- CCRID Product ProductLevel2 Title
- 2673073 ADW DBEDITOR Unable to check out schematic models in Allegro EDM Database Editor
- 2676082 ADW DBEDITOR Unable to check out schematic models in Allegro EDM Database Editor in release 17.4-2019, HotFix 030
- 2697393 ADW DBEDITOR Allegro EDM Database Editor is slow to use in release 17.4-2019
- 2697566 ADW DBEDITOR The release time for EDM models is significantly higher in release 17.4-2019, HotFix 030
- 2715878 ADW DBEDITOR Pulse 17.4 ISR031 DBEditor actions (check-in/out, release, etc.) take 20 minutes to several hours to perform.
- 2693395 ADW PART_MANAGER Placing a new part in a design shows the part as out of sync
- 2682310 ALLEGRO_EDITOR DATABASE Cadence 17.4 padstack definition on SKILL
- 2687247 ALLEGRO_EDITOR DATABASE Database gets corrupted when saved after moving a few components
- 2696887 ALLEGRO_EDITOR DATABASE DRC marker disappears despite being set to visible when the layer of the attached object is invisible
- 2673755 ALLEGRO_EDITOR DRC_CONSTR After editing the constraint region, the board file exits unexpectedly
- 2677369 ALLEGRO_EDITOR DRC_CONSTR Waived DRC errors reduce after updating DRC and saving the board file
- 2653278 ALLEGRO_EDITOR GRAPHICS GPU: Drill Figures do not display after generating Drill Legend
- 2671216 ALLEGRO_EDITOR GRAPHICS Components randomly disappear when selected or highlighted in Allegro Symphony
- 2683597 ALLEGRO_EDITOR INTERFACES PDF export uses net custom colors though 'Hide custom colors' is selected
- 2694276 ALLEGRO_EDITOR IN_DESIGN_ANA Aurora xtalk and reflection function function crash
- 2690737 ALLEGRO_EDITOR IPC Net short inconsistencies in the IPC-2581 and IPC-D-356 files
- 2693308 ALLEGRO_EDITOR PADS_IN Running Route Automatic or Route Editor results in error about router quitting with exit code of 5
- 2684420 ALLEGRO_EDITOR SHAPE Allegro PCB Editor crashes on adding teardrops
- 2701562 ALLEGRO_EDITOR SHAPE Cannot delete manually-added voids to the Cavity shape
- 2426055 APD DIE_STACK_EDI Die stack editor not showing bumps for bottom die of two-sided die
- 2693873 APD EXPORT_DATA Die text-out wizard lost the padstack rotation, 225 becomes 135 degree
- 2680371 APD UI_GENERAL Last command recall behavior is broken in release 17.4-2019
- 2692794 APD WLP WLP: Exporting TIV that has NC nets causes crash
- 2640078 CONSTRAINT_MGR OTHER Release 17.4-2019: Firefox is out-of-date
- 2691798 CONSTRAINT_MGR OTHER Update SKILL axlCNSSetSpacing and axlCNSSetSameNet to include constraint symbols to support expanded hole checks
- 1987745 CONSTRAINT_MGR XNET_DIFFPAIR System-level XNets require Design Link
- 2442218 PCB_LIBRARIAN SYMBOL_EDITOR Group edit note text not working when only filter note is enabled
- 2586760 PCB_LIBRARIAN SYMBOL_EDITOR Symbol Editor shows "pin name" inconsistently across interfaces
- 2265452 PSPICE MODELEDITOR DMI is not working in Model Editor
- 2476385 PSPICE MODELEDITOR Code imported in Model Editor using DMI translator gives compilation error
- 2484625 PSPICE MODELEDITOR PSpice DMI generation of Verilog-A model does not create .dll
- 2687849 PSPICE SIMULATOR Only one license used for parallel runs of psp_cmd on a machine by one user in batch mode
- 2706272 PULSE CORE Team collaboration license warning after Pulse upgrade
- 2714508 PULSE CORE Pulse server checkpoints are larger than they should be
- 2685462 PULSE R2PLM-WC 'Publish for Manufacturing' publishing failed with ERROR (RCR-2051)
- 2712708 PULSE R2PLM-WC ERROR PFM-1036 Cannot publish to Windchill. Expected STRING but was BEGIN_ARRAY at path $[0].children[509].parentBOMLink
- 2669222 PULSE R2PLM Tools - Publish for Manufacturing does not launch; displays Error(PFM-120): Cannot connect to the file system.
- 2676889 PULSE R2PLM 'Publish for Manufacturing' publishing fails with ERROR - RCR-2079
- 2689265 PULSE R2PLM 'Publish for Manufacturing' stops responding if the design path contains a space.
