- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.13.0-49-generic (buildd@akateko) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #83-Ubuntu SMP Fri Apr 10 20:11:33 UTC 2015 (Ubuntu 3.13.0-49.83-generic 3.13.11-ckt17)
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-49-generic root=UUID=b2c1dd24-a65e-4e34-b88d-50a53d3a1a0f ro quiet splash vt.handoff=7
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000beb99fff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000beb9a000-0x00000000bf199fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000bf19a000-0x00000000bf299fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000bf29a000-0x00000000bf319fff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000bf31a000-0x00000000bfbfffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000bfc00000-0x00000000bfffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ff800fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019effffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.6 present.
- [ 0.000000] DMI: LENOVO 120032G/120032G, BIOS 8IET41WW(1.14) 02/26/2013
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] No AGP bridge found
- [ 0.000000] e820: last_pfn = 0x19f000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
- [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
- [ 0.000000] 2 base 00FED80000 mask 0FFFFFF000 uncachable
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 base 00FFE00000 mask FFFFE00000 write-protect
- [ 0.000000] TOM2: 000000019f000000 aka 6640M
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
- [ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
- [ 0.000000] e820: last_pfn = 0xbfc00 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [mem 0x000fba90-0x000fba9f] mapped at [ffff8800000fba90]
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
- [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
- [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
- [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
- [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x19ee00000-0x19effffff]
- [ 0.000000] [mem 0x19ee00000-0x19effffff] page 2M
- [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x19c000000-0x19edfffff]
- [ 0.000000] [mem 0x19c000000-0x19edfffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x180000000-0x19bffffff]
- [ 0.000000] [mem 0x180000000-0x19bffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbeb99fff]
- [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
- [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
- [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
- [ 0.000000] [mem 0x80000000-0xbe9fffff] page 2M
- [ 0.000000] [mem 0xbea00000-0xbeb99fff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0xbf31a000-0xbfbfffff]
- [ 0.000000] [mem 0xbf31a000-0xbf3fffff] page 4k
- [ 0.000000] [mem 0xbf400000-0xbfbfffff] page 2M
- [ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
- [ 0.000000] [mem 0x100000000-0x17fffffff] page 1G
- [ 0.000000] RAMDISK: [mem 0x34f4a000-0x3679cfff]
- [ 0.000000] ACPI: RSDP 00000000000f00e0 000024 (v02 LENOVO)
- [ 0.000000] ACPI: XSDT 00000000bf319120 00007C (v01 LENOVO TP-8I 00000041 PTEC 00000002)
- [ 0.000000] ACPI: FACP 00000000bf306000 0000F4 (v04 LENOVO TP-8I 00000041 PTL 00000002)
- [ 0.000000] ACPI: DSDT 00000000bf308000 0103C2 (v01 LENOVO TP-8I 00000041 PTEC 00000041)
- [ 0.000000] ACPI: FACS 00000000bf285000 000040
- [ 0.000000] ACPI: HPET 00000000bf305000 000038 (v01 LENOVO TP-8I 00000041 PTL 00000002)
- [ 0.000000] ACPI: APIC 00000000bf304000 00007A (v02 LENOVO TP-8I 00000041 PTL 00000002)
- [ 0.000000] ACPI: MCFG 00000000bf303000 00003C (v01 LENOVO TP-8I 00000041 PTL 00000002)
- [ 0.000000] ACPI: SBST 00000000bf302000 000030 (v01 LENOVO TP-8I 00000041 PTL 00000002)
- [ 0.000000] ACPI: SLIC 00000000bf301000 000176 (v01 LENOVO TP-8I 00000041 PTEC 00000001)
- [ 0.000000] ACPI: UEFI 00000000bf300000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
- [ 0.000000] ACPI: UEFI 00000000bf2ff000 00003E (v01 LENOVO TP-8I 00000041 PTL 00000002)
- [ 0.000000] ACPI: SSDT 00000000bf2fe000 00072C (v01 AMD POWERNOW 00000001 AMD 00000001)
- [ 0.000000] ACPI: SSDT 00000000bf2fc000 00190A (v02 AMD ALIB 00000001 MSFT 04000000)
- [ 0.000000] ACPI: UEFI 00000000bf2fb000 00022E (v01 LENOVO TP-8I 00000041 PTL 00000002)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000019effffff]
- [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x19effffff]
- [ 0.000000] NODE_DATA [mem 0x19eff9000-0x19effdfff]
- [ 0.000000] [ffffea0000000000-ffffea00067fffff] PMD -> [ffff880198e00000-ffff88019e5fffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal [mem 0x100000000-0x19effffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
- [ 0.000000] node 0: [mem 0x00100000-0xbeb99fff]
- [ 0.000000] node 0: [mem 0xbf31a000-0xbfbfffff]
- [ 0.000000] node 0: [mem 0x100000000-0x19effffff]
- [ 0.000000] On node 0 totalpages: 1434652
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 12178 pages used for memmap
- [ 0.000000] DMA32 zone: 779392 pages, LIFO batch:31
- [ 0.000000] Normal zone: 10176 pages used for memmap
- [ 0.000000] Normal zone: 651264 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbeb9a000-0xbf199fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbf19a000-0xbf299fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbf29a000-0xbf319fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbfc00000-0xbfffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfebfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed7ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xff7fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xff800fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xff801000-0xffdfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
- [ 0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88019ec00000 s82368 r8192 d24128 u524288
- [ 0.000000] pcpu-alloc: s82368 r8192 d24128 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1412213
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-49-generic root=UUID=b2c1dd24-a65e-4e34-b88d-50a53d3a1a0f ro quiet splash vt.handoff=7
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 5540436K/5738608K available (7386K kernel code, 1145K rwdata, 3408K rodata, 1340K init, 1444K bss, 198172K reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
- [ 0.000000] Offload RCU callbacks from all CPUs
- [ 0.000000] Offload RCU callbacks from CPUs: 0-3.
- [ 0.000000] NR_IRQS:16640 nr_irqs:712 16
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] allocated 23068672 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.004000] tsc: Detected 1896.581 MHz processor
- [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3793.16 BogoMIPS (lpj=7586324)
- [ 0.000007] pid_max: default: 32768 minimum: 301
- [ 0.000043] Security Framework initialized
- [ 0.000063] AppArmor: AppArmor initialized
- [ 0.000064] Yama: becoming mindful.
- [ 0.000831] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.003654] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.005009] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.005024] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.005354] Initializing cgroup subsys memory
- [ 0.005362] Initializing cgroup subsys devices
- [ 0.005365] Initializing cgroup subsys freezer
- [ 0.005367] Initializing cgroup subsys blkio
- [ 0.005369] Initializing cgroup subsys perf_event
- [ 0.005372] Initializing cgroup subsys hugetlb
- [ 0.005399] tseg: 00bfc00000
- [ 0.005402] CPU: Physical Processor ID: 0
- [ 0.005403] CPU: Processor Core ID: 0
- [ 0.005405] mce: CPU supports 6 MCE banks
- [ 0.005416] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
- [ 0.005416] Last level dTLB entries: 4KB 1024, 2MB 128, 4MB 64
- [ 0.005416] tlb_flushall_shift: 5
- [ 0.005571] Freeing SMP alternatives memory: 32K (ffffffff81e6f000 - ffffffff81e77000)
- [ 0.007242] ACPI: Core revision 20131115
- [ 0.014709] ACPI: All ACPI Tables successfully acquired
- [ 0.017269] ftrace: allocating 28567 entries in 112 pages
- [ 0.203030] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.242726] smpboot: CPU0: AMD A4-3300M APU with Radeon(tm) HD Graphics (fam: 12, model: 01, stepping: 00)
- [ 0.348764] Performance Events: AMD PMU driver.
- [ 0.348769] ... version: 0
- [ 0.348770] ... bit width: 48
- [ 0.348771] ... generic registers: 4
- [ 0.348773] ... value mask: 0000ffffffffffff
- [ 0.348774] ... max period: 00007fffffffffff
- [ 0.348776] ... fixed-purpose events: 0
- [ 0.348777] ... event mask: 000000000000000f
- [ 0.350741] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.350838] x86: Booting SMP configuration:
- [ 0.350840] .... node #0, CPUs: #1
- [ 0.363965] TSC synchronization [CPU#0 -> CPU#1]:
- [ 0.363967] Measured 186555417 cycles TSC warp between CPUs, turning off TSC clock.
