWN Device Id: 5 000cca 221d9da49
  182. Firmware Version: JKAOA3MA
  183. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  184. Sector Size: 512 bytes logical/physical
  185. Rotation Rate: 7200 rpm
  186. Form Factor: 3.5 inches
  187. Device is: In smartctl database [for details use: -P show]
  188. ATA Version is: ATA8-ACS T13/1699-D revision 4
  189. SATA Version is: SATA 2.6, 3.0 Gb/s
  190. Local Time is: Fri May 18 18:58:14 2018 PDT
  191. SMART support is: Available - device has SMART capability.
  192. SMART support is: Enabled
  193. === START OF READ SMART DATA SECTION ===
  194. SMART overall-health self-assessment test result: PASSED
  195. General SMART Values:
  196. Offline data collection status: (0x84) Offline data collection activity
  197. was suspended by an interrupting command from host.
  198. Auto Offline Data Collection: Enabled.
  199. Self-test execution status: ( 0) The previous self-test routine completed
  200. without error or no self-test has ever
  201. been run.
  202. Total time to complete Offline
  203. data collection: (22183) seconds.
  204. Offline data collection
  205. capabilities: (0x5b) SMART execute Offline immediate.
  206. Auto Offline data collection on/off support.
  207. Suspend Offline collection upon new
  208. command.
  209. Offline surface scan supported.
  210. Self-test supported.
  211. No Conveyance Self-test supported.
  212. Selective Self-test supported.
  213. SMART capabilities: (0x0003) Saves SMART data before entering
  214. power-saving mode.
  215. Supports SMART auto save timer.
  216. Error logging capability: (0x01) Error logging supported.
  217. General Purpose Logging supported.
  218. Short self-test routine
  219. recommended polling time: ( 1) minutes.
  220. Extended self-test routine
  221. recommended polling time: ( 370) minutes.
  222. SCT capabilities: (0x003d) SCT Status supported.
  223. SCT Error Recovery Control supported.
  224. SCT Feature Control supported.
  225. SCT Data Table supported.
  226. SMART Attributes Data Structure revision number: 16
  227. Vendor Specific SMART Attributes with Thresholds:
  228. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  229. 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
  230. 2 Throughput_Performance 0x0005 132 132 054 Pre-fail Offline - 106
  231. 3 Spin_Up_Time 0x0007 158 158 024 Pre-fail Always - 451 (Average 463)
  232. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 77
  233. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 2
  234. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  235. 8 Seek_Time_Performance 0x0005 119 119 020 Pre-fail Offline - 36
  236. 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 20226
  237. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  238. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 74
  239. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 125
  240. 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 125
  241. 194 Temperature_Celsius 0x0002 193 193 000 Old_age Always - 31 (Min/Max 18/87)
  242. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 2
  243. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  244. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  245. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
  246. SMART Error Log Version: 0
  247. No Errors Logged
  248. SMART Self-test log structure revision number 1
  249. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  250. # 1 Short offline Completed without error 00% 8426 -
  251. # 2 Short offline Completed without error 00% 8425 -
  252. SMART Selective self-test log data structure revision number 1
  253. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  254. 1 0 0 Not_testing
  255. 2 0 0 Not_testing
  256. 3 0 0 Not_testing
  257. 4 0 0 Not_testing
  258. 5 0 0 Not_testing
  259. Selective self-test flags (0x0):
  260. After scanning selected spans, do NOT read-scan remainder of disk.
  261. If Selective self-test is pending on power-up, resume after 0 minute delay.
  262. smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-RELEASE-p10 amd64] (local build)
  263. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  264. === START OF INFORMATION SECTION ===
  265. Model Family: Hitachi Deskstar 7K2000
  266. Device Model: Hitachi HDS722020ALA330
  267. Serial Number: JK11A8B9HSRE5F
  268. LU WWN Device Id: 5 000cca 222d8e038
  269. Firmware Version: JKAOA3MA
  270. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  271. Sector Size: 512 bytes logical/physical
  272. Rotation Rate: 7200 rpm
  273. Form Factor: 3.5 inches
  274. Device is: In smartctl database [for details use: -P show]
  275. ATA Version is: ATA8-ACS T13/1699-D revision 4
  276. SATA Version is: SATA 2.6, 3.0 Gb/s
  277. Local Time is: Fri May 18 18:58:48 2018 PDT
  278. SMART support is: Available - device has SMART capability.
  279. SMART support is: Enabled
  280. === START OF READ SMART DATA SECTION ===
  281. SMART overall-health self-assessment test result: PASSED
  282. General SMART Values:
  283. Offline data collection status: (0x84) Offline data collection activity
  284. was suspended by an interrupting command from host.
  285. Auto Offline Data Collection: Enabled.
  286. Self-test execution status: ( 0) The previous self-test routine completed
  287. without error or no self-test has ever
  288. been run.
  289. Total time to complete Offline
  290. data collection: (21889) seconds.
  291. Offline data collection
  292. capabilities: (0x5b) SMART execute Offline immediate.
  293. Auto Offline data collection on/off support.
  294. Suspend Offline collection upon new
  295. command.
  296. Offline surface scan supported.
  297. Self-test supported.
  298. No Conveyance Self-test supported.
  299. Selective Self-test supported.
  300. SMART capabilities: (0x0003) Saves SMART data before entering
  301. power-saving mode.
  302. Supports SMART auto save timer.
  303. Error logging capability: (0x01) Error logging supported.
  304. General Purpose Logging supported.
  305. Short self-test routine
  306. recommended polling time: ( 1) minutes.
  307. Extended self-test routine
  308. recommended polling time: ( 365) minutes.
  309. SCT capabilities: (0x003d) SCT Status supported.
  310. SCT Error Recovery Control supported.
  311. SCT Feature Control supported.
  312. SCT Data Table supported.
  313. SMART Attributes Data Structure revision number: 16
  314. Vendor Specific SMART Attributes with Thresholds:
  315. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  316. 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
  317. 2 Throughput_Performance 0x0005 133 133 054 Pre-fail Offline - 100
  318. 3 Spin_Up_Time 0x0007 160 160 024 Pre-fail Always - 447 (Average 455)
  319. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 72
  320. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 1
  321. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  322. 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 35
  323. 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 20224
  324. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  325. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 72
  326. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 123
  327. 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 123
  328. 194 Temperature_Celsius 0x0002 200 200 000 Old_age Always - 30 (Min/Max 17/78)
  329. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
  330. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  331. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  332. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
  333. SMART Error Log Version: 0
  334. No Errors Logged
  335. SMART Self-test log structure revision number 1
  336. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  337. # 1 Short offline Completed without error 00% 8425 -
  338. # 2 Short offline Completed without error 00% 8425 -
  339. SMART Selective self-test log data structure revision number 1
  340. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  341. 1 0 0 Not_testing
  342. 2 0 0 Not_testing
  343. 3 0 0 Not_testing
  344. 4 0 0 Not_testing
  345. 5 0 0 Not_testing
  346. Selective self-test flags (0x0):
  347. After scanning selected spans, do NOT read-scan remainder of disk.
  348. If Selective self-test is pending on power-up, resume after 0 minute delay.

Four HGST Deskstar 7K2000 HDS722020ALA330 drives that have been tortured, beaten, and continue to live to tell the tale while enduring yet more torture.

Comments powered by Disqus