- --------------------------------------------
- CCRID Product Title
- --------------------------------------------
- 2726999 BROADBAND_SPICE S-parameter model checker: Passivity and causality report from any file
- 2718214 CELSIUS Mapping relationship issue occurs in the vertical .cfd file
- 2647312 CLARITY The airbox is different when using parametric import and non-parametric import in Clarity 3D Workbench
- 2653811 CLARITY Standard volume/surface seeding has no impact on mesh
- 2686605 CLARITY Clarity 3D Layout gets stuck in the AFS stage
- 2704441 CLARITY Clarity AFS0 is not efficient
- 2712819 CLARITY Optimality simulation stopped with an error for a 16 parameters case
- 2722868 CLARITY Clarity 3D Workbench quasi static solver succeeds in 3D inductance extraction but fails in sweeping mode
- 2731236 CLARITY S-parameter results are not correct for one signal net
- 2733867 CLARITY Parametric import in Clarity 3D Workbench does not preserve metal shapes
- 2734558 CLARITY Low frequency sweep is failing in Clarity
- 2741029 CLARITY Unnecessary license checkouts cause LMESH to fail on AWS using HF3
- 2729682 OPTIMIZEPI The EMI Optimization option remains disabled despite complete setup
- 2722499 POWERDC Applying the PowerTree topology in PowerDC does not complete the PowerTree application wizard
- 2728437 POWERDC Using the Tcl command DisplaNodesOnCircuitNodePads causes the GUI to exit unexpectedly
- 2728449 POWERDC The Tcl command DisplaNodesOnCircuitNodePads shows nodes inside vias
- 2709420 POWERSI Frequency sampling is incorrect from the DCfitted_customized model
- 2722007 POWERSI Capacitor model assignment error occurs in PowerSI
- 2723559 POWERSI PowerSI exits unexpectedly during shape processing
- 2734811 POWERSI DC_Fitted snp output file is missing in PDN Extraction using PowerSI
- 2693519 SIGRITY_SUITE Fanout routing moves to other layer when swept in Clarity 3D Layout HSSO flow
- 2706495 SIGRITY_SUITE XtractIM produces different mapping file starting from Sigrity2022.1 HF2
- 2727959 SIGRITY_SUITE Pad Stack window in PowerSI does not display correctly
- 2730550 SIGRITY_SUITE The port generation flow for multiterminal circuits in Clarity 3D Layout does not generate the S-parameter results
- 2730949 SIGRITY_SUITE Failed to check port connection error occurs in Clarity 3D Layout when the Cut & Stitch method is used
- 2737253 SPEED2000 SPEEDEM failed to read IBIS model
- 2682592 TRANSLATOR Pads are missing after translation
- 2741685 TRANSLATOR Change in padstack names when importing .tgz file into PowerSI