- [ 0.008000] tsc: Marking TSC unstable due to check_tsc_sync_source failed
- [ 0.008000] x86: Booted up 1 node, 2 CPUs
- [ 0.008000] smpboot: Total of 2 processors activated (7586.32 BogoMIPS)
- [ 0.096094] devtmpfs: initialized
- [ 0.102390] EVM: security.selinux
- [ 0.102392] EVM: security.SMACK64
- [ 0.102393] EVM: security.ima
- [ 0.102395] EVM: security.capability
- [ 0.102421] PM: Registering ACPI NVS region [mem 0xbf19a000-0xbf299fff] (1048576 bytes)
- [ 0.102421] pinctrl core: initialized pinctrl subsystem
- [ 0.102421] regulator-dummy: no parameters
- [ 0.102421] RTC time: 22:27:42, date: 04/16/15
- [ 0.102421] NET: Registered protocol family 16
- [ 0.102421] cpuidle: using governor ladder
- [ 0.102421] cpuidle: using governor menu
- [ 0.102421] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.102421] ACPI: bus type PCI registered
- [ 0.102421] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.102421] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 0.102421] PCI: not using MMCONFIG
- [ 0.102421] PCI: Using configuration type 1 for base access
- [ 0.102421] PCI: Using configuration type 1 for extended access
- [ 0.102421] mtrr: your CPUs had inconsistent variable MTRR settings
- [ 0.102421] mtrr: probably your BIOS does not setup all CPUs.
- [ 0.102421] mtrr: corrected configuration.
- [ 0.104122] bio: create slab <bio-0> at 0
- [ 0.104160] ACPI: Added _OSI(Module Device)
- [ 0.104165] ACPI: Added _OSI(Processor Device)
- [ 0.104167] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.104169] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.117337] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.236187] ACPI: Interpreter enabled
- [ 0.236203] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
- [ 0.236209] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
- [ 0.236230] ACPI: (supports S0 S3 S4 S5)
- [ 0.236233] ACPI: Using IOAPIC for interrupt routing
- [ 0.236430] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 0.236747] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
- [ 0.238766] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.238961] ACPI: No dock devices found.
- [ 0.248381] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
- [ 0.248402] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
- [ 0.248647] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
- [ 0.248662] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
- [ 0.250272] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
- [ 0.250293] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
- [ 0.251172] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.251179] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.251442] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
- [ 0.252361] acpi PNP0A08:00: host bridge window expanded to [mem 0xe0000000-0xffffffff]; [mem 0xe0000000-0xf7ffffff] ignored
- [ 0.252367] acpi PNP0A08:00: ignoring host bridge window [mem 0x000ce000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cefff])
- [ 0.252374] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
- [ 0.252646] PCI host bridge to bus 0000:00
- [ 0.252649] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.252651] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.252652] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c1fff]
- [ 0.252654] pci_bus 0000:00: root bus resource [mem 0x000c2000-0x000c3fff]
- [ 0.252656] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c5fff]
- [ 0.252658] pci_bus 0000:00: root bus resource [mem 0x000c6000-0x000c7fff]
- [ 0.252659] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000c9fff]
- [ 0.252661] pci_bus 0000:00: root bus resource [mem 0x000ca000-0x000cbfff]
- [ 0.252663] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cdfff]
- [ 0.252665] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d1fff]
- [ 0.252666] pci_bus 0000:00: root bus resource [mem 0x000d2000-0x000d3fff]
- [ 0.252668] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d5fff]
- [ 0.252670] pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff]
- [ 0.252671] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000d9fff]
- [ 0.252673] pci_bus 0000:00: root bus resource [mem 0x000da000-0x000dbfff]
- [ 0.252675] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff]
- [ 0.252677] pci_bus 0000:00: root bus resource [mem 0x000de000-0x000dffff]
- [ 0.252680] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e1fff]
- [ 0.252682] pci_bus 0000:00: root bus resource [mem 0x000e2000-0x000e3fff]
- [ 0.252683] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e5fff]
- [ 0.252685] pci_bus 0000:00: root bus resource [mem 0x000e6000-0x000e7fff]
- [ 0.252687] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000e9fff]
- [ 0.252689] pci_bus 0000:00: root bus resource [mem 0x000ea000-0x000ebfff]
- [ 0.252690] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000edfff]
- [ 0.252692] pci_bus 0000:00: root bus resource [mem 0x000ee000-0x000effff]
- [ 0.252694] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
- [ 0.252696] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.252697] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.252705] pci 0000:00:00.0: [1022:1705] type 00 class 0x060000
- [ 0.252793] pci 0000:00:01.0: [1002:9648] type 00 class 0x030000
- [ 0.252807] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
- [ 0.252814] pci 0000:00:01.0: reg 0x14: [io 0x4000-0x40ff]
- [ 0.252822] pci 0000:00:01.0: reg 0x18: [mem 0xf0b00000-0xf0b3ffff]
- [ 0.252870] pci 0000:00:01.0: supports D1 D2
- [ 0.252948] pci 0000:00:01.1: [1002:1714] type 00 class 0x040300
- [ 0.252958] pci 0000:00:01.1: reg 0x10: [mem 0xf0b44000-0xf0b47fff]
- [ 0.253015] pci 0000:00:01.1: supports D1 D2
- [ 0.253143] pci 0000:00:04.0: [1022:1709] type 01 class 0x060400
- [ 0.253204] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
- [ 0.253261] pci 0000:00:04.0: System wakeup disabled by ACPI
- [ 0.253310] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
- [ 0.253331] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
- [ 0.253341] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
- [ 0.253351] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
- [ 0.253362] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
- [ 0.253372] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
- [ 0.253382] pci 0000:00:11.0: reg 0x24: [mem 0xf0b4b000-0xf0b4b7ff]
- [ 0.253499] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
- [ 0.253515] pci 0000:00:12.0: reg 0x10: [mem 0xf0b4a000-0xf0b4afff]
- [ 0.253622] pci 0000:00:12.0: System wakeup disabled by ACPI
- [ 0.253663] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
- [ 0.253685] pci 0000:00:12.2: reg 0x10: [mem 0xf0b4bb00-0xf0b4bbff]
- [ 0.253779] pci 0000:00:12.2: supports D1 D2
- [ 0.253782] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
- [ 0.253835] pci 0000:00:12.2: System wakeup disabled by ACPI
- [ 0.253875] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
- [ 0.253891] pci 0000:00:13.0: reg 0x10: [mem 0xf0b49000-0xf0b49fff]
- [ 0.253989] pci 0000:00:13.0: System wakeup disabled by ACPI
- [ 0.254026] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
- [ 0.254047] pci 0000:00:13.2: reg 0x10: [mem 0xf0b4ba00-0xf0b4baff]
- [ 0.254137] pci 0000:00:13.2: supports D1 D2
- [ 0.254139] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
- [ 0.254224] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
- [ 0.254352] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
- [ 0.254377] pci 0000:00:14.2: reg 0x10: [mem 0xf0b40000-0xf0b43fff 64bit]
- [ 0.254453] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
- [ 0.254503] pci 0000:00:14.2: System wakeup disabled by ACPI
- [ 0.254535] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
- [ 0.254675] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
- [ 0.254745] pci 0000:00:14.4: System wakeup disabled by ACPI
- [ 0.254778] pci 0000:00:14.7: [1022:7806] type 00 class 0x080501
- [ 0.254796] pci 0000:00:14.7: reg 0x10: [mem 0xf0b4b900-0xf0b4b9ff]
- [ 0.254956] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
- [ 0.255038] pci 0000:00:15.0: supports D1 D2
- [ 0.255095] pci 0000:00:15.0: System wakeup disabled by ACPI
- [ 0.255133] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
- [ 0.255222] pci 0000:00:15.1: supports D1 D2
- [ 0.255279] pci 0000:00:15.1: System wakeup disabled by ACPI
- [ 0.255320] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
- [ 0.255405] pci 0000:00:15.2: supports D1 D2
- [ 0.255451] pci 0000:00:15.2: System wakeup disabled by ACPI
- [ 0.255487] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
- [ 0.255502] pci 0000:00:16.0: reg 0x10: [mem 0xf0b48000-0xf0b48fff]
- [ 0.255610] pci 0000:00:16.0: System wakeup disabled by ACPI
- [ 0.255651] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
- [ 0.255673] pci 0000:00:16.2: reg 0x10: [mem 0xf0b4b800-0xf0b4b8ff]
- [ 0.255767] pci 0000:00:16.2: supports D1 D2
- [ 0.255769] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
- [ 0.255823] pci 0000:00:16.2: System wakeup disabled by ACPI
- [ 0.255862] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
- [ 0.255955] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
- [ 0.256040] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
- [ 0.256113] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
- [ 0.256206] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
- [ 0.256294] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
- [ 0.256382] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
- [ 0.256467] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
- [ 0.256688] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.256706] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
- [ 0.256731] pci 0000:01:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
- [ 0.256747] pci 0000:01:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
- [ 0.256813] pci 0000:01:00.0: supports D1 D2
- [ 0.256814] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.268066] pci 0000:00:04.0: PCI bridge to [bus 01]
- [ 0.268086] pci 0000:00:04.0: bridge window [io 0x3000-0x3fff]
- [ 0.268099] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
- [ 0.268218] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
- [ 0.268228] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.268230] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c1fff] (subtractive decode)
- [ 0.268232] pci 0000:00:14.4: bridge window [mem 0x000c2000-0x000c3fff] (subtractive decode)
- [ 0.268234] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c5fff] (subtractive decode)
- [ 0.268236] pci 0000:00:14.4: bridge window [mem 0x000c6000-0x000c7fff] (subtractive decode)
- [ 0.268238] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000c9fff] (subtractive decode)
- [ 0.268240] pci 0000:00:14.4: bridge window [mem 0x000ca000-0x000cbfff] (subtractive decode)
- [ 0.268242] pci 0000:00:14.4: bridge window [mem 0x000cc000-0x000cdfff] (subtractive decode)
- [ 0.268244] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode)
- [ 0.268245] pci 0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode)
- [ 0.268247] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
- [ 0.268249] pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
- [ 0.268251] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
- [ 0.268253] pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
- [ 0.268254] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
- [ 0.268256] pci 0000:00:14.4: bridge window [mem 0x000de000-0x000dffff] (subtractive decode)
- [ 0.268258] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e1fff] (subtractive decode)
- [ 0.268260] pci 0000:00:14.4: bridge window [mem 0x000e2000-0x000e3fff] (subtractive decode)
- [ 0.268262] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e5fff] (subtractive decode)
- [ 0.268264] pci 0000:00:14.4: bridge window [mem 0x000e6000-0x000e7fff] (subtractive decode)
- [ 0.268266] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000e9fff] (subtractive decode)
- [ 0.268267] pci 0000:00:14.4: bridge window [mem 0x000ea000-0x000ebfff] (subtractive decode)
- [ 0.268269] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000edfff] (subtractive decode)
- [ 0.268271] pci 0000:00:14.4: bridge window [mem 0x000ee000-0x000effff] (subtractive decode)
- [ 0.268273] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
- [ 0.268275] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.268277] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.268358] pci 0000:00:15.0: PCI bridge to [bus 03]
- [ 0.269121] pci 0000:04:00.0: [1180:e823] type 00 class 0x088001
- [ 0.269138] pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz.
