- 2503993 Virtuoso exits unexpectedly after axlOutputsSetupTestFilterChanged in openXmlFile
- 2503776 VPM extraction reporting an error for discrete devices used as isolation cells
- 2502852 Location of the layout window moves when user clicks OK in the Update Connectivity Reference form
- 2502594 Export to CSV of empty Outputs tab shows Import from CSV error without displaying the Import form
- 2502304 Virtuoso exits unexpectedly during WSP Power Router when the attached technology library is missing
- 2502259 VPM adding ISO_data_power_pin attribute on a non isolated pin
- 2498598 Filters in the Outputs tab are not retained after switching to Explorer and then back to Assembler
- 2498508 The Context Menu - Group command is creating a 1x4 Modgen when there are only two symbols after stacking devices
- 2498134 Virtuoso exits unexpectedly when axlSubmitPointRunOptionsForm shows SDB error 2404
- 2498127 Virtuoso Power Manager to add user-defined attributes for new attributes in a NAND/NOR cell related power pin extraction
- 2498123 The Create Bus command generates pathSeg with pin purpose
- 2498087 Simulation fails on using the ICADVM20.1 ISR18 and ISR17 release versions in ICRP mode because the Spectre installation path is not found
- 2495567 Netlisting syntax errors from expressions in maestro views in IC6.1.8 ISR18
- 2495157 Virtuoso exits unexpectedly when axlSelectResultsTab is run
- 2494838 Stretch on via1 should move only adjacent metal layers
- 2494749 Stretching M2 wire does not work when weAutoDropVia is set to nil
- 2494702 VRF-EMX Wrong ports order in the 3D Viewer
- 2494580 Improve weTrackPatternCache::onPurge performances on dbClose
- 2494106 Unable to launch AMS simulations for maestro views because of unbound vlogifPSCellName in Virtuoso IC6.1.8 ISR17 in ICRP
- 2493579 Netlisting using ADE Explorer gives Error renameFile: no such file or directory
- 2492113 Allegro Import translator fails because metal resistor Pcell schematic is missing from the design
- 2491537 Performance issue when deleting virtual labels in short locator
- 2490865 Auto Via drops vias ignoring the mergedViaCornerToCorner violations
- 2489778 Extracted view creating floating ports in many-to-one net binding case
- 2489566 Incorrect column headers shown when importing data from Microsoft Excel
- 2489517 pathSeg splits only on one design partition and cannot be selected or edited in the other design partition
- 2489338 Issue with vmtLibImport due to .so libraries
- 2487784 Merge Fault Histories does not update fault values for faults that failed and re-run
- 2487577 Virtuoso exits unexpectedly in static API oaPurpose::find
- 2486393 Pre-run script breaks at netlisting stage
- 2485929 A segmentation fault is generated when Voltus-Fi is run with the stack via feature
- 2484888 Update Binding does not update pin binding
- 2483657 Include LSF job id in job.log
- 2483565 API apHierExtract() must not hardcode the default physConfig view to use 'physConfig'
- 2483487 Virtuoso RF Solution: EM extracted view fails due to top-level bus pin
- 2483431 Use Reference Netlist does not work when Optimize Single Point Run is enabled with LSCS mode
- 2483259 Running WSP Power Router on a design in ICADVM20.1 ISR18, only one of the library cell has stripes running continuously, the other one has spacing near cell edge
- 2483057 Voltus-Fi stops responding when generating the EM report
- 2483007 EAE extraction fails with error ID AGDPRP-31714
- 2481881 Results database of a read-only view vanishes after the maestro view is opened the third time
- 2481861 DSPF2ADE: dspf name mappings are not applied to Monte Carlo specify instances/devices
- 2481788 Simulation fails to start due to broken pipe error caused by starting axlBeanstalkd process
- 2481319 WSP tracks do not show for some vertical layers that include snapPatternDefs in the technology file
- 2481318 Virtuoso exits unexpectedly when HistoryNameForm is run
- 2480343 Running the Virtuoso Layout XL compliance check on top cell changes the scope for AB markers from Current Cellview to Depth
- 2480078 Sensitivity analysis on aging results does not work with LSCS
- 2479940 UNL creates multiple groundSensitivity props per pin - causes xmvlog W,DUPATR
- 2479884 AMS UNL netlister causes conflict between .amsbind.scs and netlist.vams file due to some Pcell variants
- 2479774 Virtuoso exits unexpectedly when using the stretch command for two or more wires
- 2479525 Auto via created on polygon overlap extends beyond metal overlap
- 2479211 Virtuoso RF-EMX Cross-fabric proc file fails due to package library name
