1. $ sudo smartctl -a /dev/sda
  2. [sudo] password for arch:
  3. smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.9.4-arch1-1] (local build)
  4. Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
  6. === START OF INFORMATION SECTION ===
  7. Model Family: Seagate Barracuda 7200.10
  8. Device Model: ST3160215AS
  9. Serial Number: 6RAAA8P8
  10. Firmware Version: 4.AAB
  11. User Capacity: 160,041,885,696 bytes [160 GB]
  12. Sector Size: 512 bytes logical/physical
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
  15. Local Time is: Fri Nov 6 16:41:24 2020 IST
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  22. General SMART Values:
  23. Offline data collection status: (0x82) Offline data collection activity
  24. was completed without error.
  25. Auto Offline Data Collection: Enabled.
  26. Self-test execution status: ( 0) The previous self-test routine completed
  27. without error or no self-test has ever
  28. been run.
  29. Total time to complete Offline
  30. data collection: ( 430) seconds.
  31. Offline data collection
  32. capabilities: (0x5b) SMART execute Offline immediate.
  33. Auto Offline data collection on/off support.
  34. Suspend Offline collection upon new
  35. command.
  36. Offline surface scan supported.
  37. Self-test supported.
  38. No Conveyance Self-test supported.
  39. Selective Self-test supported.
  40. SMART capabilities: (0x0003) Saves SMART data before entering
  41. power-saving mode.
  42. Supports SMART auto save timer.
  43. Error logging capability: (0x01) Error logging supported.
  44. General Purpose Logging supported.
  45. Short self-test routine
  46. recommended polling time: ( 1) minutes.
  47. Extended self-test routine
  48. recommended polling time: ( 54) minutes.
  50. SMART Attributes Data Structure revision number: 10
  51. Vendor Specific SMART Attributes with Thresholds:
  52. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  53. 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0
  54. 3 Spin_Up_Time 0x0003 100 097 000 Pre-fail Always - 0
  55. 4 Start_Stop_Count 0x0032 089 089 020 Old_age Always - 12237
  56. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  57. 7 Seek_Error_Rate 0x000f 088 060 030 Pre-fail Always - 713692648
  58. 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 19865
  59. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  60. 12 Power_Cycle_Count 0x0032 088 088 020 Old_age Always - 12379
  61. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 115
  62. 189 High_Fly_Writes 0x003a 090 090 000 Old_age Always - 10
  63. 190 Airflow_Temperature_Cel 0x0022 059 050 045 Old_age Always - 41 (Min/Max 41/42)
  64. 194 Temperature_Celsius 0x0022 041 050 000 Old_age Always - 41 (0 20 0 0 0)
  65. 195 Hardware_ECC_Recovered 0x001a 073 067 000 Old_age Always - 6074783
  66. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 2
  67. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 2
  68. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  69. 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
  70. 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
  72. SMART Error Log Version: 1
  73. ATA Error Count: 121 (device log contains only the most recent five errors)
  74. CR = Command Register [HEX]
  75. FR = Features Register [HEX]
  76. SC = Sector Count Register [HEX]
  77. SN = Sector Number Register [HEX]
  78. CL = Cylinder Low Register [HEX]
  79. CH = Cylinder High Register [HEX]
  80. DH = Device/Head Register [HEX]
  81. DC = Device Command Register [HEX]
  82. ER = Error register [HEX]
  83. ST = Status register [HEX]
  84. Powered_Up_Time is measured from power on, and printed as
  85. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  86. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  88. Error 121 occurred at disk power-on lifetime: 520 hours (21 days + 16 hours)
  89. When the command that caused the error occurred, the device was active or idle.
  91. After command completion occurred, registers were:
  92. ER ST SC SN CL CH DH
  93. -- -- -- -- -- -- --
  94. 40 51 00 72 5a 0d e0 Error: UNC at LBA = 0x000d5a72 = 875122
  96. Commands leading to the command that caused the error were:
  97. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  98. -- -- -- -- -- -- -- -- ---------------- --------------------