- [ 0.269160] pci 0000:04:00.0: reg 0x10: [mem 0xf0a00000-0xf0a000ff]
- [ 0.269311] pci 0000:04:00.0: supports D1 D2
- [ 0.269312] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.280153] pci 0000:00:15.1: PCI bridge to [bus 04]
- [ 0.280169] pci 0000:00:15.1: bridge window [mem 0xf0a00000-0xf0afffff]
- [ 0.280309] pci 0000:05:00.0: [10ec:8176] type 00 class 0x028000
- [ 0.280333] pci 0000:05:00.0: reg 0x10: [io 0x2000-0x20ff]
- [ 0.280371] pci 0000:05:00.0: reg 0x18: [mem 0xf0900000-0xf0903fff 64bit]
- [ 0.280485] pci 0000:05:00.0: supports D1 D2
- [ 0.280487] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.288085] pci 0000:00:15.2: PCI bridge to [bus 05]
- [ 0.288103] pci 0000:00:15.2: bridge window [io 0x2000-0x2fff]
- [ 0.288109] pci 0000:00:15.2: bridge window [mem 0xf0900000-0xf09fffff]
- [ 0.288344] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
- [ 0.289655] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0
- [ 0.289710] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0
- [ 0.289769] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0
- [ 0.289825] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0
- [ 0.289872] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
- [ 0.289908] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0
- [ 0.289945] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0
- [ 0.289982] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0
- [ 0.290442] ACPI: Enabled 4 GPEs in block 00 to 1F
- [ 0.290452] ACPI: \_SB_.PCI0: notify handler is installed
- [ 0.290518] Found 1 acpi root devices
- [ 0.290578] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
- [ 0.292047] vgaarb: setting as boot device: PCI:0000:00:01.0
- [ 0.292047] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.292055] vgaarb: loaded
- [ 0.292057] vgaarb: bridge control possible 0000:00:01.0
- [ 0.292252] SCSI subsystem initialized
- [ 0.292332] libata version 3.00 loaded.
- [ 0.292355] ACPI: bus type USB registered
- [ 0.292377] usbcore: registered new interface driver usbfs
- [ 0.292388] usbcore: registered new interface driver hub
- [ 0.292398] usbcore: registered new device driver usb
- [ 0.292398] PCI: Using ACPI for IRQ routing
- [ 0.297351] PCI: pci_cache_line_size set to 64 bytes
- [ 0.297447] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
- [ 0.297450] e820: reserve RAM buffer [mem 0xbeb9a000-0xbfffffff]
- [ 0.297451] e820: reserve RAM buffer [mem 0xbfc00000-0xbfffffff]
- [ 0.297453] e820: reserve RAM buffer [mem 0x19f000000-0x19fffffff]
- [ 0.297558] NetLabel: Initializing
- [ 0.297559] NetLabel: domain hash size = 128
- [ 0.297560] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.297571] NetLabel: unlabeled traffic allowed by default
- [ 0.297586] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.297586] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
- [ 0.298168] Switched to clocksource hpet
- [ 0.301936] AppArmor: AppArmor Filesystem Enabled
- [ 0.301973] pnp: PnP ACPI init
- [ 0.301994] ACPI: bus type PNP registered
- [ 0.302155] system 00:00: [io 0x0f50-0x0f51] has been reserved
- [ 0.302160] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.302164] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.302167] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
- [ 0.302171] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.302561] pnp 00:01: [dma 4]
- [ 0.302589] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.302628] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.302663] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.302734] system 00:04: [io 0x04d0-0x04d1] has been reserved
- [ 0.302737] system 00:04: [io 0x0530-0x0537] has been reserved
- [ 0.302740] system 00:04: [io 0x0800-0x0827] could not be reserved
- [ 0.302743] system 00:04: [io 0x0830] has been reserved
- [ 0.302745] system 00:04: [io 0x0840-0x0847] has been reserved
- [ 0.302748] system 00:04: [io 0x0b00-0x0b1f] has been reserved
- [ 0.302751] system 00:04: [io 0x0b20-0x0b3f] has been reserved
- [ 0.302753] system 00:04: [io 0x0c00-0x0c01] has been reserved
- [ 0.302756] system 00:04: [io 0x0c14] has been reserved
- [ 0.302758] system 00:04: [io 0x0c50-0x0c52] has been reserved
- [ 0.302761] system 00:04: [io 0x0cd0-0x0cd1] has been reserved
- [ 0.302763] system 00:04: [io 0x0cd2-0x0cd3] has been reserved
- [ 0.302766] system 00:04: [io 0x0cd4-0x0cd5] has been reserved
- [ 0.302768] system 00:04: [io 0x0cd6-0x0cd7] has been reserved
- [ 0.302771] system 00:04: [io 0x0cd8-0x0cdf] has been reserved
- [ 0.302774] system 00:04: [io 0x0cf9] could not be reserved
- [ 0.302777] system 00:04: [io 0x8100-0x81ff window] has been reserved
- [ 0.302779] system 00:04: [io 0x8200-0x82ff window] has been reserved
- [ 0.302783] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.302912] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
- [ 0.302916] system 00:05: [mem 0xffe00000-0xffffffff] has been reserved
- [ 0.302919] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved
- [ 0.302922] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
- [ 0.302924] system 00:05: [mem 0xfed61000-0xfed613ff] has been reserved
- [ 0.302927] system 00:05: [mem 0xfed80000-0xfed80fff] has been reserved
- [ 0.302930] system 00:05: [mem 0xff800000-0xff80ffff] could not be reserved
- [ 0.302933] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.303049] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.303082] pnp 00:07: Plug and Play ACPI device, IDs LEN0023 PNP0f13 (active)
- [ 0.303122] pnp: PnP ACPI: found 8 devices
- [ 0.303123] ACPI: bus type PNP unregistered
- [ 0.311244] pci 0000:00:15.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