- 2479083 Pin to Trunk uses vias with large enclosure values and multiple cut vias
- 2479080 Pin to Trunk leaves opens on the nets with trunks
- 2478978 Virtuoso becomes unresponsive when loading valid wsspDefs that have duplicate LPP entries on purpose track
- 2478538 The Via Configuration form in Wire Assistant shows via cut classes only from MSOA PDK and not from the base Virtuoso PDK
- 2478500 When a cavity layer is present, a dummy layer gets created during Allegro translation roundtrip
- 2478413 The Nominal column is missing from the Detail view
- 2478400 The calcVal expression is not evaluated when running simulation with filter plugin
- 2477952 Unnecessary Max Capacitance Constraint is created after the coupled capacitance estimation is transferred to constraints
- 2477310 In spite of the net selected in the navigator, the net name in the Create Wire form is lost after tapping a net
- 2477170 ADE EMIR Analysis Setup does not honor a forced non-default cds.lib
- 2476561 Virtuoso exits unexpectedly when trying to drag to reorder variables in Variables and Parameters assistant
- 2476449 The User Assistant window contents do not stay in the same position after click
- 2476383 AMSD: Design with MTS is not able to netlist in Virtuoso
- 2476289 Cannot migrate an ADE L state to maestro
- 2475878 SKILL-IPC slowdown when using ICADVM20.1 ISR17
- 2475634 Virtuoso stops responding while viewing the results in a read-only session when the results are being written in another editable session
- 2475064 The Current Limit and J/Jmax columns are not sorted correctly in the EM Calculator
- 2474480 eadModelGen -threads' does not generate eadTechFile
- 2474190 Specific CM setup prohibits design Check and Save in Constraint Manager Assistant
- 2473995 Improve the Spectre monitor log file show which history is running
- 2473753 Open .csv file UI is missing file name after the session is closed and reopened
- 2473714 Virtuoso stops responding when running variable sweeps for Monte Carlo simulation with filter plugin enabled
- 2473647 Virtuoso stops responding when running filter plugin with pre-run script enabled
- 2473491 LSCS issue where simulation jobs with finished netlists do not get started
- 2473069 eadModelGen -lsf_wait does not work
- 2473001 Quick Align option moves attached objects incorrectly
- 2472907 Virtuoso exits unexpectedly when axlDataViewSetDataInt is run in IC6.1.8 ISR16
- 2472904 Virtuoso exits unexpectedly when rdbLoadResults does not find simulation results
- 2472538 Retain parasitics of *|NET gnd! after the stitching of EMX solver and Quantus smart view
- 2472333 In ICADVM20.1 ISR19, the area estimator does not process libana Pcell
- 2472008 Fix coupled capacitor's sub-node and implement decoupling of capacitors to GROUND_NET after the stitching of EMX solver and Quantus smart view
- 2471334 Create Bus fails to connect to an already existing bus when one of the bus bits does not have connectivity
- 2470827 SDR is slow when drawing a net under autoTwig option on
- 2470586 Use a standard prefix for logging service that is started by LSCS
- 2469832 Die Export GUI does not reset to defaults and throws an error when Die Text Pin Numbering file is missing
- 2469304 pathSegs and vias forming a loop are removed when using the Create Wire command
- 2468948 Review and update the AMS UNL message AMS-2002
- 2468526 Limited functionality of direct Description form when noise separation is selected for hbnoise
- 2468397 Virtuoso Power Manager extracting incorrect pg_function in case of stacked power switches
- 2468393 Duplicate service jobs are created for LSCS netlisting
- 2468304 Virtuoso exits unexpectedly when a custom filter is deleted
- 2467915 Jobs not released with LSCS and short linger time (<30s)
- 2467701 Custom style trim shape convert API must check for read/write permissions before trying to edit cell view hierarchy
- 2467513 Unable to delete the bindkeyminus associated with function _weDecrTwigLayer
- 2467256 leHiStretch segmentation fault in leAdvEnterFun::deleteWireSet
- 2467135 Push routes into internal hierarchy disrupts the hierarchies
- 2465767 Use Reference Netlist does not work when Job Control Mode is LSCS and Optimize Single Point Run is checked
- 2465518 Virtuoso exits unexpectedly when a selected set of points is simulated through the Run Point Selection feature with a measurement across sweep points
- 2465400 Virtuoso SystemVerilog Netlister displays an error when a schematic net has a netType property value that conflicts with the propagated datatype value
- 2465220 Virtuoso exits unexpectedly when canceling simulations in ADE Assembler