  99. 25 00 01 72 5a 0d e0 00 00:08:52.207 READ DMA EXT
  100. 35 00 01 71 5a 0d e0 00 00:08:52.207 WRITE DMA EXT
  101. 25 00 01 71 5a 0d e0 00 00:08:55.415 READ DMA EXT
  102. 25 00 01 72 5a 0d e0 00 00:08:55.415 READ DMA EXT
  103. 25 00 01 71 5a 0d e0 00 00:08:55.391 READ DMA EXT
  105. Error 120 occurred at disk power-on lifetime: 520 hours (21 days + 16 hours)
  106. When the command that caused the error occurred, the device was active or idle.
  108. After command completion occurred, registers were:
  109. ER ST SC SN CL CH DH
  110. -- -- -- -- -- -- --
  111. 40 51 00 72 5a 0d e0 Error: UNC at LBA = 0x000d5a72 = 875122
  113. Commands leading to the command that caused the error were:
  114. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  115. -- -- -- -- -- -- -- -- ---------------- --------------------
  116. 25 00 01 72 5a 0d e0 00 00:08:52.207 READ DMA EXT
  117. 25 00 01 71 5a 0d e0 00 00:08:52.207 READ DMA EXT
  118. 25 00 01 70 5a 0d e0 00 00:08:52.206 READ DMA EXT
  119. 25 00 01 6f 5a 0d e0 00 00:08:52.206 READ DMA EXT
  120. 25 00 01 6e 5a 0d e0 00 00:08:52.206 READ DMA EXT
  122. Error 119 occurred at disk power-on lifetime: 520 hours (21 days + 16 hours)
  123. When the command that caused the error occurred, the device was active or idle.
  125. After command completion occurred, registers were:
  126. ER ST SC SN CL CH DH
  127. -- -- -- -- -- -- --
  128. 40 51 00 72 5a 0d e0 Error: UNC at LBA = 0x000d5a72 = 875122
  130. Commands leading to the command that caused the error were:
  131. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  132. -- -- -- -- -- -- -- -- ---------------- --------------------
  133. 41 00 01 72 5a 0d e0 00 00:43:33.999 READ VERIFY SECTOR(S) (w/o retry) [OBS-5]
  134. 41 00 01 71 5a 0d e0 00 00:43:33.991 READ VERIFY SECTOR(S) (w/o retry) [OBS-5]
  135. 41 00 01 70 5a 0d e0 00 00:43:33.983 READ VERIFY SECTOR(S) (w/o retry) [OBS-5]
  136. 41 00 01 6f 5a 0d e0 00 00:43:33.983 READ VERIFY SECTOR(S) (w/o retry) [OBS-5]
  137. 41 00 01 6e 5a 0d e0 00 00:43:33.974 READ VERIFY SECTOR(S) (w/o retry) [OBS-5]
  139. Error 118 occurred at disk power-on lifetime: 520 hours (21 days + 16 hours)
  140. When the command that caused the error occurred, the device was active or idle.
  142. After command completion occurred, registers were:
  143. ER ST SC SN CL CH DH
  144. -- -- -- -- -- -- --
  145. 40 51 00 72 5a 0d e0 Error: UNC at LBA = 0x000d5a72 = 875122
  147. Commands leading to the command that caused the error were:
  148. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  149. -- -- -- -- -- -- -- -- ---------------- --------------------
  150. 42 00 00 00 5a 0d e0 00 00:43:30.570 READ VERIFY SECTOR(S) EXT
  151. 42 00 00 00 59 0d e0 00 00:43:30.595 READ VERIFY SECTOR(S) EXT
  152. 42 00 00 00 58 0d e0 00 00:43:30.592 READ VERIFY SECTOR(S) EXT
  153. 42 00 00 00 57 0d e0 00 00:43:30.591 READ VERIFY SECTOR(S) EXT
  154. 42 00 00 00 56 0d e0 00 00:43:30.589 READ VERIFY SECTOR(S) EXT
  156. Error 117 occurred at disk power-on lifetime: 519 hours (21 days + 15 hours)
  157. When the command that caused the error occurred, the device was active or idle.
  159. After command completion occurred, registers were:
  160. ER ST SC SN CL CH DH
  161. -- -- -- -- -- -- --
  162. 40 51 00 72 5a 0d e0 Error: UNC at LBA = 0x000d5a72 = 875122
  164. Commands leading to the command that caused the error were:
  165. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  166. -- -- -- -- -- -- -- -- ---------------- --------------------
  167. 25 03 40 70 5a 0d e0 00 00:02:40.034 READ DMA EXT
  168. 25 03 01 00 00 00 e0 00 00:02:40.023 READ DMA EXT
  169. 35 03 08 8f dc 94 e0 00 00:02:40.023 WRITE DMA EXT
  170. 35 03 10 f7 23 91 e0 00 00:02:40.023 WRITE DMA EXT
  171. 25 03 1e 81 71 90 e0 00 00:02:40.023 READ DMA EXT
  173. SMART Self-test log structure revision number 1
  174. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  175. # 1 Extended offline Completed without error 00% 13440 -
  176. # 2 Short offline Completed without error 00% 12632 -
  177. # 3 Short offline Completed without error 00% 11525 -
  178. # 4 Extended offline Completed without error 00% 10486 -
  179. # 5 Short offline Completed without error 00% 3978 -
  180. # 6 Extended offline Aborted by host 90% 3715 -
  181. # 7 Short offline Completed without error 00% 3714 -
  182. # 8 Extended offline Completed: read failure 90% 118 11322720
  183. # 9 Extended offline Completed: read failure 90% 118 11322720
  184. #10 Short offline Completed: read failure 90% 118 11322720
  185. 3 of 3 failed self-tests are outdated by newer successful extended offline self-test # 1
  187. SMART Selective self-test log data structure revision number 1
  188. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  189. 1 0 0 Not_testing
  190. 2 0 0 Not_testing
  191. 3 0 0 Not_testing
  192. 4 0 0 Not_testing
  193. 5 0 0 Not_testing
  194. Selective self-test flags (0x0):
  195. After scanning selected spans, do NOT read-scan remainder of disk.
  196. If Selective self-test is pending on power-up, resume after 0 minute delay.