- [ 0.311255] pci 0000:00:15.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- [ 0.311266] pci 0000:00:15.2: BAR 15: assigned [mem 0xf0100000-0xf02fffff 64bit pref]
- [ 0.311269] pci 0000:00:04.0: PCI bridge to [bus 01]
- [ 0.311274] pci 0000:00:04.0: bridge window [io 0x3000-0x3fff]
- [ 0.311280] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
- [ 0.311285] pci 0000:00:14.4: PCI bridge to [bus 02]
- [ 0.311300] pci 0000:00:15.0: PCI bridge to [bus 03]
- [ 0.311312] pci 0000:00:15.1: PCI bridge to [bus 04]
- [ 0.311318] pci 0000:00:15.1: bridge window [mem 0xf0a00000-0xf0afffff]
- [ 0.311327] pci 0000:00:15.2: PCI bridge to [bus 05]
- [ 0.311331] pci 0000:00:15.2: bridge window [io 0x2000-0x2fff]
- [ 0.311336] pci 0000:00:15.2: bridge window [mem 0xf0900000-0xf09fffff]
- [ 0.311341] pci 0000:00:15.2: bridge window [mem 0xf0100000-0xf02fffff 64bit pref]
- [ 0.311349] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
- [ 0.311351] pci_bus 0000:00: resource 5 [mem 0x000c0000-0x000c1fff]
- [ 0.311353] pci_bus 0000:00: resource 6 [mem 0x000c2000-0x000c3fff]
- [ 0.311356] pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000c5fff]
- [ 0.311358] pci_bus 0000:00: resource 8 [mem 0x000c6000-0x000c7fff]
- [ 0.311360] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000c9fff]
- [ 0.311363] pci_bus 0000:00: resource 10 [mem 0x000ca000-0x000cbfff]
- [ 0.311365] pci_bus 0000:00: resource 11 [mem 0x000cc000-0x000cdfff]
- [ 0.311367] pci_bus 0000:00: resource 12 [mem 0x000d0000-0x000d1fff]
- [ 0.311370] pci_bus 0000:00: resource 13 [mem 0x000d2000-0x000d3fff]
- [ 0.311372] pci_bus 0000:00: resource 14 [mem 0x000d4000-0x000d5fff]
- [ 0.311374] pci_bus 0000:00: resource 15 [mem 0x000d6000-0x000d7fff]
- [ 0.311376] pci_bus 0000:00: resource 16 [mem 0x000d8000-0x000d9fff]
- [ 0.311379] pci_bus 0000:00: resource 17 [mem 0x000da000-0x000dbfff]
- [ 0.311381] pci_bus 0000:00: resource 18 [mem 0x000dc000-0x000ddfff]
- [ 0.311383] pci_bus 0000:00: resource 19 [mem 0x000de000-0x000dffff]
- [ 0.311385] pci_bus 0000:00: resource 20 [mem 0x000e0000-0x000e1fff]
- [ 0.311388] pci_bus 0000:00: resource 21 [mem 0x000e2000-0x000e3fff]
- [ 0.311390] pci_bus 0000:00: resource 22 [mem 0x000e4000-0x000e5fff]
- [ 0.311392] pci_bus 0000:00: resource 23 [mem 0x000e6000-0x000e7fff]
- [ 0.311395] pci_bus 0000:00: resource 24 [mem 0x000e8000-0x000e9fff]
- [ 0.311397] pci_bus 0000:00: resource 25 [mem 0x000ea000-0x000ebfff]
- [ 0.311399] pci_bus 0000:00: resource 26 [mem 0x000ec000-0x000edfff]
- [ 0.311402] pci_bus 0000:00: resource 27 [mem 0x000ee000-0x000effff]
- [ 0.311404] pci_bus 0000:00: resource 28 [mem 0xe0000000-0xffffffff]
- [ 0.311406] pci_bus 0000:00: resource 29 [io 0x0000-0x0cf7]
- [ 0.311409] pci_bus 0000:00: resource 30 [io 0x0d00-0xffff]
- [ 0.311411] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
- [ 0.311414] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
- [ 0.311417] pci_bus 0000:02: resource 4 [mem 0x000a0000-0x000bffff]
- [ 0.311419] pci_bus 0000:02: resource 5 [mem 0x000c0000-0x000c1fff]
- [ 0.311421] pci_bus 0000:02: resource 6 [mem 0x000c2000-0x000c3fff]
- [ 0.311424] pci_bus 0000:02: resource 7 [mem 0x000c4000-0x000c5fff]
- [ 0.311426] pci_bus 0000:02: resource 8 [mem 0x000c6000-0x000c7fff]
- [ 0.311428] pci_bus 0000:02: resource 9 [mem 0x000c8000-0x000c9fff]
- [ 0.311431] pci_bus 0000:02: resource 10 [mem 0x000ca000-0x000cbfff]
- [ 0.311433] pci_bus 0000:02: resource 11 [mem 0x000cc000-0x000cdfff]
- [ 0.311435] pci_bus 0000:02: resource 12 [mem 0x000d0000-0x000d1fff]
- [ 0.311438] pci_bus 0000:02: resource 13 [mem 0x000d2000-0x000d3fff]
- [ 0.311440] pci_bus 0000:02: resource 14 [mem 0x000d4000-0x000d5fff]
- [ 0.311442] pci_bus 0000:02: resource 15 [mem 0x000d6000-0x000d7fff]
- [ 0.311445] pci_bus 0000:02: resource 16 [mem 0x000d8000-0x000d9fff]
- [ 0.311447] pci_bus 0000:02: resource 17 [mem 0x000da000-0x000dbfff]
- [ 0.311449] pci_bus 0000:02: resource 18 [mem 0x000dc000-0x000ddfff]
- [ 0.311452] pci_bus 0000:02: resource 19 [mem 0x000de000-0x000dffff]
- [ 0.311454] pci_bus 0000:02: resource 20 [mem 0x000e0000-0x000e1fff]
- [ 0.311456] pci_bus 0000:02: resource 21 [mem 0x000e2000-0x000e3fff]
- [ 0.311459] pci_bus 0000:02: resource 22 [mem 0x000e4000-0x000e5fff]
- [ 0.311461] pci_bus 0000:02: resource 23 [mem 0x000e6000-0x000e7fff]
- [ 0.311463] pci_bus 0000:02: resource 24 [mem 0x000e8000-0x000e9fff]
- [ 0.311466] pci_bus 0000:02: resource 25 [mem 0x000ea000-0x000ebfff]
- [ 0.311468] pci_bus 0000:02: resource 26 [mem 0x000ec000-0x000edfff]
- [ 0.311470] pci_bus 0000:02: resource 27 [mem 0x000ee000-0x000effff]
- [ 0.311473] pci_bus 0000:02: resource 28 [mem 0xe0000000-0xffffffff]
- [ 0.311475] pci_bus 0000:02: resource 29 [io 0x0000-0x0cf7]
- [ 0.311477] pci_bus 0000:02: resource 30 [io 0x0d00-0xffff]
- [ 0.311480] pci_bus 0000:04: resource 1 [mem 0xf0a00000-0xf0afffff]
- [ 0.311483] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
- [ 0.311485] pci_bus 0000:05: resource 1 [mem 0xf0900000-0xf09fffff]
- [ 0.311487] pci_bus 0000:05: resource 2 [mem 0xf0100000-0xf02fffff 64bit pref]
- [ 0.311527] NET: Registered protocol family 2
- [ 0.311810] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.312116] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.312470] TCP: Hash tables configured (established 65536 bind 65536)
- [ 0.312530] TCP: reno registered
- [ 0.312543] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.312607] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.312753] NET: Registered protocol family 1
- [ 0.312772] pci 0000:00:01.0: Video device with shadowed ROM
- [ 0.528918] PCI: CLS 32 bytes, default 64
- [ 0.528984] Trying to unpack rootfs image as initramfs...