- 2465096 Twig in M3 not being routed due to via enclosure in Simulation-driven Interactive routing
- 2465000 Print Comments -> SubcircuitPortConnections causes incorrect port connections in incremental netlist
- 2464684 In-design checks to enable user-provided node values to correctly extract the enable expression and reduce the floating level shifter violation count
- 2464460 Newly added operating point outputs are missing from Results tab after re-evaluation of results
- 2464351 No such file or directory error after renaming a file in ADE Explorer
- 2463471 Enable LSF suspend resume for LSCS netlisting
- 2463219 Quick Description All does not work for AMS simulation result
- 2463098 Enhance Pin to Trunk routing to connect the same twig to multiple trunks
- 2463020 Virtuoso Power Manager is unable to backtrace through inverter/buffer cells if hiercell configuration
- 2462734 Fault Simulation Long lines are split without backslash during netlisting step which causes Spectre failure
- 2462115 Smart view is not netlisted by a third-party simulator
- 2462066 Netlisting a smart view using a third-party netlister netlisting stops and an error gets
- 2462008 Trunk mesh: Consider centering the M1 mesh trunk to the center of the connection island to force M1 away from the extreme location of the pin bounding box
- 2461478 The Resources tab is not available in the ADE Explorer Job Policy Setup form when running with Command method
- 2461430 Turning intercepts off for vertical markers must retain x-axis crossing labels
- 2461231 Virtuoso exits unexpectedly when using dspf_include in the VDR flow
- 2461199 Performance issues with lazy results view update
- 2461095 Wire declaration for a bus net is not created in the Verilog netlist when hnlVerilogIgnoreTerm=t
- 2460788 Corners are showing up after importing maestro state even though corners are deselected during the import
- 2460785 Arithmetic exception while running Hammersley sampling in sensitivity analysis with more than 500 variables
- 2460739 Decimal values for variables and parameters get converted into an integer value in the netlist
- 2460726 Virtuoso Power Manager: Issue in isolation enable condition for a design
- 2460609 Property form selection tree is inconsistent in listing the items selected for keeping on canvas
- 2460168 The Import From SimVision command does not work when there is no line break at the end of .svcf file
- 2459958 Auto Via gives false minViaSpacing error when placing via next to bridge via when WSP grids are active
- 2459885 Virtuoso Space-based router caused minSideSpacing violation when routing the same design in ICADVM20.1 ISR17 as compared to ICADVM20.1 ISR16
- 2459717 Virtuoso exits unexpectedly when dbWriteSkill is used to dump graphical Pcells
- 2459675 Virtuoso exits unexpectedly when switching EAD contexts
- 2458300 db.strap_must_connect_pins fails to connect mustJoin terminals in ICADVM20.1 ISR16
- 2457605 Issue in Simulation-driven Interactive routing with twigs not choosing the correct target when routing from left to right
- 2457524 maeEditFaultRule('RB10' ?enableFaultCollapse 't) resets unexpected arguments ?faultDevices and ?pinNames
- 2457003 Trunk above the devices are connected to the first row of devices and not to all the rows
- 2455403 Right-click on simulation results in a maestro view shows ilGetString error in CIW
- 2455357 Virtuoso exits unexpectedly when closing a window in EAD
- 2454387 Support a new symbol generation for IC component when importing the package to Virtuoso
- 2453808 Can edit layout cellview without the VLS XL and VLS EXL license after the third license check failure
- 2453082 Problems using vmtLibImport on a .brd file
- 2452847 VRF - Cannot use remaster instances when resetOnRemaster is set to t
- 2452792 Promote Pins option is not working for different pins names
- 2452676 Auto via not created due to the minSpanLengthSpacing constraint
- 2452094 Support opParamExprList and optParamExprList for AMS backannotation
- 2451046 Virtuoso stops responding when opening an output log
- 2449955 Virtuoso RF: Incorrect positive ports generation for models using the Clarity 3D Solver simulator
- 2449685 The Update Parasitics & EM command does not update R and EM values
- 2449379 Loading a corner state should not enable or disable tests
- 2447898 Virtuoso stops responding when a pin is selected in Pin Planner
- 2447784 Virtuoso exits unexpectedly in ctuOccurrence::processInstTerm
- 2445985 Modgen's location jumps when placement rows exist and an Identical Guard Ring (IGR) is applied using the Auto Device Array form.