- 2695211 PULSE R2PLM 'Publish for Manufacturing' error RWC-12036 caused by using 'Alternates' in Variant Editor
- 2692357 PULSE SERVER Pulse server went down pending a problem with a database shape element
- 1924363 SIP_LAYOUT PLATING_BAR Plating bar check does not recognize net connected to Bar through another net
- 2701133 SYSTEM_CAPTURE ADHOC DESIMP-56 Error for few Users while other Users do not see this issue.
- 2683312 SYSTEM_CAPTURE ARCHIVER Archive command when run on a hierarchical design does not archive the design blocks
- 2703002 SYSTEM_CAPTURE CAPTURE_IMPOR Migrating Capture design into System Capture fails; error DESIMP-435 - import of designs with Netgroups is not supported
- 2715806 SYSTEM_CAPTURE DBDOCTOR DBDoctor not able to delete stale instances from the design.
- 2684226 SYSTEM_CAPTURE FIND_REPLACE Internal properties, CDS_LIBRARY_ID and CDS_LIBRARY_PHYSICAL_ID, displayed in Find and Replace
- 2706046 SYSTEM_CAPTURE IMPORT_BLOCK Place Schematic Block is grayed out in RMB menu of Symbols and Symbol1 under imported read only block.
- 2692703 SYSTEM_CAPTURE MODULE_ORDERI Module order is not preserved after importing design from DE-HDL to System Capture
- 2709017 SYSTEM_CAPTURE NAVLINKS Navlinks are not correctly aligned in 17.4 ISR032.
- 2693505 SYSTEM_CAPTURE ORCAD_EXPORT Converting of DE-HDL via System Capture to OrCAD creates incorrect netnames and connectivity
- 2679202 SYSTEM_CAPTURE PACKAGER Auto-packaging does not sequentially assign RefDes and skips over numbers
- 2680486 SYSTEM_CAPTURE PACKAGER Bypass or decoupling capacitor does not work if PHYS_DES_PREFIX of capacitor is not in chips but in ptf
- 2683837 SYSTEM_CAPTURE PACKAGER Pin Swap not working correctly on System Capture part
- 2700437 SYSTEM_CAPTURE PACKAGER Component with PACK_IGNORE
- 2699758 SYSTEM_CAPTURE PAGE_BORDER Changing a page border results in error message that components go outside the page border.
- 2701015 SYSTEM_CAPTURE PAGE_BORDER When choosing a page border in System Capture, correct page border graphic is not appearing on the canvas.
- 2685144 SYSTEM_CAPTURE PART_MANAGER Part Manager not updating a changed property
- 2687878 SYSTEM_CAPTURE PRINT Print command is not generating consistent output
- 2697580 SYSTEM_CAPTURE PRINT System Capture crashes when trying to print a Smart PDF
- 2700721 SYSTEM_CAPTURE PRINT System Capture crashes when trying to create smart print to pdf
- 2711328 SYSTEM_CAPTURE PRINT System Capture hangs when Descriptionting pdf for PNN mode
- 2700719 SYSTEM_CAPTURE PROJECT_EXPLO Esc key discards changes and closes the project
- 2681759 SYSTEM_CAPTURE REPORTS Schematic report does not work when executed on a hierarchical schematic.
- 2700634 SYSTEM_CAPTURE SCRIPTING db vs. dbx discrepancy in bbox for rotated components
- 2702505 SYSTEM_CAPTURE SCRIPTING sch::dbGetPage changes active tab if target was not open previously
- 2703195 SYSTEM_CAPTURE SCRIPTING dbIsValid vs. dbxIsValid discrepancy for deleted tables
- 2290678 SYSTEM_CAPTURE SELECTION Some times it is not possible to select segment of wire to delete.
- 2642297 SYSTEM_CAPTURE SELECTION Unwanted selection of graphics objects
- 2690864 SYSTEM_CAPTURE SELECTION Grouped objects deselected on clicking pins
- 2691200 SYSTEM_CAPTURE SELECTION How to fix the GND selection issue in attached project
- 2658906 SYSTEM_CAPTURE UI Support .mcm and .sip options in File Browsing from Export and Import PCB Layout
- 2687204 SYSTEM_CAPTURE UNIFIED_SEARC Hyperlinks in System Capture Unified Search breaks if search term is present in hyperlink url
- 2707672 SYSTEM_CAPTURE UNIFIED_SEARC Desktop Workflow comes up blank after installing ISR032
- 2692368 SYSTEM_CAPTURE WIRING "Two named nets cannot be connected" message keeps occurring when connecting nets in schematic.
- 2707426 SYSTEM_CAPTURE WIRING The connection tie dots remains after moving the circuit
- 2700168 TOPXP TOPXPLORER Results not generated in Linux for topology in Topology Workbench