- [ 1.054532] Freeing initrd memory: 24908K (ffff880034f4a000 - ffff88003679d000)
- [ 1.054539] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 1.054543] software IO TLB [mem 0xbab9a000-0xbeb9a000] (64MB) mapped at [ffff8800bab9a000-ffff8800beb99fff]
- [ 1.054750] LVT offset 0 assigned for vector 0x400
- [ 1.054789] perf: AMD IBS detected (0x000000ff)
- [ 1.054842] microcode: CPU0: patch_level=0x03000014
- [ 1.054865] microcode: CPU1: patch_level=0x03000014
- [ 1.054984] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 1.054988] Scanning for low memory corruption every 60 seconds
- [ 1.055411] Initialise system trusted keyring
- [ 1.055477] audit: initializing netlink socket (disabled)
- [ 1.055492] type=2000 audit(1429223263.052:1): initialized
- [ 1.091783] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 1.093498] zbud: loaded
- [ 1.093803] VFS: Disk quotas dquot_6.5.2
- [ 1.093880] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.094579] fuse init (API version 7.22)
- [ 1.094709] msgmni has been set to 10869
- [ 1.094772] Key type big_key registered
- [ 1.095317] Key type asymmetric registered
- [ 1.095323] Asymmetric key parser 'x509' registered
- [ 1.095388] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 1.095453] io scheduler noop registered
- [ 1.095457] io scheduler deadline registered (default)
- [ 1.095497] io scheduler cfq registered
- [ 1.095833] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
- [ 1.096155] pcieport 0000:00:15.0: irq 41 for MSI/MSI-X
- [ 1.096454] pcieport 0000:00:15.1: irq 42 for MSI/MSI-X
- [ 1.096520] pcieport 0000:00:15.2: enabling device (0006 -> 0007)
- [ 1.096786] pcieport 0000:00:15.2: irq 43 for MSI/MSI-X
- [ 1.096891] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
- [ 1.096894] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
- [ 1.096898] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
- [ 1.096918] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
- [ 1.096923] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
- [ 1.096946] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
- [ 1.096948] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
- [ 1.096952] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
- [ 1.096969] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
- [ 1.096970] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
- [ 1.096974] pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
- [ 1.096985] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 1.097025] pciehp 0000:00:15.2:pcie04: HPC vendor_id 1022 device_id 43a2 ss_vid 1022 ss_did 0
- [ 1.097053] pciehp 0000:00:15.2:pcie04: service driver pciehp loaded
- [ 1.097056] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 1.097093] vesafb: mode is 1024x768x32, linelength=4096, pages=0
- [ 1.097094] vesafb: scrolling: redraw
- [ 1.097096] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
- [ 1.097284] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f00000, using 3072k, total 3072k
- [ 1.110156] Console: switching to colour frame buffer device 128x48
- [ 1.122892] fb0: VESA VGA frame buffer device
- [ 1.123035] ipmi message handler version 39.2
- [ 1.136422] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- [ 1.136522] ACPI: AC Adapter [ADP1] (off-line)
- [ 1.136630] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
- [ 1.141452] ACPI: Lid Switch [LID0]
- [ 1.141532] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
- [ 1.141537] ACPI: Power Button [PWRB]
- [ 1.141576] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- [ 1.141578] ACPI: Power Button [PWRF]
- [ 1.141712] ACPI: acpi_idle registered with cpuidle
- [ 1.141817] GHES: HEST is not enabled!
- [ 1.141916] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 1.142726] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- [ 1.142733] ACPI: Battery Slot [BAT0] (battery present)
- [ 1.143088] Linux agpgart interface v0.103
- [ 1.145027] brd: module loaded
- [ 1.145908] loop: module loaded
- [ 1.146329] libphy: Fixed MDIO Bus: probed
- [ 1.146424] tun: Universal TUN/TAP device driver, 1.6
- [ 1.146425] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.146526] PPP generic driver version 2.4.2
- [ 1.146585] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.146594] ehci-pci: EHCI PCI platform driver
- [ 1.146910] QUIRK: Enable AMD PLL fix
- [ 1.146941] ehci-pci 0000:00:12.2: EHCI Host Controller
- [ 1.146948] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
- [ 1.146954] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 1.146966] ehci-pci 0000:00:12.2: debug port 1
- [ 1.147022] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0b4bb00
- [ 1.156091] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
- [ 1.156158] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.156161] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.156163] usb usb1: Product: EHCI Host Controller
- [ 1.156165] usb usb1: Manufacturer: Linux 3.13.0-49-generic ehci_hcd
- [ 1.156168] usb usb1: SerialNumber: 0000:00:12.2
- [ 1.156346] hub 1-0:1.0: USB hub found
- [ 1.156355] hub 1-0:1.0: 5 ports detected
- [ 1.156827] ehci-pci 0000:00:13.2: EHCI Host Controller
- [ 1.156832] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
- [ 1.156836] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 1.156848] ehci-pci 0000:00:13.2: debug port 1
- [ 1.156877] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0b4ba00
- [ 1.168255] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
- [ 1.168343] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.168345] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.168347] usb usb2: Product: EHCI Host Controller
- [ 1.168349] usb usb2: Manufacturer: Linux 3.13.0-49-generic ehci_hcd
- [ 1.168351] usb usb2: SerialNumber: 0000:00:13.2
- [ 1.168622] hub 2-0:1.0: USB hub found
- [ 1.168633] hub 2-0:1.0: 5 ports detected
- [ 1.169040] ehci-pci 0000:00:16.2: EHCI Host Controller
- [ 1.169046] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
- [ 1.169049] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 1.169062] ehci-pci 0000:00:16.2: debug port 1
- [ 1.169095] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0b4b800
- [ 1.180255] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
- [ 1.180327] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.180329] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.180331] usb usb3: Product: EHCI Host Controller
- [ 1.180333] usb usb3: Manufacturer: Linux 3.13.0-49-generic ehci_hcd
- [ 1.180334] usb usb3: SerialNumber: 0000:00:16.2
- [ 1.180609] hub 3-0:1.0: USB hub found
- [ 1.180621] hub 3-0:1.0: 4 ports detected
- [ 1.180771] ehci-platform: EHCI generic platform driver
- [ 1.180782] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.180783] ohci-pci: OHCI PCI platform driver
- [ 1.181045] ohci-pci 0000:00:12.0: OHCI PCI host controller
- [ 1.181050] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
- [ 1.181078] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0b4a000
- [ 1.240279] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.240285] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.240288] usb usb4: Product: OHCI PCI host controller
- [ 1.240290] usb usb4: Manufacturer: Linux 3.13.0-49-generic ohci_hcd
- [ 1.240292] usb usb4: SerialNumber: 0000:00:12.0
- [ 1.240592] hub 4-0:1.0: USB hub found
- [ 1.240652] hub 4-0:1.0: 5 ports detected
- [ 1.241148] ohci-pci 0000:00:13.0: OHCI PCI host controller
- [ 1.241154] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
- [ 1.241174] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0b49000
- [ 1.300273] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.300278] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.300280] usb usb5: Product: OHCI PCI host controller
- [ 1.300282] usb usb5: Manufacturer: Linux 3.13.0-49-generic ohci_hcd
- [ 1.300283] usb usb5: SerialNumber: 0000:00:13.0
- [ 1.300542] hub 5-0:1.0: USB hub found
- [ 1.300602] hub 5-0:1.0: 5 ports detected
- [ 1.301007] ohci-pci 0000:00:16.0: OHCI PCI host controller
- [ 1.301014] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6
- [ 1.301037] ohci-pci 0000:00:16.0: irq 18, io mem 0xf0b48000
- [ 1.360278] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.360283] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.360285] usb usb6: Product: OHCI PCI host controller
- [ 1.360287] usb usb6: Manufacturer: Linux 3.13.0-49-generic ohci_hcd
- [ 1.360288] usb usb6: SerialNumber: 0000:00:16.0
- [ 1.360578] hub 6-0:1.0: USB hub found
- [ 1.360638] hub 6-0:1.0: 4 ports detected
- [ 1.360768] ohci-platform: OHCI generic platform driver
- [ 1.360781] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.360854] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
- [ 1.387078] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.387083] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 1.387347] mousedev: PS/2 mouse device common for all mice
- [ 1.388074] rtc_cmos 00:03: RTC can wake from S4
- [ 1.388231] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 1.388260] rtc_cmos 00:03: alarms up to one month, 114 bytes nvram, hpet irqs
- [ 1.388347] device-mapper: uevent: version 1.0.3
- [ 1.388436] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
- [ 1.388445] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.388577] TCP: cubic registered
- [ 1.388684] NET: Registered protocol family 10
- [ 1.388863] NET: Registered protocol family 17
- [ 1.388873] Key type dns_resolver registered
- [ 1.389219] Loading compiled-in X.509 certificates
- [ 1.390487] Loaded X.509 cert 'Magrathea: Glacier signing key: 6fca287c2573d09ca32c1980c0d763777a63d4f5'
- [ 1.390501] registered taskstats version 1
- [ 1.393454] Key type trusted registered
- [ 1.398414] Key type encrypted registered
- [ 1.398422] AppArmor: AppArmor sha1 policy hashing enabled
- [ 1.398425] IMA: No TPM chip found, activating TPM-bypass!
- [ 1.398837] regulator-dummy: disabling
- [ 1.398910] Magic number: 11:450:502
- [ 1.399002] rtc_cmos 00:03: setting system clock to 2015-04-16 22:27:44 UTC (1429223264)
- [ 1.399137] acpi-cpufreq: overriding BIOS provided _PSD data
- [ 1.399274] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 1.399275] EDD information not available.
- [ 1.399324] PM: Hibernation image not present or could not be loaded.