- 2445157 Results view update shows wrong values on scrolling
- 2444481 'Promote Label To Top' mode generates incorrect results if labels are on top of the same Pcell
- 2443981 SHE option not displayed in the drop-down menu when iRCX files are specified for EM Tech and Rules Files in ADE
- 2443409 Cycling control wire moves the cursor to the starting point while creating a bus
- 2442359 Config sweeps defined in ADE Assembler ignore Optimize Single Point Run in ADE Explorer and starts ICRP or Netlisting Service
- 2441852 Virtuoso exits unexpectedly when SHE analysis is run in Voltus-Fi with a DFII layermap instead of a Quantus run directory
- 2439629 AMS simulation fails due to the argument logStatus when using INCISIVE15.20.086 with IC6.1.8 ISR15 or a later version
- 2439091 Orphan DI constraint remains after creating a HC DI and using undo
- 2437676 Via Engine loses bridge via cutClass entries for wider wires when 'hollowVertical' parameter is specified
- 2436325 Heatmap assistant should memorize different temperature data loading from different multiple layout views
- 2434767 The Direct Description feature does not work as expected for buses in lower hierarchies
- 2434268 Virtuoso exits unexpectedly while running leHiDelete
- 2434191 Virtuoso exits unexpectedly while stretching a shape in Layout Editor
- 2433330 File name in DEF Out form is not updated to reflect name of the current cell
- 2432224 Include LSF job ID in spectre.out, job.log, and in ADE Assembler
- 2429471 Property Editor is slow to display CDF parameters when the number of parameters is large
- 2426796 Follow up on the issue of fabrics shifted during cross-fabric export
- 2426658 maeMergeFaultHistories does not give an error when a non-existent history is specified inВ?historiesToMerge
- 2423034 In IC6.1.8 ISR15, DPAR variables are not created for dependent parameters during parametric sweep in ADE Assembler
- 2419792 Open Run Log prints wrong information for a merged history
- 2417639 Session - Import command imports corners along with setup even if corners are excluded
- 2414492 Virtuoso IC6.1.8 does not launch and reports the 'Shared memory create failed' error
- 2411851 ADE Assembler: Import Histories from one cellview to another has issues
- 2411087 Incorrect results when using parametric simulation with a third-party PDK
- 2359822 vmtLibImport fails to import Allegro board file
- 2359697 Filters in the Outputs Setup tab are not retained after a simulation is run
- 2359123 The Extract xDSPF form in Voltus-Fi does not populate the values of environment variables specified in the .cdsenv or .cdsinit file
- 2356646 Virtuoso Space-based Router is creating minLength violations in a customer testcase
- 2353863 Virtuoso exits unexpectedly when connection by terminal positions is enabled in CDL Out
- 2351863 Virtuoso Visualization and Analysis XL: Markers do not align properly when the waveform window is resized
- 2349703 Automatic check-in of 95252 VM_integ_opt MATLAB ADE integration license
- 2349671 cphSetOccurPhysicalBinding is very slow
- 2347186 Link to cache issue is now resolved using virtuoso -restore.
- 2346405 Incorrect display of the results for implicit signals in ADE Explorer
- 2338382 Copy of connected shapes fails to copy shapes to another cellview unless connectivity reference is unset
- 2337051 Filters are lost when switching from Results tab to Outputs Setup tab after a simulation is run
- 2330405 Incorrect syntax of fault rules generated by ADE Assembler
- 2324678 Virtuoso ADE does not update the value of the parameter resultsDir in the exported OCEAN script
- 2323701 Dummy ignore properties get reset on moving their location
- 2301454 Measurement errors occur when calculating settlingTime
- 2293364 geAddTermProbe cannot highlight the terminal in level 1 when the instance name in level 0 is of bus type
- 2281260 Shift key for selection of multiple shapes for stretching, moving, etcetera is not working after some time
- 2265013 Constraint Manager: Suppress warning messages related to LX-2303
- 2249820 The Direct Description feature does not work as expected for buses in lower hierarchies
- 2243622 Virtuoso ADE should not create incorrect save statements - Remove the probelvl option in the Save By Subcircuit UI
- 2217458 Smaller Auto vias created even when the space rule is sufficient
- 2166976 Virtuoso exits unexpectedly when dbReplaceEnumProp is used
- 2114210 Rotated instance placement breaks during XStream In translation
- 1859638 Incorrect results of the OP function are displayed after a post-layout simulation run
- July 2021