- # smartctl -a /dev/da2
- smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-BETA1 amd64] (local build)
- Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.14 (AF)
- Device Model: ST2000DM001-1CH164
- Serial Number: Z1E3TPKW
- LU WWN Device Id: 5 000c50 050617970
- Firmware Version: CC26
- User Capacity: 2,000,398,934,016 bytes [2.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Fri May 18 14:39:39 2018 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 121) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: ( 584) seconds.
- Offline data collection
- capabilities: (0x73) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 228) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x3085) SCT Status supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 109 070 006 Pre-fail Always - 196956800
- 3 Spin_Up_Time 0x0003 096 096 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 58
- 5 Reallocated_Sector_Ct 0x0033 095 095 010 Pre-fail Always - 6944
- 7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 32335236
- 9 Power_On_Hours 0x0032 054 054 000 Old_age Always - 41086
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 58
- 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 17028
- 188 Command_Timeout 0x0032 100 054 000 Old_age Always - 0 0 167
- 189 High_Fly_Writes 0x003a 093 093 000 Old_age Always - 7
- 190 Airflow_Temperature_Cel 0x0022 066 053 045 Old_age Always - 34 (Min/Max 31/39)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 50
- 193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 7267
- 194 Temperature_Celsius 0x0022 034 047 000 Old_age Always - 34 (0 19 0 0 0)
- 197 Current_Pending_Sector 0x0012 081 013 000 Old_age Always - 3200
- 198 Offline_Uncorrectable 0x0010 081 013 000 Old_age Offline - 3200
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 40281h+05m+40.492s
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 294310686996
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 158675324658
- SMART Error Log Version: 1
- ATA Error Count: 28112 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 28112 occurred at disk power-on lifetime: 41068 hours (1711 days + 4 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 00 10 ff ff ff 4f 00 3d+21:23:59.305 WRITE FPDMA QUEUED
- 61 00 08 ff ff ff 4f 00 3d+21:23:59.305 WRITE FPDMA QUEUED
- 61 00 48 ff ff ff 4f 00 3d+21:23:59.304 WRITE FPDMA QUEUED
- 61 00 28 ff ff ff 4f 00 3d+21:23:59.304 WRITE FPDMA QUEUED
- 61 00 08 ff ff ff 4f 00 3d+21:23:59.304 WRITE FPDMA QUEUED
- Error 28111 occurred at disk power-on lifetime: 41068 hours (1711 days + 4 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 00 10 ff ff ff 4f 00 3d+21:23:59.305 WRITE FPDMA QUEUED
- 61 00 08 ff ff ff 4f 00 3d+21:23:59.305 WRITE FPDMA QUEUED
- 61 00 48 ff ff ff 4f 00 3d+21:23:59.304 WRITE FPDMA QUEUED
- 61 00 28 ff ff ff 4f 00 3d+21:23:59.304 WRITE FPDMA QUEUED
- 61 00 08 ff ff ff 4f 00 3d+21:23:59.304 WRITE FPDMA QUEUED
- Error 28110 occurred at disk power-on lifetime: 41068 hours (1711 days + 4 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 00 ff ff ff 4f 00 3d+21:23:56.333 READ FPDMA QUEUED
- ea 00 00 00 00 00 00 00 3d+21:23:56.260 FLUSH CACHE EXT
- 61 00 08 ff ff ff 4f 00 3d+21:23:56.237 WRITE FPDMA QUEUED
- 61 00 08 ff ff ff 4f 00 3d+21:23:56.237 WRITE FPDMA QUEUED
- 61 00 08 50 03 00 40 00 3d+21:23:56.237 WRITE FPDMA QUEUED
- Error 28109 occurred at disk power-on lifetime: 41068 hours (1711 days + 4 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 00 ff ff ff 4f 00 3d+21:23:56.333 READ FPDMA QUEUED
- ea 00 00 00 00 00 00 00 3d+21:23:56.260 FLUSH CACHE EXT
- 61 00 08 ff ff ff 4f 00 3d+21:23:56.237 WRITE FPDMA QUEUED
- 61 00 08 ff ff ff 4f 00 3d+21:23:56.237 WRITE FPDMA QUEUED
- 61 00 08 50 03 00 40 00 3d+21:23:56.237 WRITE FPDMA QUEUED
- Error 28108 occurred at disk power-on lifetime: 41068 hours (1711 days + 4 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 08 ff ff ff 4f 00 3d+21:23:53.107 READ FPDMA QUEUED
- 60 00 00 ff ff ff 4f 00 3d+21:23:53.085 READ FPDMA QUEUED
- 61 00 10 ff ff ff 4f 00 3d+21:23:53.084 WRITE FPDMA QUEUED
- 61 00 10 ff ff ff 4f 00 3d+21:23:53.084 WRITE FPDMA QUEUED
- 61 00 10 10 02 00 40 00 3d+21:23:53.084 WRITE FPDMA QUEUED
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed: read failure 90% 40975 302021288
- # 2 Short offline Completed: read failure 10% 40974 302021288
- # 3 Short offline Interrupted (host reset) 00% 40603 -
- # 4 Short offline Completed: read failure 10% 40492 311016664
- # 5 Extended offline Completed: read failure 90% 40159 3553219272
- # 6 Short offline Completed: read failure 90% 40159 3553219272
- # 7 Short offline Completed without error 00% 29292 -
- # 8 Short offline Completed without error 00% 29268 -
- # 9 Short offline Completed without error 00% 29244 -
- #10 Short offline Completed without error 00% 29220 -
- #11 Short offline Completed without error 00% 29196 -
- #12 Extended offline Completed without error 00% 29178 -
- #13 Short offline Completed without error 00% 29172 -
- #14 Short offline Completed without error 00% 29148 -
- #15 Short offline Completed without error 00% 29124 -
- #16 Short offline Completed without error 00% 29100 -
- #17 Short offline Completed without error 00% 29076 -
- #18 Short offline Completed without error 00% 29052 -
- #19 Short offline Completed without error 00% 29028 -
- #20 Extended offline Completed without error 00% 29009 -
- #21 Short offline Completed without error 00% 29004 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.