- [ 1.401239] Freeing unused kernel memory: 1340K (ffffffff81d20000 - ffffffff81e6f000)
- [ 1.401243] Write protecting the kernel read-only data: 12288k
- [ 1.404223] Freeing unused kernel memory: 796K (ffff880001739000 - ffff880001800000)
- [ 1.406806] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
- [ 1.421355] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
- [ 1.430446] systemd-udevd[104]: starting version 204
- [ 1.452511] ahci 0000:00:11.0: version 3.0
- [ 1.452892] ahci 0000:00:11.0: irq 44 for MSI/MSI-X
- [ 1.452972] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
- [ 1.452977] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
- [ 1.454886] scsi0 : ahci
- [ 1.456584] scsi1 : ahci
- [ 1.457809] sdhci: Secure Digital Host Controller Interface driver
- [ 1.457814] sdhci: Copyright(c) Pierre Ossman
- [ 1.459956] ACPI: Video Device [VGA2] (multi-head: yes rom: no post: no)
- [ 1.460106] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
- [ 1.462976] acpi device:3f: registered as cooling_device2
- [ 1.463033] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:02/input/input5
- [ 1.463079] scsi2 : ahci
- [ 1.463181] ata1: SATA max UDMA/133 abar m2048@0xf0b4b000 port 0xf0b4b100 irq 44
- [ 1.463184] ata2: SATA max UDMA/133 abar m2048@0xf0b4b000 port 0xf0b4b180 irq 44
- [ 1.463188] ata3: SATA max UDMA/133 abar m2048@0xf0b4b000 port 0xf0b4b200 irq 44
- [ 1.463316] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7806] (rev 0)
- [ 1.463573] sdhci-pci 0000:00:14.7: dummy supplies not allowed
- [ 1.463575] mmc0: no vqmmc regulator found
- [ 1.463578] sdhci-pci 0000:00:14.7: dummy supplies not allowed
- [ 1.463579] mmc0: no vmmc regulator found
- [ 1.463655] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
- [ 1.463669] sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e823] (rev 4)
- [ 1.463735] sdhci-pci 0000:04:00.0: dummy supplies not allowed
- [ 1.463736] mmc1: no vqmmc regulator found
- [ 1.463738] sdhci-pci 0000:04:00.0: dummy supplies not allowed
- [ 1.463740] mmc1: no vmmc regulator found
- [ 1.463787] mmc1: SDHCI controller on PCI [0000:04:00.0] using DMA
- [ 1.464285] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 1.464301] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
- [ 1.464808] r8169 0000:01:00.0: irq 45 for MSI/MSI-X
- [ 1.464993] r8169 0000:01:00.0 eth0: RTL8168e/8111e at 0xffffc90000cde000, f0:de:f1:aa:1c:ee, XID 0c200000 IRQ 45
- [ 1.464996] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 1.496109] usb 2-3: new high-speed USB device number 2 using ehci-pci
- [ 1.639107] usb 2-3: New USB device found, idVendor=04f2, idProduct=b257
- [ 1.639119] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.639125] usb 2-3: Product: Integrated Camera
- [ 1.639130] usb 2-3: Manufacturer: Ricoh Company Ltd.
- [ 1.784295] ata3: SATA link down (SStatus 0 SControl 300)
- [ 1.952275] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.956268] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.960213] ata2.00: ATAPI: SlimtypeDVD A DS8A5SH, XL63, max UDMA/100
- [ 1.962022] ata2.00: configured for UDMA/100
- [ 1.992383] ata1.00: ATA-8: ST9500420AS, 0003LVM1, max UDMA/100
- [ 1.992388] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 1.994704] ata1.00: configured for UDMA/100
- [ 1.995135] scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0003 PQ: 0 ANSI: 5
- [ 1.995397] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.995411] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 1.995462] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.995465] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.995571] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.000702] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A5SH XL63 PQ: 0 ANSI: 5
- [ 2.006642] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 2.006648] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 2.006778] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 2.006832] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 2.029285] sda: sda1 sda2 sda3 sda4 < sda5 >
- [ 2.029980] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 2.551103] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd000b3/0x340000/0xa0400, board id: 1715, fw id: 758851
- [ 2.551123] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
- [ 2.615628] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
- [ 6.972598] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
- [ 7.028037] random: nonblocking pool is initialized
- [ 8.818361] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
- [ 9.125100] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
- [ 9.659740] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
- [ 9.659746] EXT4-fs (sda1): write access will be enabled during recovery
- [ 13.026054] EXT4-fs (sda1): recovery complete
- [ 13.031265] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 23.412937] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 23.585821] systemd-udevd[311]: starting version 204
- [ 23.899746] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
- [ 23.899751] AMD IOMMUv2 functionality not available on this system
- [ 23.909360] lp: driver loaded but no devices found
- [ 23.921816] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 23.929179] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMB_.SMB0 1 (20131115/utaddress-251)
- [ 23.929189] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 23.944660] ppdev: user-space parallel port driver
- [ 23.949613] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
- [ 24.032676] type=1400 audit(1429216087.132:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=391 comm="apparmor_parser"
- [ 24.032686] type=1400 audit(1429216087.132:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=391 comm="apparmor_parser"
- [ 24.032692] type=1400 audit(1429216087.132:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=391 comm="apparmor_parser"
- [ 24.033342] type=1400 audit(1429216087.132:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=391 comm="apparmor_parser"
- [ 24.033349] type=1400 audit(1429216087.132:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=391 comm="apparmor_parser"
- [ 24.033695] type=1400 audit(1429216087.132:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=391 comm="apparmor_parser"
- [ 24.092807] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
- [ 24.092814] Disabling lock debugging due to kernel taint
- [ 24.110582] fglrx: module verification failed: signature and/or required key missing - tainting kernel
- [ 24.121974] cfg80211: Calling CRDA to update world regulatory domain
- [ 24.139469] <6>[fglrx] Maximum main memory to use for locked dma buffers: 5249 MBytes.
- [ 24.139598] <6>[fglrx] vendor: 1002 device: 9648 revision: 0 count: 1
- [ 24.149014] <6>[fglrx] ioport: bar 1, base 0x4000, size: 0x100
- [ 24.149708] <6>[fglrx] Kernel PAT support is enabled
- [ 24.149735] <6>[fglrx] module loaded - fglrx 15.20.2 [Feb 27 2015] with 1 minors
- [ 24.208028] Non-volatile memory driver v1.3
- [ 24.214443] thinkpad_acpi: ThinkPad ACPI Extras v0.25
- [ 24.214448] thinkpad_acpi: http://ibm-acpi.sf.net/
- [ 24.214450] thinkpad_acpi: ThinkPad BIOS 8IET41WW(1.14), EC unknown
- [ 24.214452] thinkpad_acpi: Lenovo ThinkPad E525, model 120032G
- [ 24.218949] thinkpad_acpi: Unsupported brightness interface, please contact ibm-acpi-devel@lists.sourceforge.net
- [ 24.219228] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
- [ 24.219230] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
- [ 24.273881] kvm: Nested Virtualization enabled
- [ 24.273887] kvm: Nested Paging enabled
- [ 24.275474] hda-intel 0000:00:01.1: Using LPIB position fix
- [ 24.275525] snd_hda_intel 0000:00:01.1: irq 46 for MSI/MSI-X
- [ 24.284071] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
- [ 24.284262] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
- [ 24.284548] hda-intel 0000:00:01.1: Enable sync_write for stable communication
- [ 24.289515] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
- [ 24.290130] hda-intel 0000:00:14.2: Using LPIB position fix
- [ 24.291121] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
- [ 24.298434] hda-intel 0000:00:14.2: Enable sync_write for stable communication
- [ 24.307397] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
- [ 24.312851] hda_codec: CX20590: BIOS auto-probing.
- [ 24.313293] autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
- [ 24.313295] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 24.313298] hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
- [ 24.313299] mono: mono_out=0x0
- [ 24.313305] inputs:
- [ 24.313307] Internal Mic=0x23
- [ 24.313309] Mic=0x1b
- [ 24.340912] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
- [ 24.341050] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
- [ 24.444837] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
- [ 24.445153] rtlwifi: wireless switch is on
- [ 24.548694] Linux video capture interface: v2.00
- [ 24.558132] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b257)
- [ 24.559994] input: Integrated Camera as /devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3:1.0/input/input12
- [ 24.560264] usbcore: registered new interface driver uvcvideo
- [ 24.560266] USB Video Class driver (1.1.1)
- [ 24.800222] cfg80211: World regulatory domain updated:
- [ 24.800228] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 24.800231] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 24.800234] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 24.800236] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 24.800238] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 24.800239] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 25.071789] Bluetooth: Core ver 2.17
- [ 25.071873] NET: Registered protocol family 31
- [ 25.071875] Bluetooth: HCI device and connection manager initialized
- [ 25.072387] Bluetooth: HCI socket layer initialized
- [ 25.072391] Bluetooth: L2CAP socket layer initialized
- [ 25.072397] Bluetooth: SCO socket layer initialized
- [ 25.092311] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 25.092317] Bluetooth: BNEP filters: protocol multicast
- [ 25.092329] Bluetooth: BNEP socket layer initialized
- [ 25.116592] Bluetooth: RFCOMM TTY layer initialized
- [ 25.116608] Bluetooth: RFCOMM socket layer initialized
- [ 25.116615] Bluetooth: RFCOMM ver 1.11
- [ 25.169262] type=1400 audit(1429216088.268:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=695 comm="apparmor_parser"
- [ 25.169274] type=1400 audit(1429216088.268:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=695 comm="apparmor_parser"
- [ 25.169492] init: failsafe main process (587) killed by TERM signal
- [ 25.169878] type=1400 audit(1429216088.268:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=695 comm="apparmor_parser"
- [ 25.627901] type=1400 audit(1429216088.724:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=819 comm="apparmor_parser"
- [ 25.724925] init: cups main process (705) killed by HUP signal
- [ 25.724982] init: cups main process ended, respawning
- [ 28.273107] init: samba-ad-dc main process (1113) terminated with status 1
- [ 28.439800] r8169 0000:01:00.0 eth0: link down
- [ 28.440486] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 28.440873] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 28.535857] vboxdrv: Found 2 processor cores.
- [ 28.540379] vboxdrv: fAsync=1 offMin=0xb1e9920 offMax=0xb1e9920
- [ 28.542280] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
- [ 28.542285] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
- [ 28.577451] vboxpci: IOMMU not found (not registered)
- [ 28.783180] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 28.783610] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 32.284596] wlan0: authenticate with 00:80:5a:4b:99:ef
- [ 32.304460] wlan0: send auth to 00:80:5a:4b:99:ef (try 1/3)
- [ 32.306420] wlan0: authenticated
- [ 32.308142] wlan0: associate with 00:80:5a:4b:99:ef (try 1/3)
- [ 32.323966] wlan0: RX AssocResp from 00:80:5a:4b:99:ef (capab=0x411 status=0 aid=3)
- [ 32.324149] wlan0: associated
- [ 32.324160] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 33.877687] fglrx_pci 0000:00:01.0: irq 47 for MSI/MSI-X
- [ 33.879197] <6>[fglrx] Firegl kernel thread PID: 1473
- [ 33.879442] <6>[fglrx] Firegl kernel thread PID: 1474
- [ 33.879578] <6>[fglrx] Firegl kernel thread PID: 1475
- [ 33.879694] <6>[fglrx] IRQ 47 Enabled
- [ 33.886739] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
- [ 33.886741] <6>[fglrx] Reserved FB block: Unshared offset:fab4000, size:4000
- [ 33.886743] <6>[fglrx] Reserved FB block: Unshared offset:fab8000, size:548000
- [ 33.886746] <6>[fglrx] Reserved FB block: Unshared offset:1fff3000, size:d000
- [ 34.011183] <6>[fglrx] ATIF platform detected with notification ID: 0x81
- [ 34.150977] mtrr: your BIOS has configured an incorrect mask, fixing it.
- [ 35.607132] init: plymouth-upstart-bridge main process ended, respawning
- [ 35.632163] init: plymouth-upstart-bridge main process (1564) terminated with status 1
- [ 35.632222] init: plymouth-upstart-bridge main process ended, respawning
- [ 43.180787] init: anacron main process (996) killed by TERM signal
- [ 55.395721] audit_printk_skb: 153 callbacks suppressed
- [ 55.395727] type=1400 audit(1429216118.489:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2526 comm="apparmor_parser"
- [ 55.395737] type=1400 audit(1429216118.489:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2526 comm="apparmor_parser"
- [ 55.396486] type=1400 audit(1429216118.493:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2526 comm="apparmor_parser"
- [ 148.548098] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 148.681886] usb 1-1: New USB device found, idVendor=0951, idProduct=1666
- [ 148.681893] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 148.681897] usb 1-1: Product: DataTraveler 3.0
- [ 148.681900] usb 1-1: Manufacturer: Kingston
- [ 148.681902] usb 1-1: SerialNumber: 60A44C3FABFFBE20596CCC33
- [ 148.959775] usb-storage 1-1:1.0: USB Mass Storage device detected
- [ 148.962565] scsi3 : usb-storage 1-1:1.0
- [ 148.963086] usbcore: registered new interface driver usb-storage
- [ 149.962405] scsi 3:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
- [ 149.963312] sd 3:0:0:0: Attached scsi generic sg2 type 0
- [ 149.965416] sd 3:0:0:0: [sdb] 30712320 512-byte logical blocks: (15.7 GB/14.6 GiB)
- [ 149.966149] sd 3:0:0:0: [sdb] Write Protect is off
- [ 149.966163] sd 3:0:0:0: [sdb] Mode Sense: 45 00 00 00
- [ 149.967325] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 180.944127] usb 1-1: reset high-speed USB device number 2 using ehci-pci
- [ 196.056091] usb 1-1: device descriptor read/64, error -110
- [ 211.272079] usb 1-1: device descriptor read/64, error -110
- [ 211.491485] usb 1-1: reset high-speed USB device number 2 using ehci-pci
- [ 226.600046] usb 1-1: device descriptor read/64, error -110
- [ 241.816235] usb 1-1: device descriptor read/64, error -110
- [ 242.032174] usb 1-1: reset high-speed USB device number 2 using ehci-pci
- [ 247.052398] usb 1-1: device descriptor read/8, error -110
- [ 252.174701] usb 1-1: device descriptor read/8, error -110
- [ 252.388232] usb 1-1: reset high-speed USB device number 2 using ehci-pci
- [ 257.408399] usb 1-1: device descriptor read/8, error -110
- [ 262.528280] usb 1-1: device descriptor read/8, error -110
- [ 262.632184] sd 3:0:0:0: Device offlined - not ready after error recovery
- [ 262.632199] usb 1-1: USB disconnect, device number 2
- [ 262.632219] sd 3:0:0:0: [sdb] Unhandled error code
- [ 262.632225] sd 3:0:0:0: [sdb]
- [ 262.632229] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
- [ 262.632234] sd 3:0:0:0: [sdb] CDB:
- [ 262.632238] Read(10): 28 00 00 00 00 00 00 00 08 00
- [ 262.632256] end_request: I/O error, dev sdb, sector 0
- [ 262.632264] Buffer I/O error on device sdb, logical block 0
- [ 262.632413] ldm_validate_partition_table(): Disk read failed.
- [ 262.632453] Dev sdb: unable to read RDB block 0
- [ 262.632511] sdb: unable to read partition table
- [ 262.632814] sd 3:0:0:0: [sdb] Attached SCSI removable disk
- [ 262.752207] usb 1-1: new high-speed USB device number 3 using ehci-pci
- [ 277.864306] usb 1-1: device descriptor read/64, error -110
- [ 293.080061] usb 1-1: device descriptor read/64, error -110
- [ 293.296122] usb 1-1: new high-speed USB device number 4 using ehci-pci
- [ 308.408137] usb 1-1: device descriptor read/64, error -110
- [ 323.624288] usb 1-1: device descriptor read/64, error -110
- [ 323.840059] usb 1-1: new high-speed USB device number 5 using ehci-pci
- [ 328.860209] usb 1-1: device descriptor read/8, error -110
- [ 333.980211] usb 1-1: device descriptor read/8, error -110
- [ 334.196056] usb 1-1: new high-speed USB device number 6 using ehci-pci
- [ 339.216259] usb 1-1: device descriptor read/8, error -110
- [ 344.336260] usb 1-1: device descriptor read/8, error -110
- [ 344.448165] hub 1-0:1.0: unable to enumerate USB device on port 1
- [ 344.800014] usb 4-1: new full-speed USB device number 2 using ohci-pci
- [ 359.936087] usb 4-1: device descriptor read/64, error -110
- [ 375.180054] usb 4-1: device descriptor read/64, error -110
- [ 375.424110] usb 4-1: new full-speed USB device number 3 using ohci-pci
- [ 390.560096] usb 4-1: device descriptor read/64, error -110
- [ 405.800257] usb 4-1: device descriptor read/64, error -110
- [ 406.040203] usb 4-1: new full-speed USB device number 4 using ohci-pci
- [ 411.060411] usb 4-1: device descriptor read/8, error -110
- [ 416.180971] usb 4-1: device descriptor read/8, error -110
- [ 416.420127] usb 4-1: new full-speed USB device number 5 using ohci-pci
- [ 421.440658] usb 4-1: device descriptor read/8, error -110
- [ 426.560125] usb 4-1: device descriptor read/8, error -110
- [ 426.664154] hub 4-0:1.0: unable to enumerate USB device on port 1
- [ 434.260229] init: systemd-logind main process (811) killed by TERM signal
- [ 603.545550] systemd-udevd[6971]: starting version 204
- [ 713.672331] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
- [ 713.716981] JFS: nTxBlock = 8192, nTxLock = 65536
- [ 713.763720] NTFS driver 2.1.30 [Flags: R/O MODULE].
- [ 713.842516] QNX4 filesystem 0.2.3 registered.
- [ 713.933064] xor: measuring software checksum speed
- [ 713.972016] prefetch64-sse: 3120.000 MB/sec
- [ 714.012016] generic_sse: 2842.000 MB/sec
- [ 714.012021] xor: using function: prefetch64-sse (3120.000 MB/sec)
- [ 714.092022] raid6: sse2x1 3026 MB/s
- [ 714.160058] raid6: sse2x2 4398 MB/s
- [ 714.228019] raid6: sse2x4 5171 MB/s
- [ 714.228023] raid6: using algorithm sse2x4 (5171 MB/s)
- [ 714.228025] raid6: using intx1 recovery algorithm
- [ 714.612428] bio: create slab <bio-1> at 1
- [ 714.624357] Btrfs loaded
- [ 716.806148] hfs: bad allocation block size 489806125
- [ 716.806155] hfs: can't find a HFS filesystem on dev sda5
- [ 1071.205455] hfs: bad allocation block size 489806125
- [ 1071.205471] hfs: can't find a HFS filesystem on dev sda5
- [ 1136.059773] hfs: bad allocation block size 489806125
- [ 1136.059791] hfs: can't find a HFS filesystem on dev sda5
- [ 1143.930584] hfs: bad allocation block size 489806125
- [ 1143.930601] hfs: can't find a HFS filesystem on dev sda5
- [ 1320.096411] usb 1-1: new high-speed USB device number 7 using ehci-pci
- [ 1320.230236] usb 1-1: New USB device found, idVendor=0951, idProduct=1666
- [ 1320.230249] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1320.230256] usb 1-1: Product: DataTraveler 3.0
- [ 1320.230261] usb 1-1: Manufacturer: Kingston
- [ 1320.230266] usb 1-1: SerialNumber: 60A44C3FABFFBE20596CCC33
- [ 1320.230831] usb-storage 1-1:1.0: USB Mass Storage device detected
- [ 1320.232850] scsi4 : usb-storage 1-1:1.0
- [ 1321.232998] scsi 4:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
- [ 1321.241087] sd 4:0:0:0: Attached scsi generic sg2 type 0
- [ 1321.241349] sd 4:0:0:0: [sdb] 30712320 512-byte logical blocks: (15.7 GB/14.6 GiB)
- [ 1321.242368] sd 4:0:0:0: [sdb] Write Protect is off
- [ 1321.242377] sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 00
- [ 1321.245611] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 1351.952383] usb 1-1: reset high-speed USB device number 7 using ehci-pci
- [ 1367.064177] usb 1-1: device descriptor read/64, error -110
- [ 1382.280158] usb 1-1: device descriptor read/64, error -110
- [ 1382.496152] usb 1-1: reset high-speed USB device number 7 using ehci-pci
- [ 1397.608191] usb 1-1: device descriptor read/64, error -110
- [ 1412.824417] usb 1-1: device descriptor read/64, error -110
- [ 1413.040379] usb 1-1: reset high-speed USB device number 7 using ehci-pci
- [ 1418.060349] usb 1-1: device descriptor read/8, error -110
- [ 1423.180316] usb 1-1: device descriptor read/8, error -110
- [ 1423.396189] usb 1-1: reset high-speed USB device number 7 using ehci-pci
- [ 1428.418120] usb 1-1: device descriptor read/8, error -110
- [ 1433.536458] usb 1-1: device descriptor read/8, error -110
- [ 1433.640537] sd 4:0:0:0: Device offlined - not ready after error recovery
- [ 1433.640554] sd 4:0:0:0: [sdb] Unhandled error code
- [ 1433.640556] sd 4:0:0:0: [sdb]
- [ 1433.640558] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
- [ 1433.640560] sd 4:0:0:0: [sdb] CDB:
- [ 1433.640562] Read(10): 28 00 00 00 00 18 00 00 08 00
- [ 1433.640568] end_request: I/O error, dev sdb, sector 24
- [ 1433.640572] Buffer I/O error on device sdb, logical block 3
- [ 1433.640583] usb 1-1: USB disconnect, device number 7
- [ 1433.640604] sd 4:0:0:0: rejecting I/O to offline device
- [ 1433.640620] sdb: unable to read partition table
- [ 1433.642027] sdb: detected capacity change from 15724707840 to 0
- [ 1433.642293] sd 4:0:0:0: [sdb] Attached SCSI removable disk
- [ 1433.768440] usb 1-1: new high-speed USB device number 8 using ehci-pci
- [ 1448.884182] usb 1-1: device descriptor read/64, error -110
- [ 1464.100227] usb 1-1: device descriptor read/64, error -110
- [ 1464.316219] usb 1-1: new high-speed USB device number 9 using ehci-pci
- [ 1490.356423] usb 1-1: new high-speed USB device number 10 using ehci-pci
- [ 1490.490567] usb 1-1: New USB device found, idVendor=0951, idProduct=1666
- [ 1490.490580] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1490.490587] usb 1-1: Product: DataTraveler 3.0
- [ 1490.490592] usb 1-1: Manufacturer: Kingston
- [ 1490.490597] usb 1-1: SerialNumber: 60A44C3FABFFBE20596CCC33
- [ 1490.491236] usb-storage 1-1:1.0: USB Mass Storage device detected
- [ 1490.496178] scsi5 : usb-storage 1-1:1.0
- [ 1491.497263] scsi 5:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
- [ 1491.497997] sd 5:0:0:0: Attached scsi generic sg2 type 0
- [ 1491.498932] sd 5:0:0:0: [sdb] 30712320 512-byte logical blocks: (15.7 GB/14.6 GiB)
- [ 1491.499686] sd 5:0:0:0: [sdb] Write Protect is off
- [ 1491.499695] sd 5:0:0:0: [sdb] Mode Sense: 45 00 00 00
- [ 1491.500417] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 1521.936370] usb 1-1: reset high-speed USB device number 10 using ehci-pci
- [ 1537.048202] usb 1-1: device descriptor read/64, error -110
- [ 1552.264192] usb 1-1: device descriptor read/64, error -110
- [ 1552.480209] usb 1-1: reset high-speed USB device number 10 using ehci-pci
- [ 1567.596229] usb 1-1: device descriptor read/64, error -110
- [ 1582.812052] usb 1-1: device descriptor read/64, error -110
- [ 1583.028054] usb 1-1: reset high-speed USB device number 10 using ehci-pci
- [ 1588.048407] usb 1-1: device descriptor read/8, error -110
- [ 1593.168272] usb 1-1: device descriptor read/8, error -110
- [ 1593.384129] usb 1-1: reset high-speed USB device number 10 using ehci-pci
- [ 1598.404330] usb 1-1: device descriptor read/8, error -110
- [ 1603.524420] usb 1-1: device descriptor read/8, error -110
- [ 1603.628348] usb 1-1: USB disconnect, device number 10
- [ 1603.628367] sd 5:0:0:0: Device offlined - not ready after error recovery
- [ 1603.628394] sd 5:0:0:0: [sdb] Unhandled error code
- [ 1603.628399] sd 5:0:0:0: [sdb]
- [ 1603.628404] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
- [ 1603.628409] sd 5:0:0:0: [sdb] CDB:
- [ 1603.628413] Read(10): 28 00 00 00 00 00 00 00 08 00
- [ 1603.628430] end_request: I/O error, dev sdb, sector 0
- [ 1603.628439] Buffer I/O error on device sdb, logical block 0
- [ 1603.628597] ldm_validate_partition_table(): Disk read failed.
- [ 1603.628644] Dev sdb: unable to read RDB block 0
- [ 1603.628710] sdb: unable to read partition table
- [ 1603.631540] sdb: detected capacity change from 15724707840 to 0
- [ 1603.637514] sd 5:0:0:0: [sdb] Attached SCSI removable disk
- [ 1603.756294] usb 1-1: new high-speed USB device number 11 using ehci-pci
- [ 1618.868444] usb 1-1: device descriptor read/64, error -110
- [ 1634.084422] usb 1-1: device descriptor read/64, error -110
- [ 1634.300461] usb 1-1: new high-speed USB device number 12 using ehci-pci
- [ 1649.412357] usb 1-1: device descriptor read/64, error -110
- [ 1664.628446] usb 1-1: device descriptor read/64, error -110
- [ 1664.848156] usb 1-1: new high-speed USB device number 13 using ehci-pci
- [ 1669.868411] usb 1-1: device descriptor read/8